From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from z5.mailgun.us ([104.130.96.5]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kaLj3-0004eG-O0 for ath11k@lists.infradead.org; Wed, 04 Nov 2020 16:33:35 +0000 From: Kalle Valo Subject: Re: ath11k: QCA6390 support on Linux References: <87r1r4nukq.fsf@codeaurora.org> Date: Wed, 04 Nov 2020 18:33:28 +0200 In-Reply-To: <87r1r4nukq.fsf@codeaurora.org> (Kalle Valo's message of "Mon, 14 Sep 2020 20:20:53 +0300") Message-ID: <87mtzxqdyf.fsf@codeaurora.org> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath11k" Errors-To: ath11k-bounces+kvalo=adurom.com@lists.infradead.org To: ath11k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org Kalle Valo writes: > some of the Dell XPS 15 9500 models have QCA6390 Wi-Fi 6 device. ath11k > will be the driver to support QCA6390 and the plan is that Linux v5.10 > (most likely released end of December) will be the first release to > support it. > > But as everything is not ready yet I recommend people to test > ath11k-qca6390-bringup branch, and specifically tag > ath11k-qca6390-bringup-202008181507. Below are instructions how to > install kernel and firmware. > > Do note that this is still experimental, there will be bugs but at least > it should be possible to connect to an AP and have connectivity. > > Please send all questions, comments and bug reports to > ath11k@lists.infradead.org list. I do not have time to reply to private > email. I have Bcced people who have contacted me privately. Some updates: * QCA6390 support is now in v5.10-rc2 * pull request to linux-firmware sent, not yet pulled * board-2.bin should be now used instead of board.bin * there was some reorganisation in ath11k-firmware Here are updated instructions on how to test ath11k: # clone kernel git clone -b v5.10-rc2 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # clone firmware git clone https://github.com/kvalo/ath11k-firmware.git # Ensure below options are selected in the kernel cd linux make menuconfig --> Select Device drivers --> Network device support --> Wireless LAN --> Enable as below Qualcomm Technologies 11ax chipset support Atheros ath11k PCI support [*] QCA ath11k debugging [*] QCA ath11k debugfs support [*] ath11k tracing support [*] QCA ath11k spectral scan support # Build and install the kernel and kernel modules # Install firmware cd ../ath11k-firmware sudo mkdir -p /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/1.0.1/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/*.bin /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/board-2.bin /lib/firmware/ath11k/QCA6390/hw2.0/ -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k