ATH11K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@kernel.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v3 2/2] ath11k: Change qcn9074 fw to operate in mode-2
Date: Thu,  9 Dec 2021 12:43:51 +0200	[thread overview]
Message-ID: <20211209104351.9811-3-kvalo@kernel.org> (raw)
In-Reply-To: <20211209104351.9811-1-kvalo@kernel.org>

From: Seevalamuthu Mariappan <seevalam@codeaurora.org>

In mode-2 QCN9074 firmware uses 15MB of host memory and firmware
request 1MB size segements in QMI, whereas in mode-0 firmware
uses 45MB of host memory and each segment is of 2MB size.
In mode-2 firmware operates with reduced number of vdevs and peers.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Patchwork-Id: 12664445
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/core.c | 18 ++++++++++++++++++
 drivers/net/wireless/ath/ath11k/hw.h   |  9 ++++++---
 drivers/net/wireless/ath/ath11k/qmi.c  |  2 +-
 drivers/net/wireless/ath/ath11k/qmi.h  |  1 -
 4 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index c08e96522332..606e867c36ec 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -79,6 +79,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = true,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -134,6 +137,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = true,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -188,6 +194,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
 		.fix_l1ss = true,
@@ -242,6 +251,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = false,
 		.supports_sta_ps = false,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 2,
+		.num_vdevs = 8,
+		.num_peers = 128,
 		.supports_suspend = false,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
 		.fix_l1ss = true,
@@ -296,6 +308,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
 		.fix_l1ss = false,
@@ -349,6 +364,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.idle_ps = true,
 		.supports_sta_ps = true,
 		.cold_boot_calib = false,
+		.fw_mem_mode = 0,
+		.num_vdevs = 16 + 1,
+		.num_peers = 512,
 		.supports_suspend = true,
 		.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
 		.fix_l1ss = false,
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 7ea3207692dc..23f3ce741636 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -12,9 +12,9 @@
 /* Target configuration defines */
 
 /* Num VDEVS per radio */
-#define TARGET_NUM_VDEVS(ab)	(16 + 1)
+#define TARGET_NUM_VDEVS(ab)	(ab->hw_params.num_vdevs)
 
-#define TARGET_NUM_PEERS_PDEV(ab) (512 + TARGET_NUM_VDEVS(ab))
+#define TARGET_NUM_PEERS_PDEV(ab) (ab->hw_params.num_peers + TARGET_NUM_VDEVS(ab))
 
 /* Num of peers for Single Radio mode */
 #define TARGET_NUM_PEERS_SINGLE(ab) (TARGET_NUM_PEERS_PDEV(ab))
@@ -26,7 +26,7 @@
 #define TARGET_NUM_PEERS_DBS_SBS(ab)	(3 * TARGET_NUM_PEERS_PDEV(ab))
 
 /* Max num of stations (per radio) */
-#define TARGET_NUM_STATIONS(ab)	512
+#define TARGET_NUM_STATIONS(ab)	(ab->hw_params.num_peers)
 
 #define TARGET_NUM_PEERS(ab, x)	TARGET_NUM_PEERS_##x(ab)
 #define TARGET_NUM_PEER_KEYS	2
@@ -173,6 +173,9 @@ struct ath11k_hw_params {
 	bool idle_ps;
 	bool supports_sta_ps;
 	bool cold_boot_calib;
+	int fw_mem_mode;
+	u32 num_vdevs;
+	u32 num_peers;
 	bool supports_suspend;
 	u32 hal_desc_sz;
 	bool fix_l1ss;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 25eb22cbeaeb..b71781398fc4 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -2830,7 +2830,7 @@ int ath11k_qmi_init_service(struct ath11k_base *ab)
 	memset(&ab->qmi.target_mem, 0, sizeof(struct target_mem_chunk));
 	ab->qmi.ab = ab;
 
-	ab->qmi.target_mem_mode = ATH11K_QMI_TARGET_MEM_MODE_DEFAULT;
+	ab->qmi.target_mem_mode = ab->hw_params.fw_mem_mode;
 	ret = qmi_handle_init(&ab->qmi.handle, ATH11K_QMI_RESP_LEN_MAX,
 			      &ath11k_qmi_ops, ath11k_qmi_msg_handlers);
 	if (ret < 0) {
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index d9e95b700765..49db39bf638c 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -34,7 +34,6 @@
 
 #define QMI_WLANFW_MAX_DATA_SIZE_V01		6144
 #define ATH11K_FIRMWARE_MODE_OFF		4
-#define ATH11K_QMI_TARGET_MEM_MODE_DEFAULT	0
 #define ATH11K_COLD_BOOT_FW_RESET_DELAY		(40 * HZ)
 
 struct ath11k_base;
-- 
2.20.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

      parent reply	other threads:[~2021-12-09 10:44 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-09 10:43 [PATCH v3 0/2] ath11k: Change qcn9074 fw to operate in mode-2 Kalle Valo
2021-12-09 10:43 ` [PATCH v3 1/2] ath11k: add ab to TARGET_NUM_VDEVS & co Kalle Valo
2021-12-14 15:32   ` Kalle Valo
2021-12-09 10:43 ` Kalle Valo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211209104351.9811-3-kvalo@kernel.org \
    --to=kvalo@kernel.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox