From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.candelatech.com ([208.74.158.172] helo=ns3.lanforge.com) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VqlOO-0007HJ-22 for ath10k@lists.infradead.org; Wed, 11 Dec 2013 15:08:04 +0000 Message-ID: <52A87FBD.4000901@candelatech.com> Date: Wed, 11 Dec 2013 07:07:41 -0800 From: Ben Greear MIME-Version: 1.0 Subject: Question on software-crypt mode. List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: "linux-wireless@vger.kernel.org" , "ath10k@lists.infradead.org" Hello! I am trying to implement software-crypt for ath10k so that it can do crypt with multiple stations connected to same AP. I tried using ath9k's approach and just not setting keys, but that does not work at all (no stations can communicate). If I basically leave code as is, then secondary stations can associate but never get DHCP. I see FCS and hw-crypt errored packets being received from the ath10k firmware/chip. This is probably because the chip/firmware decodes the secondary station's packets with the first station's keys. Transmitted packets (as sniffed from the AP) do appear fine. I was thinking to just take all fcs and/or crypt-errored packets in the receive path and somehow send them up the stack for the software-crypt layer to (re)decrypt. I think I have managed to get ath10k to send them up, but still DHCP does not complete. Does anyone have any suggestions for things to try or code to look at in detail? Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k