From: Ben Greear <greearb@candelatech.com>
To: Vu Hai NGUYEN <vh.nguyen@actiasodielec.fr>
Cc: Janusz Dziedzic <janusz.dziedzic@tieto.com>,
Patrick CARNEIRO RODRIGUEZ <p.carneiro@actiasodielec.fr>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>,
Janusz Dziedzic <janusz.dziedzic@gmail.com>
Subject: Re: RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Date: Wed, 11 Jun 2014 10:05:23 -0700 [thread overview]
Message-ID: <53988C53.6030806@candelatech.com> (raw)
In-Reply-To: <EE97821C81277E459BEA5C6384C6F241012F10997906@srvexch01.SODIELEC.local>
On 06/11/2014 12:19 AM, Vu Hai NGUYEN wrote:
>> Can you explain how you test this? Do I need a special AP configuration
>> to do the test, or is a normal ath10k NIC and hostapd enough?
>>
>> I can try to reproduce the problem and test the fixes here.
>
> In my code, I copy the firmware chosen (10.1, 999 or CT) from another folder to /lib/firmware/ath10k/...
> before loading the modules of ath10k. Then I set up network (bridge or router) and finally run hostapd (if AP)
> and wpa_supplicant (if STA). Each time I change a parameter of my network the program will kill almost
> all the actual processus, unload the modules and then reload, run new processus ....
>
> Btw, I think that there is a conflict in your hostapd config file. I saw that you use channel 52 and
> vht_oper_centr_freq_seg0_idx=54, it means that you use 40 MHz operating Channel width?
> If so vht_oper_chwidth=1 should be set to 0. If you want to use 80Mhz Channel width you should
> set vht_oper_centr_freq_seg0_idx=58.
Can you please try this firmware:
http://www.candelatech.com/downloads/firmware-2-community-scan-X.bin
I have verified that it works fine for me when connecting to an
AP on a DFS channel. It should have the bridging fix as well.
There was an inverted beacon-filter setting bug in my code, though that
also should have been fixed in the previous firmware I sent you.
I might have had some other problem in that older firmware, however.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-06-11 17:05 UTC|newest]
Thread overview: 133+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 16:18 [PATCH v2 2/2] ath10k: support get/set antenna configurations greearb
2014-05-12 15:43 ` RE : " Vu Hai NGUYEN
2014-05-12 16:17 ` Ben Greear
2014-05-13 0:49 ` Avery Pennarun
2014-05-13 3:36 ` Ben Greear
2014-05-13 13:08 ` ath10k: set channel by command "iw" not from hostapd and DFS support of firmware-2.bin_10.1.467.2-1 Vu Hai NGUYEN
2014-05-14 9:32 ` Matti Laakso
2014-05-14 11:56 ` RE : " Vu Hai NGUYEN
2014-05-15 8:02 ` Matti Laakso
2014-05-15 10:41 ` RE : " Vu Hai NGUYEN
2014-05-15 11:11 ` Janusz Dziedzic
2014-05-15 13:36 ` RE : " Vu Hai NGUYEN
2014-05-15 16:08 ` Vu Hai NGUYEN
2014-05-16 6:52 ` Janusz Dziedzic
2014-05-16 7:01 ` RE : " Vu Hai NGUYEN
2014-05-16 7:35 ` Janusz Dziedzic
2014-05-16 7:46 ` Bartosz Markowski
2014-05-16 8:03 ` RE : " Vu Hai NGUYEN
2014-05-16 8:13 ` Bartosz Markowski
2014-05-16 9:41 ` RE : " Vu Hai NGUYEN
2014-05-16 11:39 ` Janusz Dziedzic
2014-05-16 11:50 ` Janusz Dziedzic
2014-05-16 13:17 ` RE : RE " Vu Hai NGUYEN
2014-05-16 17:40 ` Janusz Dziedzic
2014-05-19 9:39 ` Vu Hai NGUYEN
2014-05-19 10:42 ` Janusz Dziedzic
2014-05-16 13:00 ` RE : RE : RE : RE : " Kalle Valo
2014-05-16 14:03 ` Janusz Dziedzic
2014-05-16 14:12 ` Kalle Valo
2014-05-16 7:41 ` Matti Laakso
2014-05-15 7:07 ` ath10k: firmware crash in station mode Vu Hai NGUYEN
2014-05-15 7:53 ` Janusz Dziedzic
2014-05-15 10:57 ` Michal Kazior
2014-05-15 13:27 ` RE : " Vu Hai NGUYEN
2014-05-19 6:59 ` Michal Kazior
2014-05-19 9:47 ` RE : " Vu Hai NGUYEN
2014-05-19 12:51 ` Michal Kazior
2014-05-20 6:44 ` ath10k: firmware crash in station mode & problem DFS Vu Hai NGUYEN
2014-05-20 8:15 ` RE : " Vu Hai NGUYEN
2014-05-20 17:59 ` Janusz Dziedzic
2014-05-21 9:43 ` RE : " Vu Hai NGUYEN
2014-05-21 14:03 ` Janusz Dziedzic
2014-05-22 7:54 ` RE : " Vu Hai NGUYEN
2014-05-22 8:06 ` Vu Hai NGUYEN
2014-05-22 12:18 ` Janusz Dziedzic
2014-05-22 12:25 ` Janusz Dziedzic
2014-05-22 14:40 ` RE : " Vu Hai NGUYEN
2014-05-22 14:45 ` Vu Hai NGUYEN
2014-05-22 16:44 ` RE : " Kalle Valo
[not found] ` <EE97821C81277E459BEA5C6384C6F241012F109978E8@srvexch01.SODIELEC.local>
[not found] ` <EE97821C81277E459BEA5C6384C6F241012F109978E9@srvexch01.SODIELEC.local>
2014-05-23 7:40 ` Kalle Valo
2014-05-23 7:52 ` RE : " Vu Hai NGUYEN
2014-05-26 8:34 ` Janusz Dziedzic
2014-05-26 13:45 ` Vu Hai NGUYEN
[not found] ` <CAFED-j=i5uhjqaJYL+dm_ui48EFeHG3isHYSSSo=+3gk-Wa5YQ@mail.gmail.com>
2014-05-27 6:50 ` Janusz Dziedzic
2014-05-27 9:21 ` Vu Hai NGUYEN
2014-05-27 16:36 ` Vu Hai NGUYEN
2014-05-28 15:25 ` Vu Hai NGUYEN
2014-05-28 15:49 ` Ben Greear
2014-05-30 9:10 ` Vu Hai NGUYEN
2014-05-30 14:49 ` Ben Greear
2014-06-02 16:16 ` Vu Hai NGUYEN
2014-06-02 16:48 ` Ben Greear
2014-06-03 6:51 ` Vu Hai NGUYEN
2014-06-04 4:14 ` Ben Greear
2014-06-04 9:20 ` Vu Hai NGUYEN
2014-06-04 16:20 ` Ben Greear
2014-06-04 21:40 ` Ben Greear
2014-06-05 8:41 ` RE : " Vu Hai NGUYEN
2014-06-05 15:43 ` Ben Greear
2014-06-05 17:33 ` Ben Greear
2014-06-06 9:05 ` RE : " Vu Hai NGUYEN
2014-06-06 15:50 ` Ben Greear
2014-06-10 7:15 ` Vu Hai NGUYEN
2014-06-10 15:51 ` Ben Greear
2014-06-11 7:19 ` Vu Hai NGUYEN
2014-06-11 17:05 ` Ben Greear [this message]
2014-06-12 8:48 ` RE : " Vu Hai NGUYEN
2014-06-12 17:54 ` Ben Greear
2014-06-12 20:22 ` Ben Greear
2014-06-13 8:50 ` Vu Hai NGUYEN
2014-06-13 14:34 ` Ben Greear
2014-06-13 17:04 ` Ben Greear
2014-06-16 7:16 ` Vu Hai NGUYEN
2014-06-16 14:47 ` Ben Greear
2014-06-17 7:25 ` Vu Hai NGUYEN
2014-06-23 9:03 ` Warning message in bridge mode Vu Hai NGUYEN
2014-06-23 21:33 ` Ben Greear
2014-06-23 21:47 ` Bruno Antunes
2014-06-24 7:39 ` RE : " Vu Hai NGUYEN
2014-06-24 15:10 ` Ben Greear
2014-06-26 14:17 ` Vu Hai NGUYEN
2014-06-26 14:34 ` Ben Greear
2014-06-27 15:52 ` Vu Hai NGUYEN
2014-06-27 15:59 ` Ben Greear
2014-06-30 8:14 ` Vu Hai NGUYEN
2014-06-07 0:28 ` RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS Ben Greear
2014-05-28 17:19 ` Janusz Dziedzic
2014-05-28 18:40 ` Janusz Dziedzic
2014-05-30 11:55 ` Vu Hai NGUYEN
2014-06-02 7:03 ` Janusz Dziedzic
2014-05-23 7:18 ` Michal Kazior
2014-05-23 9:15 ` RE : RE : ath10k: firmware crash in station mode Yeoh Chun-Yeow
2014-05-23 11:35 ` RE : " Vu Hai NGUYEN
2014-05-23 14:27 ` Yeoh Chun-Yeow
2014-05-23 14:55 ` TR " Vu Hai NGUYEN
2014-05-23 15:36 ` Yeoh Chun-Yeow
2014-05-23 16:03 ` Ben Greear
2014-05-24 6:29 ` Tim Harvey
2014-05-24 16:14 ` Ben Greear
2014-05-27 19:13 ` Ben Greear
2014-05-25 7:26 ` Kalle Valo
2014-05-24 5:49 ` Tim Harvey
2014-05-24 16:46 ` Yeoh Chun-Yeow
2014-05-13 0:52 ` [PATCH] ath10k: support get/set antenna configurations Avery Pennarun
2014-05-13 18:10 ` Kalle Valo
2014-05-13 18:15 ` Ben Greear
2014-05-13 21:03 ` Avery Pennarun
2014-05-14 12:28 ` Kalle Valo
2014-05-15 4:04 ` Yeoh Chun-Yeow
2014-05-15 5:47 ` Avery Pennarun
2014-05-15 6:51 ` Yeoh Chun-Yeow
2014-05-15 7:11 ` Kalle Valo
2014-05-13 21:11 ` [PATCH v3] " Avery Pennarun
2014-05-14 6:20 ` Yeoh Chun-Yeow
2014-05-14 6:21 ` Avery Pennarun
2014-05-14 6:25 ` Yeoh Chun-Yeow
2014-05-14 7:18 ` Avery Pennarun
2014-05-14 7:22 ` Yeoh Chun-Yeow
2014-05-14 7:33 ` Yeoh Chun-Yeow
2014-05-16 12:30 ` Kalle Valo
2014-05-16 13:00 ` Ben Greear
2014-05-22 16:56 ` Kalle Valo
2014-05-13 17:50 ` RE : [PATCH v2 2/2] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53988C53.6030806@candelatech.com \
--to=greearb@candelatech.com \
--cc=ath10k@lists.infradead.org \
--cc=janusz.dziedzic@gmail.com \
--cc=janusz.dziedzic@tieto.com \
--cc=p.carneiro@actiasodielec.fr \
--cc=vh.nguyen@actiasodielec.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox