ATH11K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Anilkumar Kolli <akolli@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Anilkumar Kolli <akolli@codeaurora.org>
Subject: [PATCH v2 1/3] ath11k: Add htt cmd to enable full monitor mode
Date: Tue,  7 Dec 2021 18:24:53 +0530	[thread overview]
Message-ID: <1638881695-22155-2-git-send-email-akolli@codeaurora.org> (raw)
In-Reply-To: <1638881695-22155-1-git-send-email-akolli@codeaurora.org>

A new hw_param full_monitor_mode is added to enable full
monitor support for QCN9074.
HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE cmd is sent to FW
to enable the full monitor mode.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
V2:
  - Rebase on latest ath.git

 drivers/net/wireless/ath/ath11k/core.c  |  5 ++++
 drivers/net/wireless/ath/ath11k/dp.h    | 28 +++++++++++++++++++
 drivers/net/wireless/ath/ath11k/dp_tx.c | 48 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/dp_tx.h |  2 ++
 drivers/net/wireless/ath/ath11k/hw.h    |  1 +
 5 files changed, 84 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index dd1a1bb078c3..072387bcdeb5 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -74,6 +74,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = true,
+		.full_monitor_mode = false,
 		.supports_shadow_regs = false,
 		.idle_ps = false,
 		.supports_sta_ps = false,
@@ -128,6 +129,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = true,
+		.full_monitor_mode = false,
 		.supports_shadow_regs = false,
 		.idle_ps = false,
 		.supports_sta_ps = false,
@@ -181,6 +183,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
+		.full_monitor_mode = false,
 		.supports_shadow_regs = true,
 		.idle_ps = true,
 		.supports_sta_ps = true,
@@ -234,6 +237,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = true,
+		.full_monitor_mode = true,
 		.supports_shadow_regs = false,
 		.idle_ps = false,
 		.supports_sta_ps = false,
@@ -287,6 +291,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
+		.full_monitor_mode = false,
 		.supports_shadow_regs = true,
 		.idle_ps = true,
 		.supports_sta_ps = true,
diff --git a/drivers/net/wireless/ath/ath11k/dp.h b/drivers/net/wireless/ath/ath11k/dp.h
index a4c36a9be338..10f234b3f11c 100644
--- a/drivers/net/wireless/ath/ath11k/dp.h
+++ b/drivers/net/wireless/ath/ath11k/dp.h
@@ -292,6 +292,7 @@ enum htt_h2t_msg_type {
 	HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG	= 0xc,
 	HTT_H2T_MSG_TYPE_EXT_STATS_CFG		= 0x10,
 	HTT_H2T_MSG_TYPE_PPDU_STATS_CFG		= 0x11,
+	HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE	= 0x17,
 };
 
 #define HTT_VER_REQ_INFO_MSG_ID		GENMASK(7, 0)
@@ -957,6 +958,33 @@ struct htt_rx_ring_tlv_filter {
 	u32 pkt_filter_flags3; /* DATA */
 };
 
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_INFO0_MSG_TYPE	GENMASK(7, 0)
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_INFO0_PDEV_ID	GENMASK(15, 8)
+
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_ENABLE			BIT(0)
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_ZERO_MPDUS_END		BIT(1)
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_NON_ZERO_MPDUS_END	BIT(2)
+#define HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_RELEASE_RING		GENMASK(10, 3)
+
+/**
+ * Enumeration for full monitor mode destination ring select
+ * 0 - REO destination ring select
+ * 1 - FW destination ring select
+ * 2 - SW destination ring select
+ * 3 - Release destination ring select
+ */
+enum htt_rx_full_mon_release_ring {
+	HTT_RX_MON_RING_REO,
+	HTT_RX_MON_RING_FW,
+	HTT_RX_MON_RING_SW,
+	HTT_RX_MON_RING_RELEASE,
+};
+
+struct htt_rx_full_monitor_mode_cfg_cmd {
+	u32 info0;
+	u32 cfg;
+} __packed;
+
 /* HTT message target->host */
 
 enum htt_t2h_msg_type {
diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index 7587e1679ec3..8560f3b33812 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -1033,6 +1033,15 @@ int ath11k_dp_tx_htt_monitor_mode_ring_config(struct ath11k *ar, bool reset)
 	struct htt_rx_ring_tlv_filter tlv_filter = {0};
 	int ret = 0, ring_id = 0, i;
 
+	if (ab->hw_params.full_monitor_mode) {
+		ret = ath11k_dp_tx_htt_rx_full_mon_setup(ab,
+							 dp->mac_id, !reset);
+		if (ret < 0) {
+			ath11k_err(ab, "failed to setup full monitor %d\n", ret);
+			return ret;
+		}
+	}
+
 	ring_id = dp->rxdma_mon_buf_ring.refill_buf_ring.ring_id;
 
 	if (!reset) {
@@ -1098,3 +1107,42 @@ int ath11k_dp_tx_htt_monitor_mode_ring_config(struct ath11k *ar, bool reset)
 
 	return ret;
 }
+
+int ath11k_dp_tx_htt_rx_full_mon_setup(struct ath11k_base *ab, int mac_id,
+				       bool config)
+{
+	struct htt_rx_full_monitor_mode_cfg_cmd *cmd;
+	struct sk_buff *skb;
+	int ret, len = sizeof(*cmd);
+
+	skb = ath11k_htc_alloc_skb(ab, len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, len);
+	cmd = (struct htt_rx_full_monitor_mode_cfg_cmd *)skb->data;
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->info0 = FIELD_PREP(HTT_RX_FULL_MON_MODE_CFG_CMD_INFO0_MSG_TYPE,
+				HTT_H2T_MSG_TYPE_RX_FULL_MONITOR_MODE);
+
+	cmd->info0 |= FIELD_PREP(HTT_RX_FULL_MON_MODE_CFG_CMD_INFO0_PDEV_ID, mac_id);
+
+	cmd->cfg = HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_ENABLE |
+		   FIELD_PREP(HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_RELEASE_RING,
+			      HTT_RX_MON_RING_SW);
+	if (config) {
+		cmd->cfg |= HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_ZERO_MPDUS_END |
+			    HTT_RX_FULL_MON_MODE_CFG_CMD_CFG_NON_ZERO_MPDUS_END;
+	}
+
+	ret = ath11k_htc_send(&ab->htc, ab->dp.eid, skb);
+	if (ret)
+		goto err_free;
+
+	return 0;
+
+err_free:
+	dev_kfree_skb_any(skb);
+
+	return ret;
+}
diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.h b/drivers/net/wireless/ath/ath11k/dp_tx.h
index 698b907b878d..e373dbccf417 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.h
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.h
@@ -37,4 +37,6 @@ int ath11k_dp_tx_htt_rx_filter_setup(struct ath11k_base *ab, u32 ring_id,
 				     int rx_buf_size,
 				     struct htt_rx_ring_tlv_filter *tlv_filter);
 
+int ath11k_dp_tx_htt_rx_full_mon_setup(struct ath11k_base *ab, int mac_id,
+				       bool config);
 #endif
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 2c9d232ebfed..fe6e0cb9476c 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -168,6 +168,7 @@ struct ath11k_hw_params {
 
 	u16 interface_modes;
 	bool supports_monitor;
+	bool full_monitor_mode;
 	bool supports_shadow_regs;
 	bool idle_ps;
 	bool supports_sta_ps;
-- 
2.7.4


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  reply	other threads:[~2021-12-07 12:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-07 12:54 [PATCH v2 0/3] ath11k: add full monitor mode support for QCN9074 Anilkumar Kolli
2021-12-07 12:54 ` Anilkumar Kolli [this message]
2021-12-09  8:10   ` [PATCH v2 1/3] ath11k: Add htt cmd to enable full monitor mode Kalle Valo
2021-12-07 12:54 ` [PATCH v2 2/3] ath11k: add software monitor ring descriptor for full monitor Anilkumar Kolli
2021-12-07 12:54 ` [PATCH v2 3/3] ath11k: Process full monitor mode rx support Anilkumar Kolli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1638881695-22155-2-git-send-email-akolli@codeaurora.org \
    --to=akolli@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox