From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1f1TIW-0006hw-CB for ath10k@lists.infradead.org; Thu, 29 Mar 2018 08:52:41 +0000 MIME-Version: 1.0 Subject: Re: [1/2] ath10k: enable QCA6174/QCA9377 to read the chip temperature From: Kalle Valo In-Reply-To: <1521183942-4291-1-git-send-email-ryanhsu@codeaurora.org> References: <1521183942-4291-1-git-send-email-ryanhsu@codeaurora.org> Message-Id: <20180329085230.1DBF8602FC@smtp.codeaurora.org> Date: Thu, 29 Mar 2018 08:52:30 +0000 (UTC) List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ryanhsu@codeaurora.org Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org ryanhsu@codeaurora.org wrote: > The firmware of QCA6174/QCA9377 already support the feature, just enable > it to be able to handle the get_temperature command and process the event. > > You can read the temperature by using the hwmon interface, > > cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input > > Verified with the following hardware and software combination, > QCA6174, only firmware-4.bin doesn't support this, otherwise all support. > QCA9377, all the firmwares upstreamed support this command > > Signed-off-by: Ryan Hsu > Signed-off-by: Kalle Valo 2 patches applied to ath-next branch of ath.git, thanks. e98199a8c27f ath10k: enable QCA6174/QCA9377 to read the chip temperature e3814bec380f ath10k: add FW API 6 firmware image for QCA9377 -- https://patchwork.kernel.org/patch/10286439/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k