Re: ath10k-firmware: QCA4019 hw1.0: Update OpenMesh A62 specific BDFs

From: Kalle Valo <kvalo@kernel.org>
To: Sven Eckelmann <sven@narfation.org>
Cc: ath10k@lists.infradead.org
Subject: Re: ath10k-firmware: QCA4019 hw1.0: Update OpenMesh A62 specific BDFs
Date: Fri, 21 Jan 2022 15:12:46 +0200	[thread overview]
Message-ID: <87y239fd0x.fsf@kernel.org> (raw)
In-Reply-To: <2312547.eMb23psXx6@bentobox> (Sven Eckelmann's message of "Mon,  01 Jul 2019 11:42:59 +0200")

Sven Eckelmann <sven@narfation.org> writes:

> [resent of mail from 2019-06-11; seems like @datto.com mail server ate the
>  outgoing mails]
>
> Hi,
>
> The OpenMesh A62 AP requires three special BDFs to get the Wi-Fi PHYs working 
> (correctly). The  bmi-board-id='s would clash with one of the the IPQ401X 
> AP-DK boards because QCA doesn't provide special IDs for customers and seems 
> to use the AP-DK board-ids in the wifi firmware to change its behavior. This 
> request contains the two files for QCA4019. The QCA9888 one will be submitted 
> in a different request.
>
> This update contains:
>
> * add of the antenna gain
> * adjustments of the antenna sensitivity (see minCCA power threshold and
>   configAddr)
> * CTLs for DFS channels
>
> It supersedes https://lkml.kernel.org/r/2795259.fejyDvFH3e@bentobox
>
>
> Now to the questions from the wiki page [1]:
>
> * description for what hardware this is:
>
>   - it is a QCA4018 based module (based on qcom-ipq4019-ap.dk04.1)
>   - one QCA4018 radio is used as 2.4GHz radio
>   - one QCA4018 radio is used as 5GHz radio
>   - an additional QCA9888 5GHz radio is attached via PCI
>
> * origin of the board file (did you create it yourself or where you
>   downloaded)
>
>   - it was created by the ODM and QCA for the OpenMesh A62
>   - was provided by the ODM to OpenMesh for this product (this includes
>     distribution)
>   - it is the latest release from 2018-11-28 (with fix to have
>     antennagain at correct position)
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
>   - QCA4019 hw1.0
>
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
>       md5sum: 7642733bfd0c53927209a25440a484e3
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
>       md5sum: ef250f4c8ac057e9995b08e28c482423
>
> * attach the actual board file (board.bin)
>
>   - The name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:

Changed:
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62

Deleted:

0 board image(s) added, 2 changed, 0 deleted, 50 in total

https://github.com/kvalo/ath10k-firmware/commit/f305604442001fd45f357fed38a6c4a59868f4ee

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k