From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail27.static.mailgun.info ([104.130.122.27]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jkqSV-0000Ip-3Y for ath10k@lists.infradead.org; Mon, 15 Jun 2020 14:51:37 +0000 From: Kalle Valo Subject: [PATCH v6] ath10k: provide survey info as accumulated data Date: Mon, 15 Jun 2020 17:51:26 +0300 Message-Id: <1592232686-28712-1-git-send-email-kvalo@codeaurora.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, 24601deerej@gmail.com, sven@narfation.org, markus.theil@tu-ilmenau.de From: Venkateswara Naralasetty It is expected that the returned counters by .get_survey are monotonic increasing. But the data from ath10k gets reset to zero regularly. Channel active/busy time are then showing incorrect values (less than previous or sometimes zero) for the currently active channel during successive survey dump commands. example: $ iw dev wlan0 survey dump Survey data from wlan0 frequency: 5180 MHz [in use] channel active time: 54995 ms channel busy time: 432 ms channel receive time: 0 ms channel transmit time: 59 ms ... $ iw dev wlan0 survey dump Survey data from wlan0 frequency: 5180 MHz [in use] channel active time: 32592 ms channel busy time: 254 ms channel receive time: 0 ms channel transmit time: 0 ms ... The correct way to handle this is to use the non-clearing WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will then accumulate the survey data and handle wrap arounds. Tested on: * QCA9984 hw1.0 firmware 10.4-3.5.3-00057 * QCA988X hw2.0 firmware 10.2.4-1.0-00047 * QCA9888 hw2.0 firmware 10.4-3.9.0.2-00024 * QCA4019 hw1.0 firmware 10.4-3.6-00140 Fixes: fa7937e3d5c2 ("ath10k: update bss channel survey information") Signed-off-by: Venkateswara Naralasetty Tested-by: Markus Theil Tested-by: John Deere <24601deerej@gmail.com> [sven@narfation.org: adjust commit message] Signed-off-by: Sven Eckelmann Signed-off-by: Kalle Valo --- v6: * cc linux-wireless so patchwork sees this v5: * add additional tested devices * restructure commit message v4: * updated signed-off-by v3: * Rebased on TOT and added Tested-by Everything expect QCA9984 hw1.0 firmware 10.4-3.5.3-00057 was also tested by Sven. drivers/net/wireless/ath/ath10k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 919d15584d4a..77daca67a8e1 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -7283,7 +7283,7 @@ ath10k_mac_update_bss_chan_survey(struct ath10k *ar, struct ieee80211_channel *channel) { int ret; - enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR; + enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ; lockdep_assert_held(&ar->conf_mutex); -- 2.7.4 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k