ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Wen Gong <wgong@codeaurora.org>
Subject: [PATCH 5/5] ath10k: enable QCA6174 hw3.2 SDIO hardware
Date: Fri, 26 Apr 2019 09:41:11 +0300	[thread overview]
Message-ID: <1556260871-2919-6-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1556260871-2919-1-git-send-email-kvalo@codeaurora.org>

From: Wen Gong <wgong@codeaurora.org>

After implementing PN replay check we can enable SDIO support on QCA6174.
Tested with client mode on all security modes, and fragmentation as well. AP
mode does not work yet.

Also tone down the warning about SDIO being not ready yet.

Tested on QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. AP mode
is not working yet.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 27 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  1 +
 drivers/net/wireless/ath/ath10k/sdio.c |  2 +-
 3 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index cfd7bb29a1ec..525a7ff87bf4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -154,6 +154,33 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.fw_diag_ce_download = false,
 	},
 	{
+		.id = QCA6174_HW_3_2_VERSION,
+		.dev_id = QCA6174_3_2_DEVICE_ID,
+		.bus = ATH10K_BUS_SDIO,
+		.name = "qca6174 hw3.2 sdio",
+		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
+		.uart_pin = 19,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
+		.cal_data_len = 0,
+		.fw = {
+			.dir = QCA6174_HW_3_0_FW_DIR,
+			.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
+			.board_size = QCA6174_BOARD_DATA_SZ,
+			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
+		},
+		.hw_ops = &qca6174_ops,
+		.hw_clk = qca6174_clk,
+		.target_cpu_freq = 176000000,
+		.decap_align_bytes = 4,
+		.n_cipher_suites = 8,
+		.num_peers = 10,
+		.ast_skid_limit = 0x10,
+		.num_wds_entries = 0x20,
+		.uart_pin_workaround = true,
+	},
+	{
 		.id = QCA6174_HW_2_1_VERSION,
 		.dev_id = QCA6164_2_1_DEVICE_ID,
 		.bus = ATH10K_BUS_PCI,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index a92fce1bb6f0..248cfb4e53c3 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -24,6 +24,7 @@ enum ath10k_bus {
 #define QCA988X_2_0_DEVICE_ID   (0x003c)
 #define QCA6164_2_1_DEVICE_ID   (0x0041)
 #define QCA6174_2_1_DEVICE_ID   (0x003e)
+#define QCA6174_3_2_DEVICE_ID   (0x0042)
 #define QCA99X0_2_0_DEVICE_ID   (0x0040)
 #define QCA9888_2_0_DEVICE_ID	(0x0056)
 #define QCA9984_1_0_DEVICE_ID	(0x0046)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 30102090e282..a2c1bad67b5b 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2059,7 +2059,7 @@ static int ath10k_sdio_probe(struct sdio_func *func,
 	}
 
 	/* TODO: remove this once SDIO support is fully implemented */
-	ath10k_warn(ar, "WARNING: ath10k SDIO support is incomplete, don't expect anything to work!\n");
+	ath10k_warn(ar, "WARNING: ath10k SDIO support is work-in-progress, problems may arise!\n");
 
 	return 0;
 
-- 
2.7.4


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

      parent reply	other threads:[~2019-04-26  6:41 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-26  6:41 [PATCH 0/5] ath10k: implement PN replay protection for SDIO Kalle Valo
2019-04-26  6:41 ` [PATCH 1/5] ath10k: add struct for high latency PN replay protection Kalle Valo
2019-04-29 14:39   ` Kalle Valo
2019-04-26  6:41 ` [PATCH 2/5] ath10k: add handler for HTT_T2H_MSG_TYPE_SEC_IND event Kalle Valo
2019-04-26  6:41 ` [PATCH 3/5] ath10k: add PN replay protection for high latency devices Kalle Valo
2019-04-26  6:41 ` [PATCH 4/5] ath10k: add fragmentation handler " Kalle Valo
2019-04-26  6:41 ` Kalle Valo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1556260871-2919-6-git-send-email-kvalo@codeaurora.org \
    --to=kvalo@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=wgong@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox