ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Nuville <paulnuville@yahoo.fr>
To: "ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: "htt version request timed out" with the last 4.1.1.c1 firmware
Date: Sat, 09 Dec 2017 23:23:02 +0100	[thread overview]
Message-ID: <4122842.1D0mIpT2Ae@uapou> (raw)
In-Reply-To: <2025478478.2725588.1512857709726@mail.yahoo.com>

Hello all,

I've installed Archlinux on a Samsung Galaxy Book 10.6", and I'm trying to set 
up the wifi. The only firmware that seems to be suitable is the lastest 4.1.1.c1 
one. But I've some errors and neither ip ad networkmanager are able to set up 
the wlan interface. 
Here are some outputs : 

# lspci -k
01:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network 
Adapter (rev 32)
        Subsystem: Samsung Electronics Co Ltd QCA6174 802.11ac Wireless 
Network Adapter
        Kernel modules: ath10k_pci

# lsmod | grep ath10k
ath10k_pci             53248  0
ath10k_core           356352  1 ath10k_pci
ath                    32768  1 ath10k_core
mac80211              827392  1 ath10k_core
cfg80211              647168  3 mac80211,ath,ath10k_core

# dmesg | grep ath10k
[ 1777.602748] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 
reset_mode 0
[ 1777.861498] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-
cal-pci-0000:01:00.0.bin failed with error -2
[ 1777.861509] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-
pci-0000:01:00.0.bin failed with error -2
[ 1777.861572] ath10k_pci 0000:01:00.0: invalid firmware magic
[ 1777.861587] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/
QCA6174/hw3.0/firmware-5.bin failed with error -2
[ 1777.861815] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 
chip_id 0x00340aff sub 144d:c150
[ 1777.861817] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 
0 testmode 0
[ 1777.862589] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-
QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[ 1777.926402] ath10k_pci 0000:01:00.0: failed to fetch board data for 
bus=pci,vendor=168c,device=003e,subsystem-vendor=144d,subsystem-device=c150 
from ath10k/QCA6174/hw3.0/board-2.bin
[ 1777.926428] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 
ed5f849a
[ 1781.596516] ath10k_pci 0000:01:00.0: htt version request timed out
[ 1781.596523] ath10k_pci 0000:01:00.0: failed to setup htt: -110
[ 1781.669496] ath10k_pci 0000:01:00.0: could not init core (-110)
[ 1781.669544] ath10k_pci 0000:01:00.0: could not probe fw (-110)

Any help will be apreciate ! 

Thank you in advance,

Paul 




_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

       reply	other threads:[~2017-12-09 22:23 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <2025478478.2725588.1512857709726.ref@mail.yahoo.com>
     [not found] ` <2025478478.2725588.1512857709726@mail.yahoo.com>
2017-12-09 22:23   ` Paul Nuville [this message]
2017-12-14 13:14     ` "htt version request timed out" with the last 4.1.1.c1 firmware Kalle Valo
2017-12-14 18:33       ` Adrian Chadd
2017-12-14 21:22         ` Ryan Hsu
2017-12-14 21:55           ` Adrian Chadd
2017-12-19  1:17             ` Adrian Chadd
2017-12-20 18:37               ` lastest firmware 9984 (10.3-3.4.104) Sebastian Gottschall
2017-12-14 21:21       ` "htt version request timed out" with the last 4.1.1.c1 firmware Ryan Hsu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4122842.1D0mIpT2Ae@uapou \
    --to=paulnuville@yahoo.fr \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox