From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail27.static.mailgun.info ([104.130.122.27]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jC4ab-0004HU-PG for ath10k@lists.infradead.org; Wed, 11 Mar 2020 16:52:16 +0000 From: Kalle Valo Subject: Re: [PATCH RFT] ath10k: add QCA9377 sdio hw_param item References: <1569507867-19547-1-git-send-email-kvalo@codeaurora.org> <7BB79E29-0ACF-45FB-B802-E4B2F5CA0DFE@gmail.com> <03d244cd-3205-6c95-c43e-99bc0135b50a@gmail.com> Date: Wed, 11 Mar 2020 18:52:05 +0200 In-Reply-To: <03d244cd-3205-6c95-c43e-99bc0135b50a@gmail.com> (Erik Stromdahl's message of "Wed, 4 Mar 2020 18:51:57 +0100") Message-ID: <87imjaomve.fsf@kamboji.qca.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Erik Stromdahl Cc: linux-wireless@vger.kernel.org, Christian Hewitt , ath10k@lists.infradead.org Erik Stromdahl writes: > On 3/2/20 12:45 PM, Christian Hewitt wrote: >> >>> On 26 Sep 2019, at 6:24 pm, Kalle Valo wrote: >>> >>> From: Erik Stromdahl >>> >>> Add hardware parameters for QCA9377 sdio devices, it's now properly supported. >>> >>> Signed-off-by: Erik Stromdahl >>> Signed-off-by: Kalle Valo [...] >> Tested and working fine using Linux 5.6-rc3 and SDIO firmware from [1]. >> >> [ 5.391369] ath10k_sdio mmc2:0001:1: qca9377 hw1.1 sdio target >> 0x05020001 chip_id 0x00000000 sub 0000:0000 >> [ 5.391379] ath10k_sdio mmc2:0001:1: kconfig debug 0 debugfs 0 >> tracing 0 dfs 0 testmode 0 >> [ 5.391632] ath10k_sdio mmc2:0001:1: firmware ver >> WLAN.TF.1.1.1-00061-QCATFSWPZ-1 api 5 features ignore-otp crc32 >> 7746e551 >> [ 5.624198] ath10k_sdio mmc2:0001:1: failed to fetch board data for >> bus=sdio,vendor=0271,device=0701,subsystem-vendor=0000,subsystem-device=0000 >> from ath10k/QCA9377/hw1.0/board-2.bin >> [ 5.624473] ath10k_sdio mmc2:0001:1: board_file api 1 bmi_id N/A crc32 544289f7 >> [ 6.775882] ath10k_sdio mmc2:0001:1: htt-ver 3.32 wmi-op 4 htt-op 3 >> cal otp max-sta 32 raw 0 hwcrypto 1 >> [ 6.854066] ath: EEPROM regdomain sanitized >> [ 6.854073] ath: EEPROM regdomain: 0x64 >> [ 6.854075] ath: EEPROM indicates we should expect a direct regpair map >> [ 6.854082] ath: Country alpha2 being used: 00 >> [ 6.854083] ath: Regpair used: 0x64 >> [ 8.444189] ath: EEPROM regdomain: 0x8114 >> [ 8.444194] ath: EEPROM indicates we should expect a country code >> [ 8.444196] ath: doing EEPROM country->regdmn map search >> [ 8.444198] ath: country maps to regdmn code: 0x37 >> [ 8.444201] ath: Country alpha2 being used: DE >> [ 8.444203] ath: Regpair used: 0x37 >> [ 8.444206] ath: regdomain 0x8114 dynamically updated by country element >> >> The test device is an Amlogic S905D STB device from O2.cz that I >> have just submitted a working device-tree for [2]. >> >> If you need a QCA9377 test device, I have a duplicate/spare of the >> box and would be happy to post it. >> >> Tested-by: Christian Hewitt >> >> [1] https://github.com/chewitt/qca-firmware >> [2] https://patchwork.kernel.org/project/linux-amlogic/list/?series=249525 >> > > I have received a lot of questions lately about this patch (why it has > not been integrated). > It is actually the only missing piece in order to have working QCA9377 > support on mainline. > > Unless there is a good reason not to add it, I think it should be integrated. Thanks for testing, I applied it now. -- https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k