From: Nicolas Escande <nico.escande@gmail.com>
To: ath12k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 2/2] wifi: ath12k: Remove unused scan_flags from struct ath12k_wmi_scan_req_arg
Date: Sun, 11 Feb 2024 15:55:48 +0100 [thread overview]
Message-ID: <20240211145548.1939610-3-nico.escande@gmail.com> (raw)
In-Reply-To: <20240211145548.1939610-1-nico.escande@gmail.com>
As we did for ath11k lets remove the unused scan_flags from struct
ath12k_wmi_scan_req_arg. This will prevent us from using out of sync values
between WMI_SCAN_XXX & scan_f_xxx bitfield.
While at it remove the underlying wrapping struct/union construct as it serves
no purpose anymore.
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
---
drivers/net/wireless/ath/ath12k/wmi.h | 55 ++++++++++++---------------
1 file changed, 25 insertions(+), 30 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 4bd1d0f270a1..892f21f95ee5 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -3311,36 +3311,31 @@ struct ath12k_wmi_scan_req_arg {
u32 idle_time;
u32 max_scan_time;
u32 probe_delay;
- union {
- struct {
- u32 scan_f_passive:1,
- scan_f_bcast_probe:1,
- scan_f_cck_rates:1,
- scan_f_ofdm_rates:1,
- scan_f_chan_stat_evnt:1,
- scan_f_filter_prb_req:1,
- scan_f_bypass_dfs_chn:1,
- scan_f_continue_on_err:1,
- scan_f_offchan_mgmt_tx:1,
- scan_f_offchan_data_tx:1,
- scan_f_promisc_mode:1,
- scan_f_capture_phy_err:1,
- scan_f_strict_passive_pch:1,
- scan_f_half_rate:1,
- scan_f_quarter_rate:1,
- scan_f_force_active_dfs_chn:1,
- scan_f_add_tpc_ie_in_probe:1,
- scan_f_add_ds_ie_in_probe:1,
- scan_f_add_spoofed_mac_in_probe:1,
- scan_f_add_rand_seq_in_probe:1,
- scan_f_en_ie_whitelist_in_probe:1,
- scan_f_forced:1,
- scan_f_2ghz:1,
- scan_f_5ghz:1,
- scan_f_80mhz:1;
- };
- u32 scan_flags;
- };
+ u32 scan_f_passive:1,
+ scan_f_bcast_probe:1,
+ scan_f_cck_rates:1,
+ scan_f_ofdm_rates:1,
+ scan_f_chan_stat_evnt:1,
+ scan_f_filter_prb_req:1,
+ scan_f_bypass_dfs_chn:1,
+ scan_f_continue_on_err:1,
+ scan_f_offchan_mgmt_tx:1,
+ scan_f_offchan_data_tx:1,
+ scan_f_promisc_mode:1,
+ scan_f_capture_phy_err:1,
+ scan_f_strict_passive_pch:1,
+ scan_f_half_rate:1,
+ scan_f_quarter_rate:1,
+ scan_f_force_active_dfs_chn:1,
+ scan_f_add_tpc_ie_in_probe:1,
+ scan_f_add_ds_ie_in_probe:1,
+ scan_f_add_spoofed_mac_in_probe:1,
+ scan_f_add_rand_seq_in_probe:1,
+ scan_f_en_ie_whitelist_in_probe:1,
+ scan_f_forced:1,
+ scan_f_2ghz:1,
+ scan_f_5ghz:1,
+ scan_f_80mhz:1;
enum scan_dwelltime_adaptive_mode adaptive_dwell_time_mode;
u32 burst_duration;
u32 num_chan;
--
2.43.0
next prev parent reply other threads:[~2024-02-11 14:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-11 14:55 [PATCH 0/2] CLeanup scan_flags from struct ath12k_wmi_scan_req_arg Nicolas Escande
2024-02-11 14:55 ` [PATCH 1/2] wifi: ath12k: Do not use " Nicolas Escande
2024-02-12 18:50 ` Jeff Johnson
2024-02-14 8:17 ` Kalle Valo
2024-02-11 14:55 ` Nicolas Escande [this message]
2024-02-12 18:50 ` [PATCH 2/2] wifi: ath12k: Remove unused " Jeff Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240211145548.1939610-3-nico.escande@gmail.com \
--to=nico.escande@gmail.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox