From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1goPev-0005Ql-OG for ath10k@lists.infradead.org; Tue, 29 Jan 2019 09:26:26 +0000 From: Rakesh Pillai Subject: [PATCH] ath10k: Fix hw-restart crash inject mode for WCN3990 Date: Tue, 29 Jan 2019 14:56:07 +0530 Message-Id: <1548753967-2233-1-git-send-email-pillair@codeaurora.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Cc: Rakesh Pillai , linux-wireless@vger.kernel.org The hw-restart crash inject mode is a special mode, where there is no crash generated in the firmware, but instead the driver restarts the firmware. In order to restart WCN3990 firmware, the driver needs to send qmi_wlan_disable message followed by the qmi_wlan_enable message to the WCN3990 firmware. Currently the qmi_wlan_disable message is not sent to the WCN3990 firmware when hw-restart crash is injected, which causes the firmware to crash when the driver sends qmi_wlan_enable message during ath10k_restart. Send qmi_wlan_disable to the WCN3990 firmware when the hw-restart crash is injected via debugfs. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai --- drivers/net/wireless/ath/ath10k/snoc.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index 54efe6b..cceb6d4 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -1000,7 +1000,16 @@ static int ath10k_snoc_wlan_enable(struct ath10k *ar) static void ath10k_snoc_wlan_disable(struct ath10k *ar) { - if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); + + /* If both ATH10K_FLAG_CRASH_FLUSH and ATH10K_SNOC_FLAG_RECOVERY + * flags are not set, it means that the driver has restarted + * due to a crash inject via debugfs. In this case, the driver + * needs to restart the firmware and hence send qmi wlan disable, + * during the driver restart sequence. + */ + if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags) || + !test_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags)) ath10k_qmi_wlan_disable(ar); } -- 2.7.4 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k