Re: ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMD1 specific BDFs

[Kalle Valo <kvalo@kernel.org>]

<frank.shen@senao.com> writes:

> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the the IPQ401X AP-DK
> boards because QCA doesn't provide special IDs for customers and seems
> to use the AP-DK board-ids in the wifi firmware to change its
> behavior.
>
> Now to the questions from the wiki page [1]:
>
> l       description for what hardware this is:
> -       it is a IPQ4018 based board
> -       one QCA40xx radio is used as 2.4GHz radio
> -       one QCA40xx radio is used as 5GHz radio
>
> l       origin of the board file (did you create it yourself or where you downloaded)
> -       taken from stock firmware image
>
> l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> -        QCA4019 hw1.0
>
> md5sum of each new board file to add
> + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMD1'
> md5sum: da14e0efd0b408685a0e5aa83227d460
> + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMD1'
> md5sum: 685aa42c29ac39248ca75b748d8f9e18

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMD1
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMD1

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 58 in total

https://github.com/kvalo/ath10k-firmware/commit/0d2493ac59f3d3373bbcb24a35fe1944a15b6ad6

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k