From: Anilkumar Kolli <akolli@codeaurora.org>
To: ath11k@lists.infradead.org
Subject: [PATCH 2/2] ath11k: qmi clean up in ath11k_qmi_wlanfw_wlan_cfg_send()
Date: Tue, 29 Oct 2019 12:24:28 +0530 [thread overview]
Message-ID: <1572332068-2611-2-git-send-email-akolli@codeaurora.org> (raw)
In-Reply-To: <1572332068-2611-1-git-send-email-akolli@codeaurora.org>
Use pipe_id id instead of ret in for loop.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/ce.h | 9 +++++++--
drivers/net/wireless/ath/ath11k/qmi.c | 28 +++++++++++++---------------
2 files changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ce.h b/drivers/net/wireless/ath/ath11k/ce.h
index 9f25bad504e9..6f56c4d2ce10 100644
--- a/drivers/net/wireless/ath/ath11k/ce.h
+++ b/drivers/net/wireless/ath/ath11k/ce.h
@@ -57,7 +57,12 @@
struct ath11k_base;
-/* Establish a mapping between a service/direction and a pipe. */
+/*
+ * Establish a mapping between a service/direction and a pipe.
+ * Configuration information for a Copy Engine pipe and services.
+ * Passed from Host to Target through QMI message and must be in
+ * little endian format.
+ */
struct service_to_pipe {
__le32 service_id;
__le32 pipedir;
@@ -66,7 +71,7 @@ struct service_to_pipe {
/*
* Configuration information for a Copy Engine pipe.
- * Passed from Host to Target during startup (one per CE).
+ * Passed from Host to Target through QMI message during startup (one per CE).
*
* NOTE: Structure is shared between Host software and Target firmware!
*/
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 88e626f2a844..dffb8629f14b 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -2035,7 +2035,7 @@ static int ath11k_qmi_wlanfw_wlan_cfg_send(struct ath11k_base *ab)
struct ce_pipe_config *ce_cfg;
struct service_to_pipe *svc_cfg;
struct qmi_txn txn = {};
- int ret = 0;
+ int ret = 0, pipe_num;
ce_cfg = (struct ce_pipe_config *)ab->qmi.ce_cfg.tgt_ce;
svc_cfg = (struct service_to_pipe *)ab->qmi.ce_cfg.svc_to_ce_map;
@@ -2052,24 +2052,22 @@ static int ath11k_qmi_wlanfw_wlan_cfg_send(struct ath11k_base *ab)
req->tgt_cfg_valid = 1;
/* This is number of CE configs */
- req->tgt_cfg_len = ((ab->qmi.ce_cfg.tgt_ce_len) /
- (sizeof(struct ce_pipe_config))) - 1;
- for (ret = 0; ret <= req->tgt_cfg_len ; ret++) {
- req->tgt_cfg[ret].pipe_num = ce_cfg[ret].pipenum;
- req->tgt_cfg[ret].pipe_dir = ce_cfg[ret].pipedir;
- req->tgt_cfg[ret].nentries = ce_cfg[ret].nentries;
- req->tgt_cfg[ret].nbytes_max = ce_cfg[ret].nbytes_max;
- req->tgt_cfg[ret].flags = ce_cfg[ret].flags;
+ req->tgt_cfg_len = ab->qmi.ce_cfg.tgt_ce_len;
+ for (pipe_num = 0; pipe_num <= req->tgt_cfg_len ; pipe_num++) {
+ req->tgt_cfg[pipe_num].pipe_num = ce_cfg[pipe_num].pipenum;
+ req->tgt_cfg[pipe_num].pipe_dir = ce_cfg[pipe_num].pipedir;
+ req->tgt_cfg[pipe_num].nentries = ce_cfg[pipe_num].nentries;
+ req->tgt_cfg[pipe_num].nbytes_max = ce_cfg[pipe_num].nbytes_max;
+ req->tgt_cfg[pipe_num].flags = ce_cfg[pipe_num].flags;
}
req->svc_cfg_valid = 1;
/* This is number of Service/CE configs */
- req->svc_cfg_len = (ab->qmi.ce_cfg.svc_to_ce_map_len) /
- (sizeof(struct service_to_pipe));
- for (ret = 0; ret < req->svc_cfg_len; ret++) {
- req->svc_cfg[ret].service_id = svc_cfg[ret].service_id;
- req->svc_cfg[ret].pipe_dir = svc_cfg[ret].pipedir;
- req->svc_cfg[ret].pipe_num = svc_cfg[ret].pipenum;
+ req->svc_cfg_len = ab->qmi.ce_cfg.svc_to_ce_map_len;
+ for (pipe_num = 0; pipe_num < req->svc_cfg_len; pipe_num++) {
+ req->svc_cfg[pipe_num].service_id = svc_cfg[pipe_num].service_id;
+ req->svc_cfg[pipe_num].pipe_dir = svc_cfg[pipe_num].pipedir;
+ req->svc_cfg[pipe_num].pipe_num = svc_cfg[pipe_num].pipenum;
}
req->shadow_reg_valid = 0;
req->shadow_reg_v2_valid = 0;
--
1.9.1
_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2019-10-29 6:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 6:54 [PATCH 1/2] ath11k: qmi clean up ce and HTC service config update Anilkumar Kolli
2019-10-29 6:54 ` Anilkumar Kolli [this message]
2019-11-07 9:04 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1572332068-2611-2-git-send-email-akolli@codeaurora.org \
--to=akolli@codeaurora.org \
--cc=ath11k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox