From: Kang Yang <kang.yang@oss.qualcomm.com>
To: ath12k@lists.infradead.org, kang.yang@oss.qualcomm.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH ath-next 3/3] wifi: ath12k: fix the fetching of combined rssi
Date: Tue, 22 Jul 2025 17:59:34 +0800 [thread overview]
Message-ID: <20250722095934.67-4-kang.yang@oss.qualcomm.com> (raw)
In-Reply-To: <20250722095934.67-1-kang.yang@oss.qualcomm.com>
Currently, host fetches combined rssi from rssi_comb in struct
hal_rx_phyrx_rssi_legacy_info.
rssi_comb is 8th to 15th bits of the second to last variable.
rssi_comb_ppdu is the 0th to 7th of the last variable.
When bandwidth = 20MHz, rssi_comb = rssi_comb_ppdu. But when bandwidth >
20MHz, rssi_comb < rssi_comb_ppdu because rssi_comb only includes power
of primary 20 MHz while rssi_comb_ppdu includes power of active
RUs/subchannels. So should fetch combined rssi from rssi_comb_ppdu.
Also related macro definitions are too long, rename them.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
---
drivers/net/wireless/ath/ath12k/dp_mon.c | 8 ++++----
drivers/net/wireless/ath/ath12k/hal_rx.h | 9 +++++----
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/dp_mon.c b/drivers/net/wireless/ath/ath12k/dp_mon.c
index e93ede5e6197..abd611ac37f0 100644
--- a/drivers/net/wireless/ath/ath12k/dp_mon.c
+++ b/drivers/net/wireless/ath/ath12k/dp_mon.c
@@ -1655,18 +1655,18 @@ ath12k_dp_mon_rx_parse_status_tlv(struct ath12k *ar,
const struct hal_rx_phyrx_rssi_legacy_info *rssi = tlv_data;
info[0] = __le32_to_cpu(rssi->info0);
- info[1] = __le32_to_cpu(rssi->info1);
+ info[2] = __le32_to_cpu(rssi->info2);
/* TODO: Please note that the combined rssi will not be accurate
* in MU case. Rssi in MU needs to be retrieved from
* PHYRX_OTHER_RECEIVE_INFO TLV.
*/
ppdu_info->rssi_comb =
- u32_get_bits(info[1],
- HAL_RX_PHYRX_RSSI_LEGACY_INFO_INFO1_RSSI_COMB);
+ u32_get_bits(info[2],
+ HAL_RX_RSSI_LEGACY_INFO_INFO2_RSSI_COMB_PPDU);
ppdu_info->bw = u32_get_bits(info[0],
- HAL_RX_PHYRX_RSSI_LEGACY_INFO_INFO0_RX_BW);
+ HAL_RX_RSSI_LEGACY_INFO_INFO0_RX_BW);
break;
}
case HAL_PHYRX_COMMON_USER_INFO: {
diff --git a/drivers/net/wireless/ath/ath12k/hal_rx.h b/drivers/net/wireless/ath/ath12k/hal_rx.h
index 801a5f6d3458..d1ad7747b82c 100644
--- a/drivers/net/wireless/ath/ath12k/hal_rx.h
+++ b/drivers/net/wireless/ath/ath12k/hal_rx.h
@@ -483,15 +483,16 @@ enum hal_rx_ul_reception_type {
HAL_RECEPTION_TYPE_FRAMELESS
};
-#define HAL_RX_PHYRX_RSSI_LEGACY_INFO_INFO0_RECEPTION GENMASK(3, 0)
-#define HAL_RX_PHYRX_RSSI_LEGACY_INFO_INFO0_RX_BW GENMASK(7, 5)
-#define HAL_RX_PHYRX_RSSI_LEGACY_INFO_INFO1_RSSI_COMB GENMASK(15, 8)
+#define HAL_RX_RSSI_LEGACY_INFO_INFO0_RECEPTION GENMASK(3, 0)
+#define HAL_RX_RSSI_LEGACY_INFO_INFO0_RX_BW GENMASK(7, 5)
+#define HAL_RX_RSSI_LEGACY_INFO_INFO1_RSSI_COMB GENMASK(15, 8)
+#define HAL_RX_RSSI_LEGACY_INFO_INFO2_RSSI_COMB_PPDU GENMASK(7, 0)
struct hal_rx_phyrx_rssi_legacy_info {
__le32 info0;
__le32 rsvd0[39];
__le32 info1;
- __le32 rsvd1;
+ __le32 info2;
} __packed;
#define HAL_RX_MPDU_START_INFO0_PPDU_ID GENMASK(31, 16)
--
2.34.1
next prev parent reply other threads:[~2025-07-22 10:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-22 9:59 [PATCH ath-next 0/3] wifi: ath12k: monitor mode fixes Kang Yang
2025-07-22 9:59 ` [PATCH ath-next 1/3] wifi: ath12k: fix signal in radiotap for WCN7850 Kang Yang
2025-07-22 9:59 ` [PATCH ath-next 2/3] wifi: ath12k: fix HAL_PHYRX_COMMON_USER_INFO handling in monitor mode Kang Yang
2025-07-22 9:59 ` Kang Yang [this message]
2025-07-24 14:44 ` [PATCH ath-next 0/3] wifi: ath12k: monitor mode fixes Vasanthakumar Thiagarajan
2025-09-17 2:33 ` Baochen Qiang
2025-09-18 23:47 ` Jeff Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250722095934.67-4-kang.yang@oss.qualcomm.com \
--to=kang.yang@oss.qualcomm.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox