ATH11K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: John Crispin <john@phrozen.org>
To: Johannes Berg <johannes@sipsolutions.net>,
	Kalle Valo <kvalo@codeaurora.org>
Cc: Shashidhar Lakkavalli <slakkavalli@datto.com>,
	linux-wireless@vger.kernel.org, ath11k@lists.infradead.org,
	John Crispin <john@phrozen.org>
Subject: [PATCH 7/7] ath11k: add spatial reuse support
Date: Mon, 20 May 2019 13:02:04 +0200	[thread overview]
Message-ID: <20190520110204.27588-8-john@phrozen.org> (raw)
In-Reply-To: <20190520110204.27588-1-john@phrozen.org>

Trigger the WMI call en/disabling OBSS PD when the bss config changes or we
assoc to an AP that broadcasts the IE.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 10 ++++++++
 drivers/net/wireless/ath/ath11k/wmi.c | 35 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/wmi.h | 16 ++++++++++++
 3 files changed, 61 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index ead546a33726..1f92a8c9baa3 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1714,6 +1714,12 @@ static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 					1);
 	if (ret)
 		ath11k_warn(ar->ab, "Unable to authorize BSS peer: %d\n", ret);
+
+	ret = ath11k_wmi_send_obss_spr_cmd(ar, arvif->vdev_id,
+					   &ap_sta->he_obss_pd);
+	if (ret)
+		ath11k_warn(ar->ab, "failed to set vdev %i OBSS PD parameters: %d\n",
+			    arvif->vdev_id, ret);
 }
 
 static void ath11k_bss_disassoc(struct ieee80211_hw *hw,
@@ -1905,6 +1911,10 @@ static void ath11k_bss_info_changed(struct ieee80211_hw *hw,
 			ath11k_wmi_send_twt_disable_cmd(ar, ar->pdev_idx);
 	}
 
+	if (changed & BSS_CHANGED_HE_OBSS_PD)
+		ath11k_wmi_send_obss_spr_cmd(ar, arvif->vdev_id,
+					     &info->he_obss_pd);
+
 	mutex_unlock(&ar->conf_mutex);
 }
 
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 8fb45e9c1175..50c84f9e9cbf 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -2584,6 +2584,41 @@ ath11k_wmi_send_twt_disable_cmd(struct ath11k *ar, u32 pdev_id)
 	return ret;
 }
 
+int
+ath11k_wmi_send_obss_spr_cmd(struct ath11k *ar, u32 vdev_id,
+			     struct ieee80211_he_obss_pd *he_obss_pd)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct ath11k_base *ab = wmi->wmi_sc->sc;
+	struct wmi_obss_spatial_reuse_params_cmd *cmd;
+	struct sk_buff *skb;
+	int ret, len;
+
+	len = sizeof(*cmd);
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_sc, len);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (void *)skb->data;
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG,
+				     WMI_TAG_OBSS_SPATIAL_REUSE_SET_CMD) |
+			  FIELD_PREP(WMI_TLV_LEN, len - TLV_HDR_SIZE);
+	cmd->vdev_id = vdev_id;
+	cmd->enable = he_obss_pd->enable;
+	cmd->obss_min = he_obss_pd->min_offset;
+	cmd->obss_max = he_obss_pd->max_offset;
+
+	ret = ath11k_wmi_cmd_send(wmi, skb,
+				  WMI_PDEV_OBSS_PD_SPATIAL_REUSE_CMDID);
+	if (ret) {
+		ath11k_warn(ab,
+			"Failed to send WMI_PDEV_OBSS_PD_SPATIAL_REUSE_CMDID");
+		dev_kfree_skb(skb);
+	}
+	return ret;
+}
+
 static inline void ath11k_fill_band_to_mac_param(struct ath11k_base  *soc,
 				struct wmi_host_pdev_band_to_mac *band_to_mac)
 {
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index c74aa98439ca..10f2a83db327 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -172,6 +172,8 @@ enum wmi_cmd_group {
 	WMI_GRP_WLM,            /* 0x3c */
 	WMI_GRP_11K_OFFLOAD,    /* 0x3d */
 	WMI_GRP_TWT,            /* 0x3e */
+	WMI_GRP_MOTION_DET,     /* 0x3f */
+	WMI_GRP_SPATIAL_REUSE,  /* 0x40 */
 
 };
 
@@ -541,6 +543,9 @@ enum wmi_tlv_cmd_id {
 	WMI_TWT_DEL_DIALOG_CMDID,
 	WMI_TWT_PAUSE_DIALOG_CMDID,
 	WMI_TWT_RESUME_DIALOG_CMDID,
+	WMI_PDEV_OBSS_PD_SPATIAL_REUSE_CMDID =
+				WMI_TLV_CMD(WMI_GRP_SPATIAL_REUSE),
+	WMI_PDEV_OBSS_PD_SPATIAL_REUSE_SET_DEF_OBSS_THRESH_CMDID,
 };
 
 enum wmi_tlv_event_id {
@@ -5114,6 +5119,15 @@ struct wmi_twt_disable_params_cmd {
 	u32 pdev_id;
 };
 
+struct wmi_obss_spatial_reuse_params_cmd {
+	u32 tlv_header;
+	u32 pdev_id;
+	u32 enable;
+	s32 obss_min;
+	s32 obss_max;
+	u32 vdev_id;
+};
+
 struct target_resource_config {
 	u32 num_vdevs;
 	u32 num_peers;
@@ -5305,4 +5319,6 @@ void ath11k_wmi_fw_stats_fill(struct ath11k *ar,
 int ath11k_wmi_simulate_radar(struct ath11k *ar);
 int ath11k_wmi_send_twt_enable_cmd(struct ath11k *ar, u32 pdev_id);
 int ath11k_wmi_send_twt_disable_cmd(struct ath11k *ar, u32 pdev_id);
+int ath11k_wmi_send_obss_spr_cmd(struct ath11k *ar, u32 vdev_id,
+				 struct ieee80211_he_obss_pd *he_obss_pd);
 #endif
-- 
2.20.1


_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

      parent reply	other threads:[~2019-05-20 11:02 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-20 11:01 [PATCH 0/7] mac80211: HE: add TWT and SPR/OBSSPD support John Crispin
2019-05-20 11:01 ` [PATCH 1/7] mac80211: HE: dynamically enable the TWT requester support on STA interfaces John Crispin
2019-05-20 11:01 ` [PATCH 2/7] mac80211: HE: allow turning TWT responder support on and off via netlink John Crispin
2019-05-20 11:02 ` [PATCH 3/7] ath11k: add TWT support John Crispin
2019-05-20 11:02 ` [PATCH 4/7] mac80211: HE: add Spatial Reuse IE parsing support John Crispin
2019-05-20 11:02 ` [PATCH 5/7] mac80211: HE: allow setting spatial reuse parameters when bringing up an AP John Crispin
2019-05-20 11:02 ` [PATCH 6/7] mac80211: propagate spatial reuse info into ieee80211_sta John Crispin
2019-05-20 11:02 ` John Crispin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190520110204.27588-8-john@phrozen.org \
    --to=john@phrozen.org \
    --cc=ath11k@lists.infradead.org \
    --cc=johannes@sipsolutions.net \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=slakkavalli@datto.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox