* ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs
@ 2022-03-25 10:03 =?gb18030?B?1cXF9A==?=
2022-04-13 9:07 ` Kalle Valo
0 siblings, 1 reply; 8+ messages in thread
From: =?gb18030?B?1cXF9A==?= @ 2022-03-25 10:03 UTC (permalink / raw)
To: =?gb18030?B?YXRoMTBr?=
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb18030", Size: 1391 bytes --]
Hi,
Modified the radio frequency hardware part of e2600ac c1,
need to cooperate with the modified board.bin file, the device
can work normally.
For the questions from the wiki page:
* description for what hardware this is:
- it is a IPQ4019 based board (AP-DK04)
- one QCA40xx radio is used as 2.4 GHz radio
- one QCA40xx radio is used as 5 GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- The board file(s) where extracted from the Qxwlan firmware.
- The files in this email are:
* board_wifi0_2g.bin
* board_wifi1_5g.bin
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Qxwlan-E2600AC-C1bin
sha256sum:
a3b3687c1d80dc92b5d78b1aa205f1463bd11f4efc29f7311bdaabc28c1d3eb2
+bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Qxwlan-E2600AC-C1bin
sha256sum:
44f3f2e8d9ff9396d3ab73db3dfeb864cef20d7e43032a133fa8a7c74e5d7ad4
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
ÕÅÅô
[-- Attachment #2: board_wifi0_2g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: board_wifi1_5g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 8+ messages in thread
* ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs
@ 2022-03-25 10:06 =?gb18030?B?1cXF9A==?=
0 siblings, 0 replies; 8+ messages in thread
From: =?gb18030?B?1cXF9A==?= @ 2022-03-25 10:06 UTC (permalink / raw)
To: =?gb18030?B?YXRoMTBr?=
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb18030", Size: 1356 bytes --]
Hi,
Modified the radio frequency hardware part of e2600ac c1,
need to cooperate with the modified board.bin file, the device
can work normally.
For the questions from the wiki page:
* description for what hardware this is:
- it is a IPQ4019 based board (AP-DK04)
- one QCA40xx radio is used as 2.4 GHz radio
- one QCA40xx radio is used as 5 GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- The board file(s) where extracted from the Qxwlan firmware.
- The files in this email are:
* board_wifi0_2g.bin
* board_wifi1_5g.bin
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Qxwlan-E2600AC-C1bin
sha256sum:
a3b3687c1d80dc92b5d78b1aa205f1463bd11f4efc29f7311bdaabc28c1d3eb2
+bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Qxwlan-E2600AC-C1bin
sha256sum:
44f3f2e8d9ff9396d3ab73db3dfeb864cef20d7e43032a133fa8a7c74e5d7ad4
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
ÕÅÅô
[-- Attachment #2: board_wifi0_2g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: board_wifi1_5g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 8+ messages in thread
* ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs
@ 2022-03-25 10:09 =?gb18030?B?1cXF9A==?=
2022-03-25 10:14 ` Kalle Valo
0 siblings, 1 reply; 8+ messages in thread
From: =?gb18030?B?1cXF9A==?= @ 2022-03-25 10:09 UTC (permalink / raw)
To: =?gb18030?B?YXRoMTBr?=
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb18030", Size: 1135 bytes --]
Hi,
Modified the radio frequency hardware part of e2600ac c1,
need to cooperate with the modified board.bin file, the device
can work normally.
For the questions from the wiki page:
* description for what hardware this is:
- it is a IPQ4019 based board (AP-DK04)
- one QCA40xx radio is used as 2.4 GHz radio
- one QCA40xx radio is used as 5 GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- The board file(s) where extracted from the Qxwlan firmware.
- The files in this email are:
* board_wifi0_2g.bin
* board_wifi1_5g.bin
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Qxwlan-E2600AC-C1bin
sha256sum:
a3b3687c1d80dc92b5d78b1aa205f1463bd11f4efc29f7311bdaabc28c1d3eb2
+bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Qxwlan-E2600AC-C1bin
sha256sum:
44f3f2e8d9ff9396d3ab73db3dfeb864cef20d7e43032a133fa8a7c74e5d7ad4
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
ÕÅÅô
[-- Attachment #2: board_wifi0_2g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: board_wifi1_5g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 8+ messages in thread
* ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs
@ 2022-03-25 10:10 =?gb18030?B?1cXF9A==?=
0 siblings, 0 replies; 8+ messages in thread
From: =?gb18030?B?1cXF9A==?= @ 2022-03-25 10:10 UTC (permalink / raw)
To: =?gb18030?B?YXRoMTBr?=
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb18030", Size: 1124 bytes --]
Hi,
Modified the radio frequency hardware part of e2600ac c1,
need to cooperate with the modified board.bin file, the device
can work normally.
For the questions from the wiki page:
* description for what hardware this is:
- it is a IPQ4019 based board (AP-DK04)
- one QCA40xx radio is used as 2.4 GHz radio
- one QCA40xx radio is used as 5 GHz radio
* origin of the board file (did you create it yourself or where you downloaded)
- The board file(s) where extracted from the Qxwlan firmware.
- The files in this email are:
* board_wifi0_2g.bin
* board_wifi1_5g.bin
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Qxwlan-E2600AC-C1bin
sha256sum:
a3b3687c1d80dc92b5d78b1aa205f1463bd11f4efc29f7311bdaabc28c1d3eb2
+bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Qxwlan-E2600AC-C1bin
sha256sum:
44f3f2e8d9ff9396d3ab73db3dfeb864cef20d7e43032a133fa8a7c74e5d7ad4
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin (minus the ".bin")
Kind regards,
ÕÅÅô
[-- Attachment #2: board_wifi0_2g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: board_wifi1_5g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 8+ messages in thread
* ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs
@ 2022-03-25 10:11 =?gb18030?B?1cXF9A==?=
0 siblings, 0 replies; 8+ messages in thread
From: =?gb18030?B?1cXF9A==?= @ 2022-03-25 10:11 UTC (permalink / raw)
To: =?gb18030?B?YXRoMTBr?=
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb18030", Size: 1117 bytes --]
Hi,
Modified the radio frequency hardware part of e2600ac c1,
need to cooperate with the modified board.bin file, the device
can work normally.
For the questions from the wiki page:
* description for what hardware this is:
- it is a IPQ4019 based board (AP-DK04)
- one QCA40xx radio is used as 2.4 GHz radio
- one QCA40xx radio is used as 5 GHz radio
* origin of the board file (did you create it yourself or where you downloaded)
- The board file(s) where extracted from the Qxwlan firmware.
- The files in this email are:
* board_wifi0_2g.bin
* board_wifi1_5g.bin
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Qxwlan-E2600AC-C1bin
sha256sum:
a3b3687c1d80dc92b5d78b1aa205f1463bd11f4efc29f7311bdaabc28c1d3eb2
+bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Qxwlan-E2600AC-C1bin
sha256sum:
44f3f2e8d9ff9396d3ab73db3dfeb864cef20d7e43032a133fa8a7c74e5d7ad4
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin (minus the ".bin")
Kind regards,
ÕÅÅô
[-- Attachment #2: board_wifi0_2g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: board_wifi1_5g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 8+ messages in thread
* ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs
@ 2022-03-25 10:11 =?gb18030?B?1cXF9A==?=
0 siblings, 0 replies; 8+ messages in thread
From: =?gb18030?B?1cXF9A==?= @ 2022-03-25 10:11 UTC (permalink / raw)
To: =?gb18030?B?YXRoMTBr?=
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb18030", Size: 1111 bytes --]
Hi,
Modified the radio frequency hardware part of e2600ac c1,
need to cooperate with the modified board.bin file, the device
can work normally.
For the questions from the wiki page:
* description for what hardware this is:
- it is a IPQ4019 based board (AP-DK04)
- one QCA40xx radio is used as 2.4 GHz radio
- one QCA40xx radio is used as 5 GHz radio
* origin of the board file (did you create it yourself or where you downloaded)
- The board file(s) where extracted from the Qxwlan firmware.
- The files in this email are:
* board_wifi0_2g.bin
* board_wifi1_5g.bin
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Qxwlan-E2600AC-C1bin
sha256sum:
a3b3687c1d80dc92b5d78b1aa205f1463bd11f4efc29f7311bdaabc28c1d3eb2
+bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Qxwlan-E2600AC-C1bin
sha256sum:
44f3f2e8d9ff9396d3ab73db3dfeb864cef20d7e43032a133fa8a7c74e5d7ad4
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin (minus the ".bin")
Kind regards,
ÕÅÅô
[-- Attachment #2: board_wifi0_2g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: board_wifi1_5g.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs
2022-03-25 10:09 ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs =?gb18030?B?1cXF9A==?=
@ 2022-03-25 10:14 ` Kalle Valo
0 siblings, 0 replies; 8+ messages in thread
From: Kalle Valo @ 2022-03-25 10:14 UTC (permalink / raw)
To: 张鹏; +Cc: ath10k
"张鹏" <1805692831@qq.com> writes:
> Modified the radio frequency hardware part of e2600ac c1,
> need to cooperate with the modified board.bin file, the device
> can work normally.
Why are you sending the same mail multiple times? I have seen at least
three copies now.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs
2022-03-25 10:03 =?gb18030?B?1cXF9A==?=
@ 2022-04-13 9:07 ` Kalle Valo
0 siblings, 0 replies; 8+ messages in thread
From: Kalle Valo @ 2022-04-13 9:07 UTC (permalink / raw)
To: 张鹏; +Cc: ath10k
"张鹏" <1805692831@qq.com> writes:
> Hi,
> Modified the radio frequency hardware part of e2600ac c1,
> need to cooperate with the modified board.bin file, the device
> can work normally.
>
>
>
> For the questions from the wiki page:
>
> * description for what hardware this is:
>
> - it is a IPQ4019 based board (AP-DK04)
> - one QCA40xx radio is used as 2.4 GHz radio
> - one QCA40xx radio is used as 5 GHz radio
>
> * origin of the board file (did you create it yourself or where you
> downloaded)
>
> - The board file(s) where extracted from the Qxwlan firmware.
> - The files in this email are:
> * board_wifi0_2g.bin
> * board_wifi1_5g.bin
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
> - QCA4019 hw1.0
>
> + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Qxwlan-E2600AC-C1bin
> sha256sum:
>
> a3b3687c1d80dc92b5d78b1aa205f1463bd11f4efc29f7311bdaabc28c1d3eb2
> +bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Qxwlan-E2600AC-C1bin
> sha256sum:
>
> 44f3f2e8d9ff9396d3ab73db3dfeb864cef20d7e43032a133fa8a7c74e5d7ad4
>
>
> * attach the actual board file (board.bin)
>
> - The name of the files are equal to the id string in the board-2.bin
> (minus the ".bin")
The filenames are not in correct format so my script fails:
[2. application/octet-stream; board_wifi0_2g.bin]...
[3. application/octet-stream; board_wifi1_5g.bin]...
Please read the documentation:
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-04-13 9:08 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-03-25 10:09 ath10k-firmware: QCA4019 hw1.0: Update Qxwlan E2600AC c1 specific BDFs =?gb18030?B?1cXF9A==?=
2022-03-25 10:14 ` Kalle Valo
-- strict thread matches above, loose matches on Subject: below --
2022-03-25 10:11 =?gb18030?B?1cXF9A==?=
2022-03-25 10:11 =?gb18030?B?1cXF9A==?=
2022-03-25 10:10 =?gb18030?B?1cXF9A==?=
2022-03-25 10:06 =?gb18030?B?1cXF9A==?=
2022-03-25 10:03 =?gb18030?B?1cXF9A==?=
2022-04-13 9:07 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).