From: Mohammed Shafi Shajakhan <mohammed@codeaurora.org>
To: "K.Mani" <sailormani@gmail.com>
Cc: ath10k@lists.infradead.org
Subject: Re: QCA8994 booting failed
Date: Tue, 3 Jan 2017 18:11:40 +0530 [thread overview]
Message-ID: <20170103124140.GA8576@atheros-ThinkPad-T61> (raw)
In-Reply-To: <CACBNxUFLP9aTm-T043Cb37nGojt8DT9SGvSkQPL6v7w+=8Jcug@mail.gmail.com>
On Tue, Jan 03, 2017 at 06:03:13PM +0530, K.Mani wrote:
> I'm using Annapurna board(Alpine soc V1) on kernel-linux-3.10.20 openWRT.
> The board has two QCA9984 wlan boards(2.4 & 5 Ghz). I downloaded the
> firmware files from net.
> Used, insmod ath10k_core.ko skip_otp=1 also tried without skip_otp param
>
> The wlan 5.0Ghz board bootsup & connects to ssid, pings perfectly.
> But the 2.4Ghz board fails to bootup, stating "failed to fetch board file".
kindly try the board-2.bin
https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA9984/hw1.0/
>
> [ 209.550433] ath10k_pci 0001:01:00.0: bmi lz stream start address 0x0
> [ 209.550669] ath10k_pci 0001:01:00.0: bmi execute address 0x1234 param 0x10
> [ 210.942841] ath10k_pci 0001:01:00.0: bmi execute result 0x1000
> [ 210.942848] ath10k_pci 0001:01:00.0: boot get otp board id result
> 0x00001000 board_id 4 chip_id 0
> [ 210.942856] ath10k_pci 0001:01:00.0: boot using board name
> 'bus=pci,bmi-chip-id=0,bmi-board-id=4'
> [ 210.942930] ath10k_pci 0001:01:00.0: board name
> [ 210.942938] ath10k_pci 0001:01:00.0: 00000000: 62 75 73 3d 70 63 69
> 2c 62 6d 69 2d 63 68 69 70 bus=pci,bmi-chip
> [ 210.942944] ath10k_pci 0001:01:00.0: 00000010: 2d 69 64 3d 30 2c 62
> 6d 69 2d 62 6f 61 72 64 2d -id=0,bmi-board-
> [ 210.942950] ath10k_pci 0001:01:00.0: 00000020: 69 64 3d 31
> id=1
> [ 210.942957] ath10k_pci 0001:01:00.0: failed to fetch board data for
> bus=pci,bmi-chip-id=0,bmi-board-id=4 from
> ath10k/QCA9984/hw1.0/board-2.n
> [ 271.089644] ath10k_pci 0001:01:00.0: failed to fetch board data
> [ 271.095555] ath10k_pci 0001:01:00.0: failed to fetch board file: -2
>
> One difference I found from the bootlogs
> For 5.0Ghz log shows, bmi execute result 0x400
> But 2.4Ghz log shows, bmi execute result 0x1000
> Could this be the issue, if so how to fix it?
>
> Help needed.
>
> Thanks
> Mani
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2017-01-03 12:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-03 12:33 QCA8994 booting failed K.Mani
2017-01-03 12:41 ` Mohammed Shafi Shajakhan [this message]
2017-01-03 13:12 ` K.Mani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170103124140.GA8576@atheros-ThinkPad-T61 \
--to=mohammed@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=sailormani@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox