ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Wen Gong <wgong@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH] ath10k: reduce transmit msdu count
Date: Fri,  1 Feb 2019 10:17:09 +0800	[thread overview]
Message-ID: <1548987429-14008-1-git-send-email-wgong@codeaurora.org> (raw)

From: Alagu Sankar <alagusankar@silex-india.com>

Reduce the transmit MSDU count for SDIO, to match with the descriptors
as used by the firmware. This also acts as a high watermark level for
transmit. Too many packets to the firmware results in transmit overflow
interrupt.

It only affect SDIO chip, it will not cause functionaly changes to
other hardware.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00005-QCARMSWP-1.

Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c    | 6 +++++-
 drivers/net/wireless/ath/ath10k/hw.h      | 1 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 +-
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 22cbe9a..fee4ec1 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2309,7 +2309,11 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		ar->max_num_stations = TARGET_TLV_NUM_STATIONS;
 		ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS;
 		ar->max_num_tdls_vdevs = TARGET_TLV_NUM_TDLS_VDEVS;
-		ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC;
+		if (ar->hif.bus == ATH10K_BUS_SDIO)
+			ar->htt.max_num_pending_tx =
+				TARGET_TLV_NUM_MSDU_DESC_HL;
+		else
+			ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC;
 		ar->wow.max_num_patterns = TARGET_TLV_NUM_WOW_PATTERNS;
 		ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV |
 			WMI_STAT_PEER;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 1b5da27..c012523 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -724,6 +724,7 @@ struct ath10k_hw_ops {
 #define TARGET_TLV_NUM_TDLS_VDEVS		1
 #define TARGET_TLV_NUM_TIDS			((TARGET_TLV_NUM_PEERS) * 2)
 #define TARGET_TLV_NUM_MSDU_DESC		(1024 + 32)
+#define TARGET_TLV_NUM_MSDU_DESC_HL		64
 #define TARGET_TLV_NUM_WOW_PATTERNS		22
 #define TARGET_TLV_MGMT_NUM_MSDU_DESC		(50)
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index ad4114a..35fb852 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1611,7 +1611,7 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
 	cfg->rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(0);
 	cfg->vow_config = __cpu_to_le32(0);
 	cfg->gtk_offload_max_vdev = __cpu_to_le32(2);
-	cfg->num_msdu_desc = __cpu_to_le32(TARGET_TLV_NUM_MSDU_DESC);
+	cfg->num_msdu_desc = __cpu_to_le32(ar->htt.max_num_pending_tx);
 	cfg->max_frag_entries = __cpu_to_le32(2);
 	cfg->num_tdls_vdevs = __cpu_to_le32(TARGET_TLV_NUM_TDLS_VDEVS);
 	cfg->num_tdls_conn_table_entries = __cpu_to_le32(0x20);
-- 
1.9.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2019-02-01  2:17 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-01  2:17 Wen Gong [this message]
2019-02-07 14:56 ` [PATCH] ath10k: reduce transmit msdu count Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1548987429-14008-1-git-send-email-wgong@codeaurora.org \
    --to=wgong@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox