mirror of https://lore.kernel.org/ath12k/
 help / color / mirror / Atom feed
From: Sebastian Gottschall <s.gottschall@dd-wrt.com>
To: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Cc: Jeff Johnson <jjohnson@kernel.org>,
	ath12k@lists.infradead.org, linux-wireless@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: ath12k: REO status on PPC does not work
Date: Fri, 15 Aug 2025 12:50:00 +0200	[thread overview]
Message-ID: <5ce28473-0fab-4fbe-9668-0042ff7d86c4@dd-wrt.com> (raw)
In-Reply-To: <aJ8LYj+NGaX8cwge@FUE-ALEWI-WINX>

i just can say. the changes i had to make for ath11k to get big endian 
somwhat working where massive. alot of endian handling in ath11k is 
simply not considered. the firmware is little endian and alot of fields 
must be converted to host endian order. but at end end i struggled with 
dma transactions and gave up since it was not resolvable. the patch i 
made for ath11k was massive at the end and ath12k is not much different
technically ath11k and ath12k can be merged at the end. i dont know why 
there are 2 drivers maintained which are technically very similar at the 
end. alot of patches for ath12k can be applied to ath11k which i do 
sometimes if its a usefull patch. but ath11k itself is abadoned for 
maintainance as it seems (at least if you look for qualcomm supplied 
patches)

Am 15.08.2025 um 12:26 schrieb Alexander Wilhelm:
> Am Fri, Aug 15, 2025 at 11:55:14AM +0200 schrieb Sebastian Gottschall:
>> i played already with big endian platforms and ath11k (not ath12k) for
>> months. there is also a problem with the dma descriptors. the firmware
>> simply doesnt support big endian with host communication at the end even if
>> there is a endian flag for the firmware.  dont get into this rabit hole. (i
>> worked 3 months on it and gave up)
>> at the end (i was working on a cavium octeon platform at that time) i just
>> switched the kernel boot to little endian which is possible on many ppc
>> platforms too.
> The 'ath11k' driver works a bit differently. The endian swap is implemented in
> the firmware and was never properly tested. My investigations show that the
> firmware does not handle the swap consistently. According to 'kvalo', different
> firmware versions treat the swap differently. See [1].
>
> With 'ath12k', the situation looks better. Unfortunately, there are still some
> memcpys from u32 to u8 or similar. Also, reading from DMA memory is not swapped.
> I already have ath12k running, I get ping responses and can transmit data.
> However, not in all modes, and there are still some bugs I’m trying to iron out.
>
>
> Best regards
> Alexander Wilhelm
>
> ---
> [1] https://lore.kernel.org/ath11k/68290980-5bfb-c88c-be78-954f9591c135@westermo.com/T/#u
>


  reply	other threads:[~2025-08-15 13:26 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-15  8:13 ath12k: REO status on PPC does not work Alexander Wilhelm
2025-08-15  9:55 ` Sebastian Gottschall
2025-08-15 10:26   ` Alexander Wilhelm
2025-08-15 10:50     ` Sebastian Gottschall [this message]
2025-08-15 12:00       ` Alexander Wilhelm
2025-08-19  6:38 ` Baochen Qiang
2025-08-19  6:59   ` Alexander Wilhelm
2025-08-19  7:26     ` Baochen Qiang
2025-08-19  8:10       ` Alexander Wilhelm
2025-08-19  9:21         ` Vasanthakumar Thiagarajan
2025-08-21  6:54           ` Alexander Wilhelm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5ce28473-0fab-4fbe-9668-0042ff7d86c4@dd-wrt.com \
    --to=s.gottschall@dd-wrt.com \
    --cc=alexander.wilhelm@westermo.com \
    --cc=ath12k@lists.infradead.org \
    --cc=jjohnson@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox