From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from durin.narfation.org ([79.140.41.39]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hafkL-0005xb-8z for ath10k@lists.infradead.org; Tue, 11 Jun 2019 12:19:27 +0000 From: Sven Eckelmann Subject: [PATCH] ath10k: fix max antenna gain unit Date: Tue, 11 Jun 2019 14:19:10 +0200 Message-Id: <20190611121910.27643-1-sven@narfation.org> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Cc: Michal Kazior , linux-wireless@vger.kernel.org, Sven Eckelmann From: Sven Eckelmann Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB steps). This isn't the case for max_antenna_gain - which is still expected by the firmware as dB. The firmware is converting it from dB to the internal (twicepower) representation when it calculates the limits of a channel. This can be seen in tpc_stats when configuring "12" as max_antenna_gain. Instead of the expected 12 (6 dB), the tpc_stats shows 24 (12 dB). Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057. Fixes: 02256930d9b8 ("ath10k: use proper tx power unit") Signed-off-by: Sven Eckelmann --- Cc: Michal Kazior drivers/net/wireless/ath/ath10k/mac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 9c703d287333..35d026a2772a 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1008,7 +1008,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) arg.channel.min_power = 0; arg.channel.max_power = channel->max_power * 2; arg.channel.max_reg_power = channel->max_reg_power * 2; - arg.channel.max_antenna_gain = channel->max_antenna_gain * 2; + arg.channel.max_antenna_gain = channel->max_antenna_gain; reinit_completion(&ar->vdev_setup_done); @@ -1450,7 +1450,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, arg.channel.min_power = 0; arg.channel.max_power = chandef->chan->max_power * 2; arg.channel.max_reg_power = chandef->chan->max_reg_power * 2; - arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2; + arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain; if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { arg.ssid = arvif->u.ap.ssid; @@ -3105,7 +3105,7 @@ static int ath10k_update_channel_list(struct ath10k *ar) ch->min_power = 0; ch->max_power = channel->max_power * 2; ch->max_reg_power = channel->max_reg_power * 2; - ch->max_antenna_gain = channel->max_antenna_gain * 2; + ch->max_antenna_gain = channel->max_antenna_gain; ch->reg_class_id = 0; /* FIXME */ /* FIXME: why use only legacy modes, why not any -- 2.20.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k