ATH11K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sven Eckelmann <sven@narfation.org>
To: ath11k@lists.infradead.org
Cc: Sven Eckelmann <seckelmann@datto.com>
Subject: [RFC PATCH] ath11k: register HE mesh capabilities
Date: Mon,  3 Jun 2019 17:17:19 +0200	[thread overview]
Message-ID: <20190603151719.31974-1-sven@narfation.org> (raw)

From: Sven Eckelmann <seckelmann@datto.com>

The capabilities for the HE mesh are generated from the capabilities
reported by the fw. But the firmware only reports the overall capabilities
and not the one which are specific for mesh. Some of them (TWT, MU UL/DL,
TB PPDU, ...) require an infrastructure setup with a main STA (AP)
controlling the operations. This is not the case for mesh and thus these
capabilities are removed from the list of capabilities.

Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
---
 drivers/net/wireless/ath/ath11k/mac.c | 56 +++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 3eb0761c0114..e4f363670704 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3221,6 +3221,7 @@ static int ath11k_mac_copy_he_cap(struct ath11k_pdev_cap *cap,
 		switch (i) {
 		case NL80211_IFTYPE_STATION:
 		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_MESH_POINT:
 			break;
 
 		default:
@@ -3249,6 +3250,61 @@ static int ath11k_mac_copy_he_cap(struct ath11k_pdev_cap *cap,
 			he_cap_elem->phy_cap_info[9] |=
 				IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU;
 			break;
+		case NL80211_IFTYPE_MESH_POINT:
+			he_cap_elem->mac_cap_info[0] &=
+				~(IEEE80211_HE_MAC_CAP0_TWT_RES |
+				  IEEE80211_HE_MAC_CAP0_TWT_REQ);
+			he_cap_elem->mac_cap_info[2] &=
+				~(IEEE80211_HE_MAC_CAP2_TRS |
+				  IEEE80211_HE_MAC_CAP2_BCAST_TWT |
+				  IEEE80211_HE_MAC_CAP2_MU_CASCADING);
+			he_cap_elem->mac_cap_info[3] &=
+				~(IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED |
+				  IEEE80211_HE_MAC_CAP2_BCAST_TWT |
+				  IEEE80211_HE_MAC_CAP2_MU_CASCADING);
+			he_cap_elem->mac_cap_info[4] &=
+				~(IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG |
+				  IEEE80211_HE_MAC_CAP4_BQR);
+			he_cap_elem->mac_cap_info[5] &=
+				~(IEEE80211_HE_MAC_CAP5_SUBCHAN_SELECVITE_TRANSMISSION |
+				  IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU |
+				  IEEE80211_HE_MAC_CAP5_PUNCTURED_SOUNDING |
+				  IEEE80211_HE_MAC_CAP5_HT_VHT_TRIG_FRAME_RX);
+
+			he_cap_elem->phy_cap_info[2] &=
+				~(IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+				  IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO);
+			he_cap_elem->phy_cap_info[3] &=
+				~(IEEE80211_HE_PHY_CAP3_RX_HE_MU_PPDU_FROM_NON_AP_STA |
+				  IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK |
+				  IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK);
+			he_cap_elem->phy_cap_info[4] &=
+				~IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
+			he_cap_elem->phy_cap_info[5] &=
+				~IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK;
+			he_cap_elem->phy_cap_info[6] &=
+				~(IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU |
+				  IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB |
+				  IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB |
+				  IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO);
+			he_cap_elem->phy_cap_info[7] &=
+				~(IEEE80211_HE_PHY_CAP7_SRP_BASED_SR |
+				  IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_AR |
+				  IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ |
+				  IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ);
+			he_cap_elem->phy_cap_info[8] &=
+				~(IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI |
+				  IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G |
+				  IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
+				  IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU);
+			he_cap_elem->phy_cap_info[9] &=
+				~(IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM |
+				  IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK |
+				  IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU |
+				  IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU |
+				  IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB |
+				  IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB);
+			break;
 		}
 
 		he_cap->he_mcs_nss_supp.rx_mcs_80 =
-- 
2.20.1


_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

             reply	other threads:[~2019-06-03 15:17 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-03 15:17 Sven Eckelmann [this message]
2019-06-03 15:20 ` [RFC PATCH] ath11k: register HE mesh capabilities Sven Eckelmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190603151719.31974-1-sven@narfation.org \
    --to=sven@narfation.org \
    --cc=ath11k@lists.infradead.org \
    --cc=seckelmann@datto.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox