From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail2.candelatech.com ([208.74.158.173]) by bombadil.infradead.org with esmtp (Exim 4.87 #1 (Red Hat Linux)) id 1d9Bpa-0005b3-JX for ath10k@lists.infradead.org; Fri, 12 May 2017 14:46:12 +0000 Subject: Re: ath10k: controlling TX aggregation References: From: Ben Greear Message-ID: Date: Fri, 12 May 2017 07:45:49 -0700 MIME-Version: 1.0 In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Krishna Chaitanya , linux-wireless , ath10k What chipset, and what firmware version? Thanks, Ben On 05/12/2017 07:43 AM, Krishna Chaitanya wrote: > Hi, > > I am doing some comparative tests, wanted to configure common > settings btw all STA's. wanted to limit agg_size to 24 in ath10k with > the below command. > > echo "3 24" > /sys/kernel/debug/ieee80211/phy0/ath10k/htt_max_amsdu_ampdu > > The ADDBA request still has 64 and when i run iperf it is aggregating 64 frames. > > Except for 1 no number takes effect. If i configure 1 there is no ADDBA exchange > initiated by ath10k. > > Is this expected? Can we control the aggregation size through driver? > > latest wireless-drivers-next and linux-firmware git is used. > -- Ben Greear Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k