Re: ath10k-firmware: QCA4019 hw1.0: Add Plasma Cloud PA1200 specific BDFs

[Kalle Valo <kvalo@kernel.org>]

Sven Eckelmann <sven@narfation.org> writes:

> The support for this device is currently prepared for OpenWrt. This AP requires 
> two special BDFs to get the Wi-Fi PHYs working (correctly).
>
> Now to the questions from the wiki page [1]:
>
> * description for what hardware this is:
>
>   - it is a IPQ4019 based board
>   - one QCA40xx radio is used as 2.4GHz radio
>   - one QCA40xx radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you
>   downloaded)
>
>   - was provided by vendor in patch send to me for the OpenWrt support
>     (Sun, 27 Jan 2019 22:23:37 +0800)
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
>   - BoardNames[0]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200'
>     BoardLength[0]: 12064
>     BoardCRC32[0]: 4993061f
>     BoardMD5[0]: f8727ab647005b96d83a0ab62fddb3e1
>   - BoardNames[1]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200'
>     BoardLength[1]: 12064
>     BoardCRC32[1]: d88f99d8
>     BoardMD5[1]: be3e4787cc41754c54a8aa5e76576855
>
> * attach the actual board file (board.bin)
>
>   - The name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 84 in total

https://github.com/kvalo/ath10k-firmware/commit/ff8c56bb347ae1e8ac063a7b5dedf59178abcd1d

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k