From: Mohammed Shafi Shajakhan <mohammed@codeaurora.org>
To: Lil Evil <Lil_Evil@gmx.de>
Cc: ath10k@lists.infradead.org
Subject: Re: ath10k temperature issue with late2012 macbook pro
Date: Wed, 18 May 2016 13:38:37 +0530 [thread overview]
Message-ID: <20160518080837.GA22219@atheros-ThinkPad-T61> (raw)
In-Reply-To: <trinity-50a39f6d-5fed-40e5-9232-8426f29b33e3-1463519079223@3capp-gmx-bs70>
Hi,
On Tue, May 17, 2016 at 11:04:39PM +0200, Lil Evil wrote:
> Hi all,
>
> I am running an MikroTik R11e-5HacT - High-power triple-chain miniPCI-e Card (routerboard.com/R11e-5HacT) in an apu.2c4 (http://pcengines.ch/apu2c4.htm) - so far so good.
>
> I recently came to realise that the temperature of the AC module goes up to 95°C reported by sensors during heavy use. Readings seems legitimate verifying by physical touch.
>
> I played with transmit power and reduced from 30db to 21db with marginal difference of 5°C.
>
> The specs give a max temp of 65°C, so that doesnt seem very healthy.
>
> I have tried various firmware and kernel versions without any difference
>
> The issue seems to be related to my MAC client:
>
> Windows PC 802.11n transfering at 25MB/sec - WiFi module between 67°C - 70°C
> MAC (next to Windows PC) 802.11n transfering at 15MB/sec - WiFi module reaches 85°C within 60 sec
> IPAD 802.11ac transfering at 20MB/sec - WiFi module between 67°C - 70°C
>
>
> Any pointers welcome?
[shafi] May be you can check this
http://www.spinics.net/lists/linux-wireless/msg130753.html
and get more information
>
> Cheers
> lIl
>
>
> Debug info:
>
>
> root@xenial:~# uname -a
>
> Linux xenial 4.6.0 #1 SMP Mon May 16 13:53:14 CEST 2016 x86_64 x86_64 x86_64 GNU/Linux
>
>
>
> sensors:
>
> ath10k_hwmon-pci-0500
>
> Adapter: PCI adapter
>
> temp1: +84.0°C
>
>
>
> lspci -v:
>
> 05:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
>
> Subsystem: Device 19b6:d03c
>
> Flags: bus master, fast devsel, latency 0, IRQ 57
>
> Memory at fe200000 (64-bit, non-prefetchable) [size=2M]
>
> Expansion ROM at fe400000 [disabled] [size=64K]
>
> Capabilities: [40] Power Management version 2
>
> Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
>
> Capabilities: [70] Express Endpoint, MSI 00
>
> Capabilities: [100] Advanced Error Reporting
>
> Capabilities: [140] Virtual Channel
>
> Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
>
> Kernel driver in use: ath10k_pci
>
> Kernel modules: ath10k_pci
>
>
>
> firmware:
>
> May 17 11:28:29 xenial kernel: ath10k_pci 0000:05:00.0: Unknown FW IE: 30
>
> May 17 11:28:29 xenial kernel: ath10k_pci 0000:05:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 19b6:d03c
>
> May 17 11:28:29 xenial kernel: ath10k_pci 0000:05:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
>
> May 17 11:28:29 xenial kernel: ath10k_pci 0000:05:00.0: firmware ver 10.2.4.97-1-ct-swc-D-002-5558e8 api 5 features wmi-10.x,wmi-10.2,raw-mode,adaptive-cca,mfp crc32 56488b5c
>
>
>
> Macbook client:
>
> Interfaces:
>
> en0:
>
> Card Type: AirPort Extreme (0x14E4, 0x10F)
>
> Firmware Version: Broadcom BCM43xx 1.0 (7.21.95.175.1a6)
>
>
>
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
prev parent reply other threads:[~2016-05-18 8:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-17 21:04 ath10k temperature issue with late2012 macbook pro Lil Evil
2016-05-18 8:08 ` Mohammed Shafi Shajakhan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160518080837.GA22219@atheros-ThinkPad-T61 \
--to=mohammed@codeaurora.org \
--cc=Lil_Evil@gmx.de \
--cc=ath10k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox