messages from 2019-02-19 10:01:21 to 2019-03-26 03:46:45 UTC [more...]
Warning at drivers/net/wireless/ath/ath10k/mac.c:5625 ath10k_bss_info_changed
2019-03-26 3:46 UTC (7+ messages)
[PATCH] ath10k: pci: use mutex for diagnostic window CE polling
2019-03-25 22:14 UTC (4+ messages)
[PATCH v2 0/2] Add xo calibration support for wifi rf clock
2019-03-25 17:16 UTC (6+ messages)
` [PATCH v2 1/2] dt: bindings: add dt entry for XO calibration support
` [PATCH v2 2/2] ath10k: Add xo calibration support for wifi rf clock
QCA6174A Bluetooth HSP could not work
2019-03-25 12:31 UTC
Ath10k on XPS 9380 regularly disconnects
2019-03-22 15:43 UTC (2+ messages)
ath10k_pci : failed to wake target for write32
2019-03-22 14:36 UTC
[ath6kl:ath11k-bringup 47/60] drivers/net/wireless/ath/ath11k/hal_rx.c:1156:27: sparse: cast to restricted __le32
2019-03-22 0:46 UTC
[ath6kl:ath11k-bringup 46/60] drivers/net/wireless/ath/ath11k/dp_rx.c:2016:16: sparse: symbol 'ath11k_dp_rx_alloc_mon_status_buf' was not declared. Should it be static?
2019-03-22 0:05 UTC (2+ messages)
` [RFC PATCH ath6kl] ath11k: ath11k_dp_rx_alloc_mon_status_buf can be static
[ath6kl:ath11k-bringup 30/60] drivers/net/wireless/ath/ath11k/wmi.c:5612:6: sparse: symbol 'ath11k_pdev_ctl_failsafe_check_event' was not declared. Should it be static?
2019-03-21 18:59 UTC (2+ messages)
` [RFC PATCH ath6kl] ath11k: ath11k_pdev_ctl_failsafe_check_event() can be static
[ath6kl:ath11k-bringup 3/60] drivers/net/wireless/ath/ath11k/debug_htt_stats.c:4696:12: warning: assignment makes pointer from integer without a cast
2019-03-21 13:10 UTC
[PATCH v2] fq: fix fq_tin tx bytes overflow
2019-03-18 4:59 UTC (3+ messages)
[PATCH] net: ath: fix missing checks for bmi reads and writes
2019-03-15 5:24 UTC (2+ messages)
[ath6kl:ath11k-bringup 25/51] drivers/net//wireless/ath/ath11k/debug.c:358:8: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'?
2019-03-13 3:26 UTC
[ath6kl:ath11k-bringup 47/51] drivers/net/wireless/ath/ath11k/hal_rx.c:1156:27: sparse: warning: cast to restricted __le32
2019-03-13 1:28 UTC
[ath6kl:ath11k-bringup 3/51] drivers/net//wireless/ath/ath11k/debug_htt_stats.c:4696:14: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'?
2019-03-12 16:55 UTC
[ath6kl:ath11k-bringup 47/51] drivers/net//wireless/ath/ath11k/hal_rx.c:938:45: warning: bitwise comparison always evaluates to false
2019-03-12 15:19 UTC
[PATCH] ath10k: rx_duration update for fw_stats debugfs entry
2019-03-12 11:17 UTC
[PATCH] ath10k: Fix the tx stats bytes & packets parsing
2019-03-12 4:33 UTC
[PATCH] ath10k: fix return value check in wake_tx_q op
2019-03-12 2:23 UTC (7+ messages)
` FW: "
[PATCH 0/2] Fix tx stats inconsistencies
2019-03-11 23:01 UTC (5+ messages)
` [PATCH 1/2] ath10k: Fix rate table updation in tx stats
` [PATCH 2/2] ath10k: Fix NSS tx stats for legacy rates
ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs
2019-03-11 18:41 UTC
[PATCH] ath10k: avoid leaving .bss_info_changed prematurely
2019-03-11 8:31 UTC
[ath6kl:ath11k-bringup 3/44] drivers/net/wireless/ath/ath11k/mac.c:2186 ath11k_set_key() warn: impossible condition '(arvif->def_wep_key_index == -1) => (0-255 == (-1))'
2019-03-11 7:11 UTC
[PATCHv3 0/9] cfg80211/mac80211: Add support for TID specific configuration
2019-03-11 7:02 UTC (13+ messages)
` [PATCHv3 1/9] nl80211: New netlink command "
` [PATCHv3 2/9] nl80211: Add new netlink attribute for TID speicific retry count
` [PATCHv3 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable
` [PATCHv3 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS
` [PATCHv3 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
` [PATCHv3 6/9] mac80211: Add api to support configuring TID specific configuration
` [PATCHv3 7/9] ath10k: Add wmi command support for station specific TID config
` [PATCHv3 8/9] ath10k: Add new api to support TID specific configuration
` [PATCHv3 9/9] ath10k: Add extended TID configuration support
[PATCHv4 0/9] cfg80211/mac80211: Add support for TID specific configuration
2019-03-11 6:48 UTC (10+ messages)
` [PATCHv4 1/9] nl80211: New netlink command "
` [PATCHv4 2/9] nl80211: Add new netlink attribute for TID speicific retry count
` [PATCHv4 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable
` [PATCHv4 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS
` [PATCHv4 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
` [PATCHv4 6/9] mac80211: Add api to support configuring TID specific configuration
` [PATCHv4 7/9] ath10k: Add wmi command support for station specific TID config
` [PATCHv4 8/9] ath10k: Add new api to support TID specific configuration
` [PATCHv4 9/9] ath10k: Add extended TID configuration support
[PATCH] ath10k: fill the channel survey results for WCN3990 correctly
2019-03-11 0:12 UTC (3+ messages)
ath10k-firmware: QCA4019 hw1.0: Add AVM FRITZ!Repeater 3000 specific BDFs
2019-03-08 23:26 UTC
[PATCH] ath11k: fix noderef.cocci warnings
2019-03-08 12:51 UTC (3+ messages)
[PATCH] ath11k: fix bugon.cocci warnings
2019-03-08 12:49 UTC (2+ messages)
[PATCH] ath11k: fix itnull.cocci warnings
2019-03-08 12:48 UTC (2+ messages)
[PATCH] ath11k: fix semicolon.cocci warnings
2019-03-08 12:46 UTC (2+ messages)
[PATCH] ath10k: Fix channel info parsing for non tlv target
2019-03-08 11:26 UTC
[PATCH] ath10k: support PCIe enter L1 state
2019-03-08 9:42 UTC (9+ messages)
[ath6kl:ath11k-bringup 3/42] drivers/net/wireless/ath/ath11k/qmi.c:1989:1-7: ERROR: missing iounmap; ioremap on line 1935 and execution via conditional on line 1965 (fwd)
2019-03-07 21:46 UTC
[ath6kl:ath11k-bringup 3/42] drivers/net/wireless/ath/ath11k/debug_htt_stats.c:850:59: sparse: warning: Using plain integer as NULL pointer
2019-03-07 21:03 UTC
[ath6kl:ath11k-bringup 25/42] drivers/net/wireless/ath/ath11k/debug.c:358:8: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'?
2019-03-07 20:14 UTC
[PATCH] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection
2019-03-06 17:36 UTC
[PATCH] ath10k: Drop WARN_ON()s that always trigger during system resume
2019-03-03 17:24 UTC (3+ messages)
[PATCH] ath10k: Drop WARN_ON()s that always trigger during system resume
2019-03-03 17:24 UTC
[PATCH 0/2] Add xo calibration support for wifi rf clock
2019-03-02 5:06 UTC (3+ messages)
` [PATCH 1/2] dt: bindings: add dt entry for XO calibration support
` [PATCH 2/2] ath10k: Add xo calibration support for wifi rf clock
[PATCH] ath10k: Modify CE4 src buffer entries to 2048 for WCN3990
2019-03-02 4:36 UTC
[PATCH] ath10k: Move board id and fw version logging to info level
2019-03-01 14:50 UTC
ACS scans not returning noise floor
2019-03-01 9:55 UTC (4+ messages)
[PATCH AUTOSEL 4.20 44/81] ath10k: correct bus type for WCN3990
2019-02-28 15:07 UTC
[PATCH v2] ath10k: Fill rx duration for each peer in fw_stats for WCN3990
2019-02-28 8:48 UTC (2+ messages)
[PATCH v2 0/4] Fix inconsistencies observed in population of tx_stats in debugfs
2019-02-28 8:46 UTC (6+ messages)
` [PATCH v2 1/4] ath10k: Fix the incorrect updation of NSS data in tx stats
` [PATCH v2 2/4] ath10k: Fix the wrong updation of BW in tx_stats debugfs entry
` [PATCH v2 3/4] ath10k: Fix the wrong updation of SGI in tx_stats debugfs
` [PATCH v2 4/4] ath10k: Fix the wrong calculation ht_idx and idx of rate table for tx_stats
[PATCHv2 0/9] cfg80211/mac80211: Add support for TID specific configuration
2019-02-27 12:43 UTC (15+ messages)
` [PATCHv2 1/9] nl80211: New netlink command "
` [PATCHv2 2/9] nl80211: Add new netlink attribute for TID speicific retry count
` [PATCHv2 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable
` [PATCHv2 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS
` [PATCHv2 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
` [PATCHv2 6/9] mac80211: Add api to support configuring TID specific configuration
` [PATCHv2 7/9] ath10k: Add wmi command support for station specific TID config
` [PATCHv2 8/9] ath10k: Add new api to support TID specific configuration
` [PATCHv2 9/9] ath10k: Add extended TID configuration support
[PATCH 1/2] ath10k: Extended the HTT stats support to retrieve Mu-MIMO related stats
2019-02-27 11:24 UTC (2+ messages)
` [PATCH 2/2] ath10k: Added support to reset HTT stats in debugfs
