Re: Can not unload ath11k_pci and load it back

[Mark Herbert <mark.herbert42@gmail.com>]

Created the bug for hibernate issue. For me it looks very close to the 
modules unloading - Archlinux wiki provides module unloading before 
/loading after as a workaround. And in fact there are a lot of hardware 
pieces that need to be reinitialized  after resume, so it is a kind of 
common workaround.


https://bugzilla.kernel.org/show_bug.cgi?id=214649


By the way the card gives a lot of trouble not only for Linux users but 
even in Windows, and Dell has issued several driver updates (latest 
dated 23 of September).  Just windering if Dell also uses same firmware 
12 month old or they have some bugfixes in the firmware itself...

On 07.10.2021 10:48, Kalle Valo wrote:
> Mark Herbert <mark.herbert42@gmail.com> writes:
>
>> I've found similar bug files already - so not to create duplicates
>> simply commented there
>>
>> https://bugzilla.kernel.org/show_bug.cgi?id=214541
>>
>> Exactly - hibernation means saving state on disk and resuming later,
>> it is a very usefull feature when you are running out of battery and
>> want to save your work.
> Got it, thanks. So it seems we have two issues here: ath11k does not
> support hibernation and ath11k module reload failing. Let's handle the
> module reload failing in bug #214541, but can you file another bug about
> the missing support for hibernation? Let's have one issue per bug
> report, it's easier to manage bugzilla that way.
>
>> Also one more point I've found - if MHI is configured in the kernel -
>> the card is starting up on thr first boot and works. But if i
>> configure MHI as a module - it does not. MHI module do load. So do
>> ath11k and ath11k_pci.  But the last ath11k dmesg says :
>>
>> mhi mhi0: Wait for device to enter SBL or Mission mode
>>
>> Exactly as if I  do rmmod/modprobe sequence.
>>
>> I use latest BIOS from Dell (in fact upgrading 3.0.4 to 3.1.0 did not
>> cange anythng) ,  and have tried multiple kernels. Stable 5.14 series
>> and ath11k git tree (next and master-pending). Nothing helps.
>> Sometimes it woks out - I had couple of times successfully
>> rmmod/modprobe ath11k_pci but it s a kind of random and very rare
>> event ( I had it 2 times only).
>>
>> So for me it looks like an issue between MHI and ath11k , but
>> ubfortunately my knowledge is not enough to propose any solution here.
> On my NUC x86 test box I reload ath11k modules several times a day while
> I test ath11k but I always reload the mhi modules at the same time,
> maybe that makes the difference? Or XPS 13 9310 works differently from
> NUC, that's also possible.
>

-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k