ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: kbuild test robot <lkp@intel.com>
To: Sathishkumar Muruganandam <murugana@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>,
	kbuild-all@01.org, ath10k@lists.infradead.org
Subject: [ath6kl:ath11k-bringup 30/60] drivers/net/wireless/ath/ath11k/wmi.c:5612:6: sparse: symbol 'ath11k_pdev_ctl_failsafe_check_event' was not declared. Should it be static?
Date: Fri, 22 Mar 2019 02:59:52 +0800	[thread overview]
Message-ID: <201903220231.XMGhENMe%lkp@intel.com> (raw)

tree:   https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath11k-bringup
head:   3c46e2415dac1f744640d0e42594fb27de804df9
commit: 886785f92306cdbfd31ee4fc6391d5dbf02beb5b [30/60] ath11k: fix acs survey
reproduce:
        # apt-get install sparse
        git checkout 886785f92306cdbfd31ee4fc6391d5dbf02beb5b
        make ARCH=x86_64 allmodconfig
        make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'


sparse warnings: (new ones prefixed by >>)

   include/linux/slab.h:664:13: sparse: undefined identifier '__builtin_mul_overflow'
   drivers/net/wireless/ath/ath11k/wmi.c:203:5: sparse: symbol 'ath11k_wmi_cmd_send_nowait' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:470:5: sparse: symbol 'ath11k_service_ready_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:716:6: sparse: symbol 'ath11k_wmi_put_wmi_channel' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:939:6: sparse: symbol 'ath11k_send_green_ap_ps_enable_cmd' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:970:6: sparse: symbol 'ath11k_send_gpio_config_cmd' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:1008:5: sparse: symbol 'ath11k_send_gpio_output_cmd' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:1038:5: sparse: symbol 'ath11k_send_vdev_set_fwtest_param_cmd' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:2358:5: sparse: symbol 'ath11k_send_set_sta_ps_mode_cmd' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:2392:5: sparse: symbol 'ath11k_send_set_mimops_cmd' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:2449:5: sparse: symbol 'ath11k_send_set_smps_params_cmd' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:2555:5: sparse: symbol 'ath11k_send_bcn_buf_ll_cmd' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3207:5: sparse: symbol 'ath11k_service_ready_ext_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3224:5: sparse: symbol 'ath11k_pull_vdev_start_resp_tlv' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3298:5: sparse: symbol 'ath11k_pull_reg_chan_list_update_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3412:5: sparse: symbol 'ath11k_pull_peer_del_resp_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3443:5: sparse: symbol 'ath11k_pull_bcn_tx_status_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3472:5: sparse: symbol 'ath11k_pull_vdev_stopped_param_tlv' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3533:5: sparse: symbol 'ath11k_pull_mgmt_rx_params_tlv' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3624:5: sparse: symbol 'ath11k_pull_mgmt_tx_compl_param_tlv' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3796:5: sparse: symbol 'ath11k_pull_scan_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3829:5: sparse: symbol 'ath11k_pull_peer_sta_kickout_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3856:5: sparse: symbol 'ath11k_pull_roam_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3904:5: sparse: symbol 'ath11k_pull_chan_info_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3942:5: sparse: symbol 'ath11k_pull_pdev_bss_chan_info_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:3982:5: sparse: symbol 'ath11k_pull_vdev_install_key_compl_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:4014:5: sparse: symbol 'ath11k_pull_peer_assoc_conf_ev' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:4043:6: sparse: symbol 'ath11k_wmi_pull_pdev_stats_base' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:4084:6: sparse: symbol 'ath11k_wmi_pull_pdev_stats_rx' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:4360:8: sparse: symbol 'ath11k_wmi_fw_stats_num_bcn' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:4774:5: sparse: symbol 'ath11k_reg_chan_list_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:4925:5: sparse: symbol 'ath11k_ready_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:4941:6: sparse: symbol 'ath11k_peer_delete_resp_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:4971:6: sparse: symbol 'ath11k_vdev_start_resp_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5010:6: sparse: symbol 'ath11k_bcn_tx_status_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5029:6: sparse: symbol 'ath11k_vdev_stopped_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5056:6: sparse: symbol 'ath11k_mgmt_rx_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5171:6: sparse: symbol 'ath11k_mgmt_tx_compl_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5202:6: sparse: symbol 'ath11k_scan_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5261:6: sparse: symbol 'ath11k_peer_sta_kickout_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5310:6: sparse: symbol 'ath11k_roam_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5356:6: sparse: symbol 'ath11k_chan_info_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5429:6: sparse: symbol 'ath11k_pdev_bss_chan_info_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5503:6: sparse: symbol 'ath11k_vdev_install_key_compl_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5542:6: sparse: symbol 'ath11k_service_available_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5578:6: sparse: symbol 'ath11k_peer_assoc_conf_event' was not declared. Should it be static?
   drivers/net/wireless/ath/ath11k/wmi.c:5604:6: sparse: symbol 'ath11k_update_stats_event' was not declared. Should it be static?
>> drivers/net/wireless/ath/ath11k/wmi.c:5612:6: sparse: symbol 'ath11k_pdev_ctl_failsafe_check_event' was not declared. Should it be static?
   include/linux/slab.h:664:13: sparse: call with no type!
   drivers/net/wireless/ath/ath11k/wmi.c:4876:9: sparse: context imbalance in 'ath11k_reg_chan_list_event' - different lock contexts for basic block

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2019-03-22  3:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-21 18:59 kbuild test robot [this message]
2019-03-21 18:59 ` [RFC PATCH ath6kl] ath11k: ath11k_pdev_ctl_failsafe_check_event() can be static kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201903220231.XMGhENMe%lkp@intel.com \
    --to=lkp@intel.com \
    --cc=ath10k@lists.infradead.org \
    --cc=kbuild-all@01.org \
    --cc=kvalo@codeaurora.org \
    --cc=murugana@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox