From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.sablalik.us ([66.80.92.144]) by bombadil.infradead.org with smtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Wux64-0001NH-G0 for ath10k@lists.infradead.org; Thu, 12 Jun 2014 04:58:45 +0000 Date: Thu, 12 Jun 2014 00:58:05 -0400 Subject: Re: basic help request From: Peter Sabat Message-ID: In-Reply-To: <5399261C.9010906@candelatech.com> Mime-version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Ben Greear Cc: ath10k@lists.infradead.org So I grabbed it again - I just did a wget before, maybe something got garbled there. Thanks again for the help though. But we have some progress it seems: [Thu Jun 12 00:28:49 2014] ath10k_pci 0000:03:00.0: BAR 0: assigned [mem 0x90400000-0x905fffff 64bit] [Thu Jun 12 00:28:49 2014] ath10k_pci 0000:03:00.0: irq 116 for MSI/MSI-X [Thu Jun 12 00:28:49 2014] ath10k: pci irq MSI [Thu Jun 12 00:28:50 2014] ath10k: qca988x hw2.0 (0x4100016c) fw 10.1.467.2-1 api 2 htt 2.1 [Thu Jun 12 00:28:51 2014] ath: EEPROM regdomain: 0x0 [Thu Jun 12 00:28:51 2014] ath: EEPROM indicates default country code should be used [Thu Jun 12 00:28:51 2014] ath: doing EEPROM country->regdmn map search [Thu Jun 12 00:28:51 2014] ath: country maps to regdmn code: 0x3a [Thu Jun 12 00:28:51 2014] ath: Country alpha2 being used: US [Thu Jun 12 00:28:51 2014] ath: Regpair used: 0x3a additionally : root@server2:~/build/ath-master/drivers/net/wireless/ath/ath10k# hostapd /etc/hostapd/test.conf Configuration file: /etc/hostapd/test.conf wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE ACS: Automatic channel selection started, this may take a bit wlan0: interface state COUNTRY_UPDATE->ACS wlan0: ACS-STARTED wlan0: ACS-COMPLETED freq=5220 channel=44 wlan0: interface state ACS->HT_SCAN Using interface wlan0 with hwaddr 04:f0:21:0c:a6:5c and ssid "ath10k-test" wlan0: interface state HT_SCAN->ENABLED wlan0: AP-ENABLED info still shows old FW though : root@server2:/lib/firmware/ath10k/QCA988X/hw2.0# modinfo ath10k_pci filename: /lib/modules/3.14.4-scst/updates/drivers/net/wireless/ath/ath10k/ath10k_pci .ko firmware: ath10k/QCA988X/hw2.0/board.bin firmware: ath10k/QCA988X/hw2.0/otp.bin firmware: ath10k/QCA988X/hw2.0/firmware.bin license: Dual BSD/GPL description: Driver support for Atheros QCA988X PCIe devices author: Qualcomm Atheros version: backported from Linux (v3.15-rc1-0-gc9eaa44) using backports v3.15-rc1-1-0-g2a25483 srcversion: 2F02C56BB696ECC1D986D19 alias: pci:v0000168Cd0000003Csv*sd*bc*sc*i* depends: ath10k_core,compat vermagic: 3.14.4-scst SMP mod_unload modversions parm: ath10k_target_ps:Enable ath10k Target (SoC) PS option (uint) parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint) But still no SSID visible!! argh Have the .conf at bare minimum ctrl_interface=/var/run/hostapd country_code=US bridge=br0 interface=wlan0 driver=nl80211 ssid=ath10k-test hw_mode=a channel=44 ieee80211n=1 root@server2:/etc/hostapd# hostapd -d /etc/hostapd/test2.conf random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd/test2.conf rfkill: initial event: idx=6 type=1 op=0 soft=0 hard=0 nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Supported cipher 00-0f-ac:6 nl80211: Using driver-based off-channel TX nl80211: interface wlan0 in phy phy6 nl80211: Set mode ifindex 10 iftype 3 (AP) nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0 nl80211: Subscribe to mgmt frames with AP handle 0x1a0a480 nl80211: Register frame type=0xb0 nl_handle=0x1a0a480 match= nl80211: Register frame type=0x0 nl_handle=0x1a0a480 match= nl80211: Register frame type=0x20 nl_handle=0x1a0a480 match= nl80211: Register frame type=0xa0 nl_handle=0x1a0a480 match= nl80211: Register frame type=0xc0 nl_handle=0x1a0a480 match= nl80211: Register frame type=0xd0 nl_handle=0x1a0a480 match= nl80211: Register frame type=0x40 nl_handle=0x1a0a480 match= nl80211: Add own interface ifindex 4 nl80211: if_indices[16]: 4 nl80211: Add own interface ifindex 10 nl80211: if_indices[16]: 4 10 nl80211: Adding interface wlan0 into bridge br0 phy: phy6 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Previous country code US, new country code US nl80211: Regulatory information - country=US nl80211: 2402-2472 @ 40 MHz 30 mBm nl80211: 5170-5250 @ 80 MHz 17 mBm nl80211: 5250-5330 @ 80 MHz 23 mBm (DFS) nl80211: 5735-5835 @ 80 MHz 30 mBm nl80211: 57240-63720 @ 2160 MHz 40 mBm hw vht capab: 0x338001b2, conf vht capab: 0x0 Completing interface initialization Mode: IEEE 802.11a Channel: 44 Frequency: 5220 MHz DFS 0 channels required radar detection nl80211: Set freq 5220 (ht_enabled=1, vht_enabled=0, bandwidth=20 MHz, cf1=5220 MHz, cf2=0 MHz) RATE[0] rate=60 flags=0x1 RATE[1] rate=90 flags=0x0 RATE[2] rate=120 flags=0x1 RATE[3] rate=180 flags=0x0 RATE[4] rate=240 flags=0x1 RATE[5] rate=360 flags=0x0 RATE[6] rate=480 flags=0x0 RATE[7] rate=540 flags=0x0 hostapd_setup_bss(hapd=0x1a099d0 (wlan0), first=1) wlan0: Flushing old station entries nl80211: flush -> DEL_STATION wlan0 (all) wlan0: Deauthenticate all stations nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 nlmode=3 nl80211: send_mlme -> send_frame nl80211: send_frame - Use bss->freq=5220 nl80211: send_frame -> send_frame_cmd nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=5220 wait=0) wpa_driver_nl80211_set_key: ifindex=10 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=10 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=10 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=10 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 Using interface wlan0 with hwaddr 04:f0:21:0c:a6:5c and ssid "ath10k-test" nl80211: Set beacon (beacon_set=0) nl80211: Beacon head - hexdump(len=62): 80 00 00 00 ff ff ff ff ff ff 04 f0 21 0c a6 5c 04 f0 21 0c a6 5c 00 00 00 00 00 00 00 00 00 00 64 00 01 00 00 0b 61 74 68 31 30 6b 2d 74 65 73 74 01 08 8c 12 98 24 b0 48 60 6c 03 01 2c nl80211: Beacon tail - hexdump(len=88): 2d 1a 0c 00 1b ff ff ff 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 2c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 00 00 00 00 00 40 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 nl80211: ifindex=10 nl80211: beacon_int=100 nl80211: dtim_period=2 nl80211: ssid - hexdump_ascii(len=11): 61 74 68 31 30 6b 2d 74 65 73 74 ath10k-test nl80211: hidden SSID not in use nl80211: privacy=0 nl80211: auth_algs=0x3 nl80211: wpa_version=0x0 nl80211: key_mgmt_suites=0x2 nl80211: pairwise_ciphers=0x1 nl80211: group_cipher=0x1 nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 nl80211: Set wlan0 operstate 0->1 (UP) netlink: Operstate: ifindex=10 linkmode=-1 (no change), operstate=6 (IF_OPER_UP) wlan0: interface state COUNTRY_UPDATE->ENABLED wlan0: AP-ENABLED wlan0: Setup of interface done. ctrl_iface not configured! random: Got 18/20 bytes from /dev/random RTM_NEWLINK: ifi_index=10 ifname=wlan0 operstate=2 linkmode=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK: ifi_index=10 ifname=wlan0 operstate=2 linkmode=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK: ifi_index=10 ifname=wlan0 operstate=2 linkmode=0 master=4 ifi_flags=0x1003 ([UP]) RTM_NEWLINK: ifi_index=10 ifname=wlan0 master=4 operstate=2 ifi_flags=0x1003 ([UP]) nl80211: Add ifindex 4 for bridge br0 nl80211: Add own interface ifindex 4 nl80211: ifindex 4 already in the list RTM_NEWLINK: ifi_index=4 ifname=br0 operstate=6 linkmode=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) wlan0: Event INTERFACE_STATUS (5) received Unknown event 5 RTM_NEWLINK: ifi_index=10 ifname=wlan0 master=4 operstate=6 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) nl80211: Add ifindex 4 for bridge br0 nl80211: Add own interface ifindex 4 nl80211: ifindex 4 already in the list RTM_NEWLINK: ifi_index=10 ifname=wlan0 master=4 operstate=6 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) nl80211: Add ifindex 4 for bridge br0 nl80211: Add own interface ifindex 4 nl80211: ifindex 4 already in the list RTM_NEWLINK: ifi_index=10 ifname=wlan0 master=4 operstate=6 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) nl80211: Add ifindex 4 for bridge br0 nl80211: Add own interface ifindex 4 nl80211: ifindex 4 already in the list RTM_NEWLINK: ifi_index=10 ifname=wlan0 operstate=6 linkmode=0 master=4 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) random: Got 2/2 bytes from /dev/random On 6/12/14, 12:01 AM, "Ben Greear" wrote: > > >On 06/11/2014 04:46 PM, Peter Sabat wrote: >> As instructed :) >> >> >> >> -rwxr-xr-x 1 root root 24347 Jun 11 19:32 firmware-2.bin >> -rwxr-xr-x 1 root root 2116 Jan 30 08:41 board.bin >> -rwxr-xr-x 1 root root 249093 Jan 30 08:41 firmware.bin >> -rwxr-xr-x 1 root root 5402 Jan 30 08:41 otp.bin > >That firmware-2.bin looks way too small, should be around 200kbytes. > >Where did you get it from? > >Thanks, >Ben > >-- >Ben Greear >Candela Technologies Inc http://www.candelatech.com > >_______________________________________________ >ath10k mailing list >ath10k@lists.infradead.org >http://lists.infradead.org/mailman/listinfo/ath10k _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k