public inbox for ath11k@lists.infradead.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@kernel.org>
To: mhi@lists.linux.dev
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org
Subject: [PATCH RFC v2 1/8] bus: mhi: host: add mhi_power_down_no_destroy()
Date: Mon, 27 Nov 2023 18:20:15 +0200	[thread overview]
Message-ID: <20231127162022.518834-2-kvalo@kernel.org> (raw)
In-Reply-To: <20231127162022.518834-1-kvalo@kernel.org>

From: Baochen Qiang <quic_bqiang@quicinc.com>

If ath11k tries to call mhi_power_up() during resume it fails:

ath11k_pci 0000:06:00.0: timeout while waiting for restart complete

This happens because when calling mhi_power_up() the MHI subsystem eventually
calls device_add() from mhi_create_devices() but the device creation is
deferred:

mhi mhi0_IPCR: Driver qcom_mhi_qrtr force probe deferral

The reason for deferring device creation is explained in dpm_prepare():

	/*
	 * It is unsafe if probing of devices will happen during suspend or
	 * hibernation and system behavior will be unpredictable in this case.
	 * So, let's prohibit device's probing here and defer their probes
	 * instead. The normal behavior will be restored in dpm_complete().
	 */

Because the device probe is deferred, the qcom_mhi_qrtr_probe() is not called and
qcom_mhi_qrtr_dl_callback() fails silently as qdev is zero:

static void qcom_mhi_qrtr_dl_callback(struct mhi_device *mhi_dev,
				      struct mhi_result *mhi_res)
{
	struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
	int rc;

	if (!qdev || mhi_res->transaction_status)
		return;

So what this means that QRTR is not delivering messages and the QMI connection
is not working between ath11k and the firmware, resulting a failure in firmware
initialisation.

To fix this add new function mhi_power_down_no_destroy() which does not destroy
the devices during power down. This way mhi_power_up() can be called during
resume and we can get ath11k hibernation working with the following patches.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/bus/mhi/host/init.c     |  1 +
 drivers/bus/mhi/host/internal.h |  1 +
 drivers/bus/mhi/host/pm.c       | 26 +++++++++++++++++++-------
 include/linux/mhi.h             | 29 +++++++++++++++++++++++++++--
 4 files changed, 48 insertions(+), 9 deletions(-)

diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
index 65ceac1837f9..e626b03ffafa 100644
--- a/drivers/bus/mhi/host/init.c
+++ b/drivers/bus/mhi/host/init.c
@@ -43,6 +43,7 @@ const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX] = {
 	[DEV_ST_TRANSITION_FP] = "FLASH PROGRAMMER",
 	[DEV_ST_TRANSITION_SYS_ERR] = "SYS ERROR",
 	[DEV_ST_TRANSITION_DISABLE] = "DISABLE",
+	[DEV_ST_TRANSITION_DISABLE_DESTROY_DEVICE] = "DISABLE (DESTROY DEVICE)",
 };
 
 const char * const mhi_ch_state_type_str[MHI_CH_STATE_TYPE_MAX] = {
diff --git a/drivers/bus/mhi/host/internal.h b/drivers/bus/mhi/host/internal.h
index 30ac415a3000..3f45c9c447bd 100644
--- a/drivers/bus/mhi/host/internal.h
+++ b/drivers/bus/mhi/host/internal.h
@@ -69,6 +69,7 @@ enum dev_st_transition {
 	DEV_ST_TRANSITION_FP,
 	DEV_ST_TRANSITION_SYS_ERR,
 	DEV_ST_TRANSITION_DISABLE,
+	DEV_ST_TRANSITION_DISABLE_DESTROY_DEVICE,
 	DEV_ST_TRANSITION_MAX,
 };
 
diff --git a/drivers/bus/mhi/host/pm.c b/drivers/bus/mhi/host/pm.c
index a2f2feef1476..8833b0248393 100644
--- a/drivers/bus/mhi/host/pm.c
+++ b/drivers/bus/mhi/host/pm.c
@@ -458,7 +458,8 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 }
 
 /* Handle shutdown transitions */
-static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
+static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
+				      bool destroy_device)
 {
 	enum mhi_pm_state cur_state;
 	struct mhi_event *mhi_event;
@@ -520,8 +521,10 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
 	dev_dbg(dev, "Waiting for all pending threads to complete\n");
 	wake_up_all(&mhi_cntrl->state_event);
 
-	dev_dbg(dev, "Reset all active channels and remove MHI devices\n");
-	device_for_each_child(&mhi_cntrl->mhi_dev->dev, NULL, mhi_destroy_device);
+	if (destroy_device) {
+		dev_dbg(dev, "Reset all active channels and remove MHI devices\n");
+		device_for_each_child(&mhi_cntrl->mhi_dev->dev, NULL, mhi_destroy_device);
+	}
 
 	mutex_lock(&mhi_cntrl->pm_mutex);
 
@@ -806,7 +809,10 @@ void mhi_pm_st_worker(struct work_struct *work)
 			mhi_pm_sys_error_transition(mhi_cntrl);
 			break;
 		case DEV_ST_TRANSITION_DISABLE:
-			mhi_pm_disable_transition(mhi_cntrl);
+			mhi_pm_disable_transition(mhi_cntrl, false);
+			break;
+		case DEV_ST_TRANSITION_DISABLE_DESTROY_DEVICE:
+			mhi_pm_disable_transition(mhi_cntrl, true);
 			break;
 		default:
 			break;
@@ -1160,7 +1166,8 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 }
 EXPORT_SYMBOL_GPL(mhi_async_power_up);
 
-void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
+void __mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful,
+		      bool destroy_device)
 {
 	enum mhi_pm_state cur_state, transition_state;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
@@ -1196,14 +1203,19 @@ void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
 	write_unlock_irq(&mhi_cntrl->pm_lock);
 	mutex_unlock(&mhi_cntrl->pm_mutex);
 
-	mhi_queue_state_transition(mhi_cntrl, DEV_ST_TRANSITION_DISABLE);
+	if (destroy_device)
+		mhi_queue_state_transition(mhi_cntrl,
+					   DEV_ST_TRANSITION_DISABLE_DESTROY_DEVICE);
+	else
+		mhi_queue_state_transition(mhi_cntrl,
+					   DEV_ST_TRANSITION_DISABLE);
 
 	/* Wait for shutdown to complete */
 	flush_work(&mhi_cntrl->st_worker);
 
 	disable_irq(mhi_cntrl->irq[0]);
 }
-EXPORT_SYMBOL_GPL(mhi_power_down);
+EXPORT_SYMBOL_GPL(__mhi_power_down);
 
 int mhi_sync_power_up(struct mhi_controller *mhi_cntrl)
 {
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index d0f9b522f328..ae092bc8b97e 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -648,12 +648,37 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl);
  */
 int mhi_sync_power_up(struct mhi_controller *mhi_cntrl);
 
+void __mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful,
+		    bool destroy_device);
+
 /**
- * mhi_power_down - Start MHI power down sequence
+ * mhi_power_down - Start MHI power down sequence. See also
+ * mhi_power_down_no_destroy() which is a variant of this for suspend.
+ *
  * @mhi_cntrl: MHI controller
  * @graceful: Link is still accessible, so do a graceful shutdown process
  */
-void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful);
+static inline void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
+{
+	__mhi_power_down(mhi_cntrl, graceful, true);
+}
+
+/**
+ * mhi_power_down_no_destroy - Start MHI power down sequence but don't
+ * destroy struct devices. This is a variant for mhi_power_down() and is a
+ * workaround to make it possible to use mhi_power_up() in a resume
+ * handler. When using this variant the caller must also call
+ * mhi_prepare_all_for_transfer_autoqueue() and
+ * mhi_unprepare_all_from_transfer().
+ *
+ * @mhi_cntrl: MHI controller
+ * @graceful: Link is still accessible, so do a graceful shutdown process
+ */
+static inline void mhi_power_down_no_destroy(struct mhi_controller *mhi_cntrl,
+					     bool graceful)
+{
+	__mhi_power_down(mhi_cntrl, graceful, false);
+}
 
 /**
  * mhi_unprepare_after_power_down - Free any allocated memory after power down
-- 
2.39.2


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  reply	other threads:[~2023-11-27 16:20 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-27 16:20 [PATCH RFC v2 0/8] wifi: ath11k: hibernation support Kalle Valo
2023-11-27 16:20 ` Kalle Valo [this message]
2023-11-30  5:42   ` [PATCH RFC v2 1/8] bus: mhi: host: add mhi_power_down_no_destroy() Manivannan Sadhasivam
2023-12-01  1:08     ` Baochen Qiang
2023-12-05 12:29     ` Kalle Valo
2023-12-18 16:19       ` Jeff Johnson
2023-12-20 16:32       ` Manivannan Sadhasivam
2023-12-20 16:51         ` Manivannan Sadhasivam
2023-12-21 11:05           ` Baochen Qiang
2024-01-04  6:09             ` Manivannan Sadhasivam
2024-01-22  6:24               ` Manivannan Sadhasivam
2024-01-22  8:09                 ` Baochen Qiang
2024-01-22 13:09                   ` Manivannan Sadhasivam
2024-01-23  1:44                     ` Baochen Qiang
2024-01-23 15:36                       ` Manivannan Sadhasivam
2024-01-23 16:53                         ` Jeff Johnson
2024-01-30 18:04   ` Manivannan Sadhasivam
2024-01-31 10:51     ` Baochen Qiang
2023-11-27 16:20 ` [PATCH RFC v2 2/8] bus: mhi: host: add new interfaces to handle MHI channels directly Kalle Valo
2024-01-30 18:19   ` Manivannan Sadhasivam
2024-01-31  7:39     ` Baochen Qiang
2024-02-01 10:00       ` Manivannan Sadhasivam
2024-02-02  6:42         ` Baochen Qiang
2024-02-02  7:10           ` Manivannan Sadhasivam
2024-02-02 10:49             ` Baochen Qiang
2024-02-02 12:16               ` Manivannan Sadhasivam
2023-11-27 16:20 ` [PATCH RFC v2 3/8] wifi: ath11k: handle irq enable/disable in several code path Kalle Valo
2023-11-27 16:20 ` [PATCH RFC v2 4/8] wifi: ath11k: remove MHI LOOPBACK channels Kalle Valo
2023-11-28  1:13   ` Baochen Qiang
2023-11-27 16:20 ` [PATCH RFC v2 5/8] wifi: ath11k: do not dump SRNG statistics during resume Kalle Valo
2023-11-27 16:20 ` [PATCH RFC v2 6/8] wifi: ath11k: fix warning on DMA ring capabilities event Kalle Valo
2023-11-27 16:20 ` [PATCH RFC v2 7/8] wifi: ath11k: thermal: don't try to register multiple times Kalle Valo
2023-11-27 16:20 ` [PATCH RFC v2 8/8] wifi: ath11k: support hibernation Kalle Valo
2023-11-27 18:49 ` [PATCH RFC v2 0/8] wifi: ath11k: hibernation support Jeff Johnson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231127162022.518834-2-kvalo@kernel.org \
    --to=kvalo@kernel.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mhi@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox