From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from sabertooth01.qualcomm.com ([65.197.215.72]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZcWtW-00087X-HT for ath10k@lists.infradead.org; Thu, 17 Sep 2015 10:58:27 +0000 From: Kalle Valo Subject: Re: [PATCH v3 1/3] ath10k: enable monitor when OTHER_BSS requested References: <1441817256-3997-1-git-send-email-me@bobcopeland.com> Date: Thu, 17 Sep 2015 13:57:51 +0300 In-Reply-To: <1441817256-3997-1-git-send-email-me@bobcopeland.com> (Bob Copeland's message of "Wed, 9 Sep 2015 12:47:34 -0400") Message-ID: <87d1xhuxcg.fsf@kamboji.qca.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Bob Copeland Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org Bob Copeland writes: > By default, ath10k restricts received frames to those matching BSSID. > When other BSS frames are requested (e.g. in mesh mode), add an internal > monitor device so those frames are not filtered. > > Signed-off-by: Bob Copeland Thanks, all three patches applied. In patch 3 I just changed the firmware version in commit log to 10.2.4.70.6-2 as that one has the raw mode feature flag enabled. I also tested this myself and I was able to join to a mesh network I created with ath9k and ping each other. In case someone cherry picks these patches please take into account that these patches need quite a few recent mac80211 patches from mac80211-next. The patches are also in wireless-testing and ath.git master branch. Safest is to test with ath.git master branch. -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k