From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.sablalik.us ([66.80.92.144]) by bombadil.infradead.org with smtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1WurhJ-0005em-Ve for ath10k@lists.infradead.org; Wed, 11 Jun 2014 23:12:51 +0000 Date: Wed, 11 Jun 2014 19:12:09 -0400 Subject: basic help request From: Peter Sabat Message-ID: Mime-version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Hoping that I can possibly get a pointer on what I=B9m doing wrong w/ ath10k and hostapd. I=B9m running a 3.14 kernel and installed the 3.15-rc-1 backports. I can start hostapd, but no matter what I do, I can=B9t see the SSID. I have also just tried to use N by itself. I am using a WLE900V5-23 card. The things that I=B9ve noticed so far is that I am unable to use the v2 firmware =AD additionally, even w/ the v1 firmware, I get a: ath10k: Invalid firmware magic Also, iw doesn=B9t seem to report everything : iw wlan0 info: Interface wlan0 ifindex 3 type AP wiphy 0 Here is some dmesg: [Wed Jun 11 18:23:19 2014] ath10k_pci 0000:03:00.0: BAR 0: assigned [mem 0x90400000-0x905fffff 64bit] [Wed Jun 11 18:23:19 2014] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002) [Wed Jun 11 18:23:19 2014] ath10k_pci 0000:03:00.0: irq 116 for MSI/MSI-X [Wed Jun 11 18:23:19 2014] ath10k: pci irq MSI [Wed Jun 11 18:23:19 2014] ath10k: Invalid firmware magic [Wed Jun 11 18:23:21 2014] ath10k: qca988x hw2.0 (0x4100016c) fw 1.0.0.636 api 1 htt 2.1 [Wed Jun 11 18:23:21 2014] ath: EEPROM regdomain: 0x0 [Wed Jun 11 18:23:21 2014] ath: EEPROM indicates default country code should be used [Wed Jun 11 18:23:21 2014] ath: doing EEPROM country->regdmn map search [Wed Jun 11 18:23:21 2014] ath: country maps to regdmn code: 0x3a [Wed Jun 11 18:23:21 2014] ath: Country alpha2 being used: US [Wed Jun 11 18:23:21 2014] ath: Regpair used: 0x3a [Wed Jun 11 18:57:43 2014] ath10k_pci 0000:03:00.0: irq 116 for MSI/MSI-X LSPCI 03:00.0 Network controller: Qualcomm Atheros QCA988x 802.11ac Wireless Network Adapter Flags: bus master, fast devsel, latency 0, IRQ 116 Memory at 90400000 (64-bit, non-prefetchable) [size=3D2M] Expansion ROM at 90600000 [disabled] [size=3D64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=3D1/8 Maskable+ 64bit- Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: ath10k_pci modinfo : filename: = /lib/modules/3.14.4-scst/updates/drivers/net/wireless/ath/ath10k/ath10k_pci .ko firmware: ath10k/QCA988X/hw2.0/board.bin firmware: ath10k/QCA988X/hw2.0/otp.bin firmware: ath10k/QCA988X/hw2.0/firmware.bin license: Dual BSD/GPL description: Driver support for Atheros QCA988X PCIe devices author: Qualcomm Atheros version: backported from Linux (v3.15-rc1-0-gc9eaa44) using backports v3.15-rc1-1-0-g2a25483 srcversion: 2F02C56BB696ECC1D986D19 alias: pci:v0000168Cd0000003Csv*sd*bc*sc*i* depends: ath10k_core,compat vermagic: 3.14.4-scst SMP mod_unload modversions parm: ath10k_target_ps:Enable ath10k Target (SoC) PS option (uint) parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint) Iw list: Wiphy phy0 Band 1: Capabilities: 0x19e3 RX LDPC HT20/HT40 Static SM Power Save RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-23 Frequencies: * 5180 MHz [36] (17.0 dBm) * 5200 MHz [40] (17.0 dBm) * 5220 MHz [44] (17.0 dBm) * 5240 MHz [48] (17.0 dBm) * 5260 MHz [52] (23.0 dBm) (passive scanning, no IBSS, radar detection) * 5280 MHz [56] (23.0 dBm) (passive scanning, no IBSS, radar detection) * 5300 MHz [60] (23.0 dBm) (passive scanning, no IBSS, radar detection) * 5320 MHz [64] (23.0 dBm) (passive scanning, no IBSS, radar detection) * 5500 MHz [100] (disabled) * 5520 MHz [104] (disabled) * 5540 MHz [108] (disabled) * 5560 MHz [112] (disabled) * 5580 MHz [116] (disabled) * 5600 MHz [120] (disabled) * 5620 MHz [124] (disabled) * 5640 MHz [128] (disabled) * 5660 MHz [132] (disabled) * 5680 MHz [136] (disabled) * 5700 MHz [140] (disabled) * 5745 MHz [149] (30.0 dBm) * 5765 MHz [153] (30.0 dBm) * 5785 MHz [157] (30.0 dBm) * 5805 MHz [161] (30.0 dBm) * 5825 MHz [165] (30.0 dBm) Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 16 max scan IEs length: 199 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed, P2P-client } <=3D 8, #{ P2P-GO } <=3D 3, #{ AP } <=3D 7, total <=3D 8, #channels <=3D 1, STA/AP BI must match Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * Unknown command (104) * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports AP-side u-APSD. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. Any help would be greatly appreciated. Pete _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k