From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from sabertooth02.qualcomm.com ([65.197.215.38]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WD8NU-0001wA-ER for ath10k@lists.infradead.org; Tue, 11 Feb 2014 08:07:37 +0000 From: Kalle Valo Subject: Re: [PATCH] ath10k: AP: handle HT station which does not have HT RX MCS References: <1392034375-13532-1-git-send-email-bartosz.markowski@tieto.com> Date: Tue, 11 Feb 2014 10:06:58 +0200 In-Reply-To: <1392034375-13532-1-git-send-email-bartosz.markowski@tieto.com> (Bartosz Markowski's message of "Mon, 10 Feb 2014 13:12:55 +0100") Message-ID: <8761omdqe5.fsf@kamboji.qca.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Bartosz Markowski Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org Bartosz Markowski writes: > This is a workaround for HT-enabled STAs which break the spec > and have no HT capabilities RX mask (no HT RX MCS map). > > As per spec, in section 20.3.5 Modulation and coding scheme (MCS), > MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs. > > Firmware asserts if such situation occurs. > > Signed-off-by: Bartosz Markowski This conflicted with Marek K's patch "ath10k: Set proper nss value for the peer". Please check that my resolution in ath-next-test is correct: https://github.com/kvalo/ath/commit/d56aa0e779c17f8048a70a9dbd5228b54d9a712e -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k