From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]) by merlin.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gNb9g-0007Cl-NX for ath10k@lists.infradead.org; Fri, 16 Nov 2018 10:15:17 +0000 From: Kalle Valo Subject: Re: [PATCH REGRESSION] Revert "ath10k: add quiet mode support for QCA6174/QCA9377" References: <20181107185643.240346-1-briannorris@chromium.org> <7f2ef494f4a2aba1845a157da8fec449@codeaurora.org> Date: Fri, 16 Nov 2018 12:14:59 +0200 In-Reply-To: (Brian Norris's message of "Thu, 8 Nov 2018 09:30:43 -0800") Message-ID: <87k1ld72ho.fsf@codeaurora.org> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Brian Norris Cc: yyuwang@codeaurora.org, rmanohar@codeaurora.org, linux-wireless-owner@vger.kernel.org, linux-wireless@vger.kernel.org, Linux Kernel , ath10k@lists.infradead.org, govinds@codeaurora.org, pillair@codeaurora.org, stable Brian Norris writes: > On Wed, Nov 7, 2018 at 8:32 PM Govind Singh wrote: >> On 2018-11-08 03:00, Rajkumar Manoharan wrote: >> > On 2018-11-07 10:56, Brian Norris wrote: >> >> This reverts commit cfb353c0dc058bc1619cc226d3cbbda1f360bdd3. >> >> >> >> WCN3990 firmware does not yet implement this feature, and so it >> >> crashes >> >> like this: >> >> >> >> fatal error received: err_qdi.c:456:EX:wlan_process:1:WLAN >> >> RT:207a:PC=b001b4f0 >> >> >> >> This feature can be re-implemented with a proper service bitmap or >> >> other >> >> feature-discovery mechanism in the future. But it should not break >> >> working boards. >> >> >> > Brian, >> > >> > The change "ath10k: add quiet mode support for QCA6174/QCA9377" was >> > merged even >> > before full WCN3990 device support was added in ath10k. How come it >> > could be regression >> > for WCN3990. I know both are sharing same WMI-TLV interface but >> > reverting this >> > will break QCA6174/QCA9377. no? > > I don't see how the revert would "break" QCA6174 -- QCA6174 worked > just fine without this feature and should continue to do so. > >> This regression is found while we switched from 4.18 + WCN3990 >> back-ports to 4.19. > > ^^ What Govind said. WCN3990 support has been trickling in over a few > releases, and it doesn't seem kosher to allow people to submit > regressions in the midst of that. Yeah, I agree. >> > I would prefer to handle this within WMI callback or upper layer. >> > >> >> IMO, we should use (WMI_SERVICE_THERMAL_MGMT | WMI_SERVICE_THERM_THROT ) >> service bitmap check and call >> ath10k_thermal_set_throttling only if fw supports THERMAL THROTTLE >> feature. But we need to ensure all >> available ath10k fw's are reporting this service. > > And the above notes from Govind highlight this -- if the feature was > not protected by the appropriate service flags, then we can't be sure > that you didn't break a bunch of other firmware releases out there. > Linux should not break for everyone just because you spun a firmware > release. > > Of course, I'll leave it up to Kalle as to how he wants to mediate > this. And if you come up with a solid patch soon that can fix this > without dropping the feature, then so be it. We should have a fix for this available next week which I'm planning to push to 4.20. If that does not happen my plan B is to apply Brian's revert to make wcn3990 working on 4.20. Thanks Brian for investigating this and providing the revert! -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k