ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Erik Stromdahl <erik.stromdahl@gmail.com>
To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
	ath10k@lists.infradead.org
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [RFC v5 09/12] ath10k: htt: RX ring config HL support
Date: Sun,  3 Jun 2018 20:20:26 +0200	[thread overview]
Message-ID: <20180603182029.8914-10-erik.stromdahl@gmail.com> (raw)
In-Reply-To: <20180603182029.8914-1-erik.stromdahl@gmail.com>

Special HTT RX ring config message used by high latency
devices.

The main difference between HL and LL is that HL devices
do not use shared memory between device and host and thus,
no host paddr's are added to the RX config message.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 52 ++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 7c7e434fcde5..740e8740844e 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -934,6 +934,57 @@ static int ath10k_htt_send_rx_ring_cfg_64(struct ath10k_htt *htt)
 	return 0;
 }
 
+static int ath10k_htt_send_rx_ring_cfg_hl(struct ath10k_htt *htt)
+{
+	struct ath10k *ar = htt->ar;
+	struct sk_buff *skb;
+	struct htt_cmd *cmd;
+	struct htt_rx_ring_setup_ring32 *ring;
+	const int num_rx_ring = 1;
+	u16 flags;
+	int len;
+	int ret;
+
+	/*
+	 * the HW expects the buffer to be an integral number of 4-byte
+	 * "words"
+	 */
+	BUILD_BUG_ON(!IS_ALIGNED(HTT_RX_BUF_SIZE, 4));
+	BUILD_BUG_ON((HTT_RX_BUF_SIZE & HTT_MAX_CACHE_LINE_SIZE_MASK) != 0);
+
+	len = sizeof(cmd->hdr) + sizeof(cmd->rx_setup_32.hdr)
+	    + (sizeof(*ring) * num_rx_ring);
+	skb = ath10k_htc_alloc_skb(ar, len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, len);
+
+	cmd = (struct htt_cmd *)skb->data;
+	ring = &cmd->rx_setup_32.rings[0];
+
+	cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_RX_RING_CFG;
+	cmd->rx_setup_32.hdr.num_rings = 1;
+
+	flags = 0;
+	flags |= HTT_RX_RING_FLAGS_MSDU_PAYLOAD;
+	flags |= HTT_RX_RING_FLAGS_UNICAST_RX;
+	flags |= HTT_RX_RING_FLAGS_MULTICAST_RX;
+
+	memset(ring, 0, sizeof(*ring));
+	ring->rx_ring_len = __cpu_to_le16(HTT_RX_RING_SIZE_MIN);
+	ring->rx_ring_bufsize = __cpu_to_le16(HTT_RX_BUF_SIZE);
+	ring->flags = __cpu_to_le16(flags);
+
+	ret = ath10k_htc_send(&htt->ar->htc, htt->eid, skb);
+	if (ret) {
+		dev_kfree_skb_any(skb);
+		return ret;
+	}
+
+	return 0;
+}
+
 int ath10k_htt_h2t_aggr_cfg_msg(struct ath10k_htt *htt,
 				u8 max_subfrms_ampdu,
 				u8 max_subfrms_amsdu)
@@ -1569,6 +1620,7 @@ static const struct ath10k_htt_tx_ops htt_tx_ops_64 = {
 };
 
 static const struct ath10k_htt_tx_ops htt_tx_ops_hl = {
+	.htt_send_rx_ring_cfg = ath10k_htt_send_rx_ring_cfg_hl,
 	.htt_send_frag_desc_bank_cfg = ath10k_htt_send_frag_desc_bank_cfg_32,
 };
 
-- 
2.17.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2018-06-03 18:22 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-03 18:20 [RFC v5 00/12] ath10k high latency Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 01/12] ath10k: add struct ath10k_bus_params Erik Stromdahl
2018-09-06 16:16   ` Kalle Valo
     [not found]   ` <20180906161624.B4751606FA@smtp.codeaurora.org>
2018-09-06 18:22     ` Erik Stromdahl
2018-10-06 11:34       ` Kalle Valo
2018-06-03 18:20 ` [RFC v5 02/12] ath10k: add device type enum to ath10k_bus_params Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 03/12] ath10k: add bus type check in ath10k_init_hw_params Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 04/12] ath10k: use hw_params.num_peers for num_tids in TLV init Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 05/12] ath10k: add per target config of max_num_peers Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 06/12] ath10k: DMA related fixes for high latency devices Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 07/12] ath10k: add HTT TX HL ops Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 08/12] ath10k: add HTT RX " Erik Stromdahl
2018-06-03 18:20 ` Erik Stromdahl [this message]
2018-06-03 18:20 ` [RFC v5 10/12] ath10k: htt: High latency TX support Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 11/12] ath10k: htt: High latency RX support Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 12/12] ath10k: wmi: disable softirq's while calling ieee80211_rx Erik Stromdahl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180603182029.8914-10-erik.stromdahl@gmail.com \
    --to=erik.stromdahl@gmail.com \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@qca.qualcomm.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox