ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v2] ath10k: enable firmware STA quick kickout
Date: Mon, 20 Jan 2014 11:01:46 +0200	[thread overview]
Message-ID: <20140120090146.5500.12995.stgit@potku.adurom.net> (raw)

Firmware has a feature to track if the associated STA is not acking the frames.
When that happens, the firmware sends WMI_PEER_STA_KICKOUT_EVENTID event to the
host. Enable that to faster detect when a STA has left BSS without sending a
deauth frame.

Also set huge keepalive timeouts to avoid using the keepalive functionality in
the firmware.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |   12 +++++++
 drivers/net/wireless/ath/ath10k/mac.c  |   58 ++++++++++++++++++++++++++++----
 drivers/net/wireless/ath/ath10k/wmi.c  |   22 ++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h  |    4 ++
 4 files changed, 88 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index ade1781..e6308f4 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -46,6 +46,18 @@
 
 #define ATH10K_MAX_NUM_MGMT_PENDING 128
 
+/* number of failed packets */
+#define ATH10K_KICKOUT_THRESHOLD 50
+
+/*
+ * Use insanely high numbers to make sure that the firmware implementation
+ * won't start, we have the same functionality already in hostapd. Unit
+ * is seconds.
+ */
+#define ATH10K_KEEPALIVE_MIN_IDLE 3747
+#define ATH10K_KEEPALIVE_MAX_IDLE 3895
+#define ATH10K_KEEPALIVE_MAX_UNRESPONSIVE 3900
+
 struct ath10k;
 
 struct ath10k_skb_cb {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 7aa6c4d..9f90816 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -339,6 +339,50 @@ static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
 	return 0;
 }
 
+static int ath10k_mac_set_kickout(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 param;
+	int ret;
+
+	param = ar->wmi.pdev_param->sta_kickout_th;
+	ret = ath10k_wmi_pdev_set_param(ar, param,
+					ATH10K_KICKOUT_THRESHOLD);
+	if (ret) {
+		ath10k_warn("Failed to set kickout threshold: %d\n", ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_min_idle_inactive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MIN_IDLE);
+	if (ret) {
+		ath10k_warn("Failed to set keepalive minimum idle time : %d\n",
+			    ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_max_idle_inactive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MAX_IDLE);
+	if (ret) {
+		ath10k_warn("Failed to set keepalive maximum idle time: %d\n",
+			    ret);
+		return ret;
+	}
+
+	param = ar->wmi.vdev_param->ap_keepalive_max_unresponsive_time_secs;
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param,
+					ATH10K_KEEPALIVE_MAX_UNRESPONSIVE);
+	if (ret) {
+		ath10k_warn("Failed to set keepalive maximum unresponsive time: %d\n",
+			    ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int  ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
 {
 	struct ath10k *ar = arvif->ar;
@@ -2214,7 +2258,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	enum wmi_sta_powersave_param param;
 	int ret = 0;
-	u32 value, param_id;
+	u32 value;
 	int bit;
 	u32 vdev_param;
 
@@ -2307,12 +2351,12 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 			goto err_vdev_delete;
 		}
 
-		param_id = ar->wmi.pdev_param->sta_kickout_th;
-
-		/* Disable STA KICKOUT functionality in FW */
-		ret = ath10k_wmi_pdev_set_param(ar, param_id, 0);
-		if (ret)
-			ath10k_warn("Failed to disable STA KICKOUT\n");
+		ret = ath10k_mac_set_kickout(arvif);
+		if (ret) {
+			ath10k_warn("Failed to set kickout parameters: %d\n",
+				    ret);
+			goto err_peer_delete;
+		}
 	}
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 712a606..0bc8543 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1116,7 +1116,27 @@ static void ath10k_wmi_event_vdev_stopped(struct ath10k *ar,
 static void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar,
 					      struct sk_buff *skb)
 {
-	ath10k_dbg(ATH10K_DBG_WMI, "WMI_PEER_STA_KICKOUT_EVENTID\n");
+	struct wmi_peer_sta_kickout_event *ev;
+	struct ieee80211_sta *sta;
+
+	ev = (struct wmi_peer_sta_kickout_event *)skb->data;
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi event peer sta kickout %pM\n",
+		   ev->peer_macaddr.addr);
+
+	rcu_read_lock();
+
+	sta = ieee80211_find_sta_by_ifaddr(ar->hw, ev->peer_macaddr.addr, NULL);
+	if (!sta) {
+		ath10k_warn("Spurious quick kickout for STA %pM\n",
+			    ev->peer_macaddr.addr);
+		goto exit;
+	}
+
+	ieee80211_report_low_ack(sta, 10);
+
+exit:
+	rcu_read_unlock();
 }
 
 /*
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 4b5e7d3..9dc90c5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4039,6 +4039,10 @@ struct wmi_chan_info_event {
 	__le32 cycle_count;
 } __packed;
 
+struct wmi_peer_sta_kickout_event {
+	struct wmi_mac_addr peer_macaddr;
+} __packed;
+
 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
 
 /* FIXME: empirically extrapolated */


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2014-01-20  9:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-20  9:01 Kalle Valo [this message]
2014-01-20  9:08 ` [PATCH v2] ath10k: enable firmware STA quick kickout Kalle Valo
2014-01-23 12:54 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140120090146.5500.12995.stgit@potku.adurom.net \
    --to=kvalo@qca.qualcomm.com \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox