ATH11K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Anilkumar Kolli <akolli@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: Anilkumar Kolli <akolli@codeaurora.org>, linux-wireless@vger.kernel.org
Subject: [PATCH 05/11] ath11k: Add qcn9074 mhi controller config
Date: Wed, 10 Feb 2021 14:12:04 +0530	[thread overview]
Message-ID: <1612946530-28504-6-git-send-email-akolli@codeaurora.org> (raw)
In-Reply-To: <1612946530-28504-1-git-send-email-akolli@codeaurora.org>

Add MHI config for QCN9074 also populate ath11k_hw_params for QCN9074.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/core.c |  12 ++++
 drivers/net/wireless/ath/ath11k/core.h |   1 +
 drivers/net/wireless/ath/ath11k/mhi.c  | 116 ++++++++++++++++++++++++++++++---
 drivers/net/wireless/ath/ath11k/qmi.h  |   1 +
 4 files changed, 122 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 9ccc7231afa0..fa452de49457 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -147,6 +147,18 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.cold_boot_calib = false,
 		.supports_suspend = true,
 	},
+	{
+		.name = "qcn9074 hw1.0",
+		.hw_rev = ATH11K_HW_QCN9074_HW10,
+		.fw = {
+			.dir = "QCN9074/hw1.0",
+			.board_size = 256 * 1024,
+			.cal_size = 256 * 1024,
+		},
+		.max_radios = 1,
+		.single_pdev_only = false,
+		.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCN9074,
+	},
 };
 
 int ath11k_core_suspend(struct ath11k_base *ab)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 8d29845774df..9a8fb23577b0 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -105,6 +105,7 @@ enum ath11k_hw_rev {
 	ATH11K_HW_IPQ8074,
 	ATH11K_HW_QCA6390_HW20,
 	ATH11K_HW_IPQ6018_HW10,
+	ATH11K_HW_QCN9074_HW10,
 };
 
 enum ath11k_firmware_mode {
diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index 09858e516903..626764da4d6f 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -7,10 +7,11 @@
 #include "core.h"
 #include "debug.h"
 #include "mhi.h"
+#include "pci.h"
 
 #define MHI_TIMEOUT_DEFAULT_MS	90000
 
-static struct mhi_channel_config ath11k_mhi_channels[] = {
+static struct mhi_channel_config ath11k_mhi_channels_qca6390[] = {
 	{
 		.num = 0,
 		.name = "LOOPBACK",
@@ -69,7 +70,7 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 	},
 };
 
-static struct mhi_event_config ath11k_mhi_events[] = {
+static struct mhi_event_config ath11k_mhi_events_qca6390[] = {
 	{
 		.num_elements = 32,
 		.irq_moderation_ms = 0,
@@ -92,15 +93,108 @@ static struct mhi_event_config ath11k_mhi_events[] = {
 	},
 };
 
-static struct mhi_controller_config ath11k_mhi_config = {
+static struct mhi_controller_config ath11k_mhi_config_qca6390 = {
 	.max_channels = 128,
 	.timeout_ms = 2000,
 	.use_bounce_buf = false,
 	.buf_len = 0,
-	.num_channels = ARRAY_SIZE(ath11k_mhi_channels),
-	.ch_cfg = ath11k_mhi_channels,
-	.num_events = ARRAY_SIZE(ath11k_mhi_events),
-	.event_cfg = ath11k_mhi_events,
+	.num_channels = ARRAY_SIZE(ath11k_mhi_channels_qca6390),
+	.ch_cfg = ath11k_mhi_channels_qca6390,
+	.num_events = ARRAY_SIZE(ath11k_mhi_events_qca6390),
+	.event_cfg = ath11k_mhi_events_qca6390,
+};
+
+static struct mhi_channel_config ath11k_mhi_channels_qcn9074[] = {
+	{
+		.num = 0,
+		.name = "LOOPBACK",
+		.num_elements = 32,
+		.event_ring = 1,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = 0x14,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+	},
+	{
+		.num = 1,
+		.name = "LOOPBACK",
+		.num_elements = 32,
+		.event_ring = 1,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = 0x14,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+	},
+	{
+		.num = 20,
+		.name = "IPCR",
+		.num_elements = 32,
+		.event_ring = 1,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = 0x14,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+	},
+	{
+		.num = 21,
+		.name = "IPCR",
+		.num_elements = 32,
+		.event_ring = 1,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = 0x14,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = true,
+	},
+};
+
+static struct mhi_event_config ath11k_mhi_events_qcn9074[] = {
+	{
+		.num_elements = 32,
+		.irq_moderation_ms = 0,
+		.irq = 1,
+		.data_type = MHI_ER_CTRL,
+		.mode = MHI_DB_BRST_DISABLE,
+		.hardware_event = false,
+		.client_managed = false,
+		.offload_channel = false,
+	},
+	{
+		.num_elements = 256,
+		.irq_moderation_ms = 1,
+		.irq = 2,
+		.mode = MHI_DB_BRST_DISABLE,
+		.priority = 1,
+		.hardware_event = false,
+		.client_managed = false,
+		.offload_channel = false,
+	},
+};
+
+static struct mhi_controller_config ath11k_mhi_config_qcn9074 = {
+	.max_channels = 30,
+	.timeout_ms = 10000,
+	.use_bounce_buf = false,
+	.buf_len = 0,
+	.num_channels = ARRAY_SIZE(ath11k_mhi_channels_qcn9074),
+	.ch_cfg = ath11k_mhi_channels_qcn9074,
+	.num_events = ARRAY_SIZE(ath11k_mhi_events_qcn9074),
+	.event_cfg = ath11k_mhi_events_qcn9074,
 };
 
 void ath11k_mhi_set_mhictrl_reset(struct ath11k_base *ab)
@@ -221,6 +315,7 @@ int ath11k_mhi_register(struct ath11k_pci *ab_pci)
 {
 	struct ath11k_base *ab = ab_pci->ab;
 	struct mhi_controller *mhi_ctrl;
+	struct mhi_controller_config *ath11k_mhi_config;
 	int ret;
 
 	mhi_ctrl = mhi_alloc_controller();
@@ -254,7 +349,12 @@ int ath11k_mhi_register(struct ath11k_pci *ab_pci)
 	mhi_ctrl->read_reg = ath11k_mhi_op_read_reg;
 	mhi_ctrl->write_reg = ath11k_mhi_op_write_reg;
 
-	ret = mhi_register_controller(mhi_ctrl, &ath11k_mhi_config);
+	if (ab->hw_rev == ATH11K_HW_QCA6390_HW20)
+		ath11k_mhi_config = &ath11k_mhi_config_qca6390;
+	else if (ab->hw_rev == ATH11K_HW_QCN9074_HW10)
+		ath11k_mhi_config = &ath11k_mhi_config_qcn9074;
+
+	ret = mhi_register_controller(mhi_ctrl, ath11k_mhi_config);
 	if (ret) {
 		ath11k_err(ab, "failed to register to mhi bus, err = %d\n", ret);
 		mhi_free_controller(mhi_ctrl);
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index a7d01c295e77..3d5930330703 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -21,6 +21,7 @@
 #define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01	0x02
 #define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCA6390	0x01
 #define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074	0x02
+#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCN9074	0x07
 #define ATH11K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01	32
 #define ATH11K_QMI_RESP_LEN_MAX			8192
 #define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	52
-- 
2.7.4


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  parent reply	other threads:[~2021-02-10  8:42 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-10  8:41 [PATCH 00/11] ath11k: Add support for QCN9074 Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 01/11] ath11k: Refactor ath11k_msi_config Anilkumar Kolli
2021-02-17  9:38   ` Kalle Valo
2021-02-10  8:42 ` [PATCH 02/11] ath11k: Move qmi service_ins_id to hw_params Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 03/11] ath11k: qmi: increase the number of fw segments Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 04/11] ath11k: Update memory segment count for qcn9074 Anilkumar Kolli
2021-02-10  8:42 ` Anilkumar Kolli [this message]
2021-02-10  8:42 ` [PATCH 06/11] ath11k: add static window support for register access Anilkumar Kolli
2021-02-16 16:45   ` Kalle Valo
2021-02-17  2:28     ` akolli
2021-02-17  9:28       ` Kalle Valo
2022-03-28 16:44   ` Hamdi Issam
2022-06-23 10:44     ` Karthikeyan Periyasamy (QUIC)
2021-02-10  8:42 ` [PATCH 07/11] ath11k: add hal support for QCN9074 Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 08/11] ath11k: add data path " Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 09/11] ath11k: add CE interrupt " Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 10/11] ath11k: add extended " Anilkumar Kolli
2021-02-10  8:42 ` [PATCH 11/11] ath11k: add qcn9074 pci device support Anilkumar Kolli
2021-02-16 16:36   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1612946530-28504-6-git-send-email-akolli@codeaurora.org \
    --to=akolli@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox