ATH11K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Anilkumar Kolli <akolli@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
	Seevalamuthu Mariappan <seevalam@codeaurora.org>,
	Anilkumar Kolli <akolli@codeaurora.org>
Subject: [PATCH v2] ath11k: Change qcn9074 fw to operate in mode-2
Date: Wed,  8 Dec 2021 19:19:50 +0530	[thread overview]
Message-ID: <1638971390-7160-1-git-send-email-akolli@codeaurora.org> (raw)

From: Seevalamuthu Mariappan <seevalam@codeaurora.org>

In mode-2 QCN9074 firmware uses 15MB of host memory and firmware
request 1MB size segements in QMI, whereas in mode-0 firmware
uses 45MB of host memory and each segment is of 2MB size.
In mode-2 firmware operates with reduced number of vdevs and peers.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
V2:
  - add num_vdevs, num_peers to hw params (Kalle)

 drivers/net/wireless/ath/ath11k/core.c | 18 ++++++++++++++++++
 drivers/net/wireless/ath/ath11k/hw.h   |  9 ++++++---
 drivers/net/wireless/ath/ath11k/qmi.c  |  2 +-
 3 files changed, 25 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 1d983fde6fc9..470c932e30cf 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -79,6 +79,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = true,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -134,6 +137,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = true,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -188,6 +194,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -242,6 +251,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 2,
+		.num_vdevs = 8,
+		.num_peers = 128,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
 		.fix_l1ss = true,
@@ -296,6 +308,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
 		.fix_l1ss = false,
@@ -349,6 +364,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
 		.fix_l1ss = false,
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index fe6e0cb9476c..c17631924481 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -12,9 +12,9 @@
 /* Target configuration defines */
 
 /* Num VDEVS per radio */
-#define TARGET_NUM_VDEVS	(16 + 1)
+#define TARGET_NUM_VDEVS	(ab->hw_params.num_vdevs)
 
-#define TARGET_NUM_PEERS_PDEV	(512 + TARGET_NUM_VDEVS)
+#define TARGET_NUM_PEERS_PDEV	(ab->hw_params.num_peers + TARGET_NUM_VDEVS)
 
 /* Num of peers for Single Radio mode */
 #define TARGET_NUM_PEERS_SINGLE		(TARGET_NUM_PEERS_PDEV)
@@ -26,7 +26,7 @@
 #define TARGET_NUM_PEERS_DBS_SBS	(3 * TARGET_NUM_PEERS_PDEV)
 
 /* Max num of stations (per radio) */
-#define TARGET_NUM_STATIONS	512
+#define TARGET_NUM_STATIONS	(ab->hw_params.num_peers)
 
 #define TARGET_NUM_PEERS(x)	TARGET_NUM_PEERS_##x
 #define TARGET_NUM_PEER_KEYS	2
@@ -173,6 +173,9 @@ struct ath11k_hw_params {
 	bool idle_ps;
 	bool supports_sta_ps;
 	bool cold_boot_calib;
+	int fw_mem_mode;
+	u32 num_vdevs;
+	u32 num_peers;
 	bool supports_suspend;
 	u32 hal_desc_sz;
 	bool fix_l1ss;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 625d525a86b9..3b9ba0e03a66 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -2877,7 +2877,7 @@ int ath11k_qmi_init_service(struct ath11k_base *ab)
 	memset(&ab->qmi.target_mem, 0, sizeof(struct target_mem_chunk));
 	ab->qmi.ab = ab;
 
-	ab->qmi.target_mem_mode = ATH11K_QMI_TARGET_MEM_MODE_DEFAULT;
+	ab->qmi.target_mem_mode = ab->hw_params.fw_mem_mode;
 	ret = qmi_handle_init(&ab->qmi.handle, ATH11K_QMI_RESP_LEN_MAX,
 			      &ath11k_qmi_ops, ath11k_qmi_msg_handlers);
 	if (ret < 0) {
-- 
2.7.4


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

             reply	other threads:[~2021-12-08 13:50 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-08 13:49 Anilkumar Kolli [this message]
2021-12-09 10:36 ` [PATCH v2] ath11k: Change qcn9074 fw to operate in mode-2 Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1638971390-7160-1-git-send-email-akolli@codeaurora.org \
    --to=akolli@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=seevalam@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox