ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Nerijus Baliūnas" <nerijus@users.sourceforge.net>
To: ath10k@lists.infradead.org
Subject: QCA6174 firmware crash
Date: Sat, 19 Feb 2022 15:30:30 +0200	[thread overview]
Message-ID: <e004286a32d506994d3805f624cba00a@users.sourceforge.net> (raw)

Hello,

07:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless 
Network Adapter [168c:003e] (rev 20)

Firmware is newest:

# ethtool -i wlp7s0
driver: ath10k_pci
version: 5.16.9-200.fc35.x86_64
firmware-version: SW_RM.1.1.1-00157-QCARMSWPZ-1
expansion-rom-version:.
bus-info: 0000:07:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no

# dmesg | grep ath10k
[    6.698345] ath10k_pci 0000:07:00.0: pci irq msi oper_irq_mode 2 irq_mode 
0 reset_mode 0
[    6.927480] ath10k_pci 0000:07:00.0: qca6174 hw2.1 target 0x05010000 
chip_id 0x003405ff sub 11ad:0804
[    6.928453] ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 0 
dfs 0 testmode 0
[    6.929729] ath10k_pci 0000:07:00.0: firmware ver 
SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 features ignore-otp,no-4addr-pad crc32 
10bf8e08
[    6.995609] ath10k_pci 0000:07:00.0: board_file api 2 bmi_id N/A crc32 
ae2e275a
[    8.223964] ath10k_pci 0000:07:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp 
max-sta 32 raw 0 hwcrypto 1

It crashes every time I try to connect to TP-Link Archer MR600 v2 Firmware 
Version:‪1.5.0 0.9.1 v0001.0 Build 210914 wifi router:

ath10k_pci 0000:07:00.0: firmware crashed! (guid 
c1610eff-6185-467f-aba7-26ec9d9b8605)
ath10k_pci 0000:07:00.0: qca6174 hw2.1 target 0x05010000 chip_id 0x003405ff 
sub 11ad:0804
ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
ath10k_pci 0000:07:00.0: firmware ver SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 
features ignore-otp,no-4addr-pad crc32 10bf8e08
ath10k_pci 0000:07:00.0: board_file api 2 bmi_id N/A crc32 ae2e275a
ath10k_pci 0000:07:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 
0 hwcrypto 1
ath10k_pci 0000:07:00.0: firmware register dump:
ath10k_pci 0000:07:00.0: [00]: 0x05010000 0x00000000 0x0092E4DC 0x0EB2E199
ath10k_pci 0000:07:00.0: [04]: 0x0092E4DC 0x00060130 0x00000018 0x0041A760
ath10k_pci 0000:07:00.0: [08]: 0x0EB2E185 0x00400000 0x00000000 0x000A5C88
ath10k_pci 0000:07:00.0: [12]: 0x00000009 0x00000000 0x0096C09C 0x0096C0A7
ath10k_pci 0000:07:00.0: [16]: 0x0096BDBC 0x009287BD 0x00000000 0x009287BD
ath10k_pci 0000:07:00.0: [20]: 0x4092E4DC 0x0041A710 0x00000000 0x0F000000
ath10k_pci 0000:07:00.0: [24]: 0x809432A7 0x0041A770 0x0040D45C 0xC092E4DC
ath10k_pci 0000:07:00.0: [28]: 0x80942BC4 0x0041A790 0x0EB2E185 0x00400000
ath10k_pci 0000:07:00.0: [32]: 0x80947BA7 0x0041A7B0 0x004050A8 0x0040E074
ath10k_pci 0000:07:00.0: [36]: 0x809BDECC 0x0041A7D0 0x004050A8 0x0040E074
ath10k_pci 0000:07:00.0: [40]: 0x8099638C 0x0041A7F0 0x004050A8 0x00000000
ath10k_pci 0000:07:00.0: [44]: 0x80992076 0x0041A810 0x00408420 0x0046FFE8
ath10k_pci 0000:07:00.0: [48]: 0x80996BD3 0x0041A830 0x00408420 0x00000000
ath10k_pci 0000:07:00.0: [52]: 0x800B4405 0x0041A850 0x00422318 0x00005002
ath10k_pci 0000:07:00.0: [56]: 0x809A6C34 0x0041A8E0 0x0042932C 0x0042CA44
ath10k_pci 0000:07:00.0: Copy Engine register dump:
ath10k_pci 0000:07:00.0: [00]: 0x00034400   1   1   3   3
ath10k_pci 0000:07:00.0: [01]: 0x00034800  13  13 272 273
ath10k_pci 0000:07:00.0: [02]: 0x00034c00  13  13  76  77
ath10k_pci 0000:07:00.0: [03]: 0x00035000  27  27  28  27
ath10k_pci 0000:07:00.0: [04]: 0x00035400 1629 1629 112  48
ath10k_pci 0000:07:00.0: [05]: 0x00035800   0   0   0   0
ath10k_pci 0000:07:00.0: [06]: 0x00035c00  27  27  27  27
ath10k_pci 0000:07:00.0: [07]: 0x00036000   1   1   1   1
ath10k_pci 0000:07:00.0: failed to create WMI vdev 1: -108


ath10k_pci 0000:07:00.0: firmware crashed! (guid 
016cc818-beee-4422-b9dd-fee9fd612a03)
ath10k_pci 0000:07:00.0: qca6174 hw2.1 target 0x05010000 chip_id 0x003405ff 
sub 11ad:0804
ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
ath10k_pci 0000:07:00.0: firmware ver SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 
features ignore-otp,no-4addr-pad crc32 10bf8e08
ath10k_pci 0000:07:00.0: board_file api 2 bmi_id N/A crc32 ae2e275a
ath10k_pci 0000:07:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 
0 hwcrypto 1
ath10k_pci 0000:07:00.0: firmware register dump:
ath10k_pci 0000:07:00.0: [00]: 0x05010000 0x00000000 0x0092E4DC 0x1029E198
ath10k_pci 0000:07:00.0: [04]: 0x0092E4DC 0x00060130 0x00000018 0x0041A760
ath10k_pci 0000:07:00.0: [08]: 0x1029E184 0x00400000 0x00000000 0x000A5C88
ath10k_pci 0000:07:00.0: [12]: 0x0000000D 0x00000000 0x0096C09C 0x0096C0A7
ath10k_pci 0000:07:00.0: [16]: 0x00000004 0x0040A090 0x0000FFFF 0x00000002
ath10k_pci 0000:07:00.0: [20]: 0x80996343 0x0041A7D0 0x00408420 0x0040D45C
ath10k_pci 0000:07:00.0: [24]: 0x80942BC4 0x0041A790 0x1029E184 0x00400000
ath10k_pci 0000:07:00.0: [28]: 0x0041A7B0 0x0041A790 0x00000024 0x00000001
ath10k_pci 0000:07:00.0: [32]: 0x80947BA7 0x0041A7B0 0x004050A8 0x0040E074
ath10k_pci 0000:07:00.0: [36]: 0x1029E164 0x00000000 0x00000000 0x00000001
ath10k_pci 0000:07:00.0: [40]: 0x809BDECC 0x0041A7D0 0x004050A8 0x0040E074
ath10k_pci 0000:07:00.0: [44]: 0x004124C4 0x004050D4 0x00000000 0x00404D9C
ath10k_pci 0000:07:00.0: [48]: 0x8099638C 0x0041A7F0 0x004050A8 0x00000000
ath10k_pci 0000:07:00.0: [52]: 0x00000000 0x004124C4 0x004050CC 0x00000005
ath10k_pci 0000:07:00.0: [56]: 0x80992076 0x0041A810 0x00408420 0x0046FFE8
ath10k_pci 0000:07:00.0: Copy Engine register dump:
ath10k_pci 0000:07:00.0: [00]: 0x00034400   1   1   3   3
ath10k_pci 0000:07:00.0: [01]: 0x00034800   5   5 488 489
ath10k_pci 0000:07:00.0: [02]: 0x00034c00   8   8  71  72
ath10k_pci 0000:07:00.0: [03]: 0x00035000  25  25  25  25
ath10k_pci 0000:07:00.0: [04]: 0x00035400 665 665 142  78
ath10k_pci 0000:07:00.0: [05]: 0x00035800   0   0   0   0
ath10k_pci 0000:07:00.0: [06]: 0x00035c00  26  26  26  26
ath10k_pci 0000:07:00.0: [07]: 0x00036000   1   1   1   1
ath10k_pci 0000:07:00.0: failed to submit keepalive on vdev 1: -108
ath10k_pci 0000:07:00.0: failed to disable keepalive on vdev 1: -108

Regards,
Nerijus

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2022-02-19 13:39 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-19 13:30 Nerijus Baliūnas [this message]
2022-02-20 22:32 ` QCA6174 firmware crash Nerijus Baliūnas
  -- strict thread matches above, loose matches on Subject: below --
2016-04-25 20:35 Michael Ney
2016-04-26  6:08 ` Michal Kazior
2016-04-26 19:52   ` Michael Ney
2016-04-27  6:42     ` Michal Kazior
2016-04-27 22:43       ` Michael Ney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e004286a32d506994d3805f624cba00a@users.sourceforge.net \
    --to=nerijus@users.sourceforge.net \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox