Re: QCA6174 bringup

Re: QCA6174 bringup

[Michael Krupp]

[-- Attachment #1.1: Type: text/plain, Size: 1072 bytes --]

Hello Ganesh,


I downloaded the official Windows 10 driver from acer.com and extracted the
setup file using InstallShield [1] Cab Viewer [2]. The 30-day trial version
is sufficient to do this.

Inside the "main" setup file, there was another setup.exe for the atheros
driver itself. I extracted it using UniExtract [3].

The inner setup file contained a couple of eeprom_* files inside the "drivers"
directory. I then copied the one matching my device to "board.bin".

In my case: /lib/firmware/ath10k/QCA6174/hw3.0/board.bin


Michael

[1] http://learn.flexerasoftware.com/IS-EVAL-InstallShield-Professional-DE
[2] http://helpnet.installshield.com/installshield22helplib/helplibrary/IsCabView.htm
[3] http://legroom.net/software/uniextract

On 10/27/2015 07:07 AM, Ganesh GR wrote:
> Hi Michael,
> 
> I am very excited to know how did you you extract board binary from windows driver, do you have windows driver source ?.
> 
> Regards
> Ganesh
> 
> Sent using CloudMagic <https://cloudmagic.com/k/d/mailapp?ct=pi&cv=6.0.64&pv=7.1.2>
> 


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k