[PATCH 0/2] Exdented HTT stats support and provide debugfs
2019-02-27 11:23 UTC
[PATCH 0/2] Add support for per peer HTT tx stats for WCN3990
2019-02-27 7:13 UTC (3+ messages)
` [PATCH 1/2] ath10k: Add support for adding htt_rx_ops based on htt_version
` [PATCH 2/2] ath10k: Add support for per peer HTT tx stats for WCN3990
[PATCH 0/2] Add support for per peer HTT tx stats for WCN3990
2019-02-27 7:12 UTC
[PATCH] ath10k: update the max num of peers supported for WCN3990
2019-02-26 13:07 UTC (2+ messages)
[PATCH] ath10k: remove the calibration data fetch for sdio
2019-02-26 13:06 UTC (2+ messages)
[PATCH] ath10k: Fix length of wmi tlv command for protected mgmt frames
2019-02-26 13:04 UTC (2+ messages)
[PATCH 0/4] ath10k: small fixes for SDIO support
2019-02-26 13:02 UTC (6+ messages)
` [PATCH 1/4] ath10k: sdio: set hi_acs_flags
` [PATCH 2/4] ath10k: sdio: disable fwlog prints
` [PATCH 3/4] ath10k: sdio: reset chip on power_down()
` [PATCH 4/4] ath10k: don't report unset rssi values to mac80211
[PATCH] ath10k: correct the format of host memory chunks in wmi init command
2019-02-26 13:00 UTC (2+ messages)
[PATCH] ath10k: Enhance logging for vdev pdev & peer set param
2019-02-26 12:59 UTC (2+ messages)
[PATCH v3 1/2] ath10k: Add support for ack rssi value of management tx packets
2019-02-26 12:58 UTC (2+ messages)
[PATCH] ath10k: Fix descriptor size in ce tx completion for WCN3990
2019-02-26 12:56 UTC (2+ messages)
[PATCH] ath10k: Fill rx duration for each peer in fw_stats for WCN3990
2019-02-26 12:09 UTC (4+ messages)
[PATCH] ath10k: fix incorrect multicast/broadcast rate setting
2019-02-26 9:23 UTC (3+ messages)
[PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
2019-02-26 9:16 UTC (2+ messages)
[ath6kl:pending 13/22] drivers/net/wireless/ath/ath10k/wmi-tlv.c:1423:42: warning: left shift count >= width of type
2019-02-25 16:11 UTC
[PATCH v3] ath10k: Add support to provide higher range mem chunks in wmi init command
2019-02-25 12:48 UTC
[PATCH] ath10k: Add peer param map for tlv and non-tlv
2019-02-25 10:15 UTC (2+ messages)
[PATCH 0/4] Fix inconsistencies observed in population of tx_stats in debugfs
2019-02-24 21:35 UTC (7+ messages)
` [PATCH 1/4] ath10k: Fix the incorrect updation of NSS data in tx stats
` [PATCH 2/4] ath10k: Fix the wrong updation of BW in tx_stats debugfs entry
` [PATCH 3/4] ath10k: Fix the wrong updation of SGI in tx_stats debugfs
` [PATCH 4/4] ath10k: Fix the wrong calculation ht_idx and idx of rate table for tx_stats
[ath6kl:ath10k-pending-sdio-usb 16/16] drivers/net/wireless/ath/ath10k/mac.c:5223:26: warning: cast from pointer to integer of different size
2019-02-24 2:23 UTC
[PATCH v2 0/2] Change sk_pacing_shift in ieee80211_hw for best tx throughput
2019-02-23 11:49 UTC (30+ messages)
` [PATCH v2 2/2] ath10k: Set sk_pacing_shift to 6 for 11AC WiFi chips
` [PATCH] mac80211: Change default tx_sk_pacing_shift to 7
ath10k-firmware: QCA4019 hw1.0: Add Qxwlan E2600AC specific BDFs
2019-02-22 9:00 UTC
[PATCH v3] iw: Add support for controlling tx power for per station
2019-02-22 6:37 UTC
[PATCH v3 3/3] ath10k: add support for controlling tx power to a station
2019-02-22 6:35 UTC
[PATCH v3 2/3] mac80211: store tx power value from user to station
2019-02-22 6:34 UTC
[PATCH v3 1/3] cfg80211: Add support to set tx power for a station associated
2019-02-22 6:33 UTC
[BUG] ath10k firmware crash 100% recreated this way
2019-02-21 16:33 UTC (2+ messages)
Can't parse chan info event return from firmware 10.2.4-1.0-00043
2019-02-21 11:56 UTC
ath10k-firmware: QCA4019 hw1.0: Update Linksys EA6350v3 specific BDFs
2019-02-20 18:25 UTC (2+ messages)
[PATCH RFC] out-of-order frames
2019-02-20 17:05 UTC (2+ messages)
[PATCH] ath10k: Add peer delete response event
2019-02-20 14:30 UTC
[PATCH] ath10k: switch to use SPDX license identifiers
2019-02-20 8:34 UTC (2+ messages)
[PATCH] ath10k: change 'unsigned long int' to 'unsigned long'
2019-02-20 8:32 UTC (2+ messages)
[PATCH v2] ath10k: Enable support for beacon interval per VAP
2019-02-19 12:24 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox