RE: QCN9274 - x64 - AMD or Intel

david Atkins
2024-04-28T12:50:33Z

> -----Original Message-----
> From: Jeff Johnson <quic_jjohnson@quicinc.com>
> Sent: Wednesday, April 10, 2024 8:02 PM
> To: david Atkins <david@3adesign.co.uk>; ath12k@lists.infradead.org
> Subject: Re: QCN9274 - x64 - AMD or Intel
>
> On 4/10/2024 9:57 AM, Jeff Johnson wrote:
> > On 4/10/2024 7:52 AM, david Atkins wrote:
> >>
> >> I just built the ath-next branch for my AMD Ryzen 3 4300U system with
> >> an 8devices QCN9274 module, it appears to have a new message
> >>
> >> memory type 10 not supported
> >>
> >> in the dmesg logs
> >>
> >> [    2.705656] ath12k_pci 0000:03:00.0: BAR 0 [mem
> >> 0xfe200000-0xfe3fffff 64bit]: assigned [    2.705672] ath12k_pci
> >> 0000:03:00.0: enabling device (0000 -> 0002) [    2.705885]
> >> ath12k_pci 0000:03:00.0: MSI vectors: 16 [    2.705889] ath12k_pci
> >> 0000:03:00.0: Hardware name: qcn9274 hw2.0 [    3.405328] ath12k_pci
> >> 0000:03:00.0: memory type 10 not supported [    3.410796] ath12k_pci
> >> 0000:03:00.0: chip_id 0x0 chip_family 0xb board_id 0xc soc_id
> >> 0x401a2200 [    3.410804] ath12k_pci 0000:03:00.0: fw_version
> >> 0x1011001d fw_build_timestamp 2022-12-02 01:16 fw_build_id
> >> QC_IMAGE_VERSION_STRING=WLAN.WBE.1.0.1-00029-
> QCAHKSWPL_SILICONZ-1
> >> [    3.431347] ath12k_pci 0000:03:00.0: failed to fetch board data
> >> for bus=pci,qmi-chip-id=0,qmi-board-id=12 from
> >> ath12k/QCN9274/hw2.0/board-2.bin [    3.431375] ath12k_pci
> 0000:03:00.0: failed to fetch board.bin from QCN9274/hw2.0 [    3.431386]
> ath12k_pci 0000:03:00.0: qmi failed to load bdf:
> >> [    3.431387] ath12k_pci 0000:03:00.0: qmi failed to load board data
> >> file:-2
> >>
> >> I'll try on my other test bed systems, but is it expected that this will get
> further than this ?
> >
> > I believe the memory type 10 message can be ignored (I've received
> > conflicting information on that)
> >
> > You need to get the board file in place. Please grab the one at:
> > https://git.codelinaro.org/clo/ath-firmware/ath12k-firmware/-/blob/mai
> > n/QCN9274/hw2.0/board-2.bin
> >
> > And place it in <firmware>/ath12k/QCN9274/hw2.0/
>
> Based upon further information it seems your card is advertising a board_id
> that our default board file may not support, so you should contact 8devices to
> see if they have a customized board file for that device.
>
> /jeff

Got updated firmware from 8devices, it is not working but does now show up as a wlp device

$ sudo dmesg | grep ath12
[ 2.620901] ath12k_pci 0000:03:00.0: BAR 0 [mem 0xfe200000-0xfe3fffff 64bit]: assigned
[ 2.620918] ath12k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 2.621139] ath12k_pci 0000:03:00.0: MSI vectors: 16
[ 2.621142] ath12k_pci 0000:03:00.0: Hardware name: qcn9274 hw2.0
[ 3.387645] ath12k_pci 0000:03:00.0: memory type 10 not supported
[ 3.392254] ath12k_pci 0000:03:00.0: chip_id 0x0 chip_family 0xb board_id 0xc soc_id 0x401a2200
[ 3.392260] ath12k_pci 0000:03:00.0: fw_version 0x11010cf9 fw_build_timestamp 2024-02-02 07:43 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.WBE.1.1-03321-QCAHKSWPL_SILICONZ-1
[ 6.164203] ath12k_pci 0000:03:00.0: HTC Service WMI MAC1 connect request failed: 0x1)
[ 6.164227] ath12k_pci 0000:03:00.0: failed to connect to WMI CONTROL service status: -71
[ 6.164748] ath12k_pci 0000:03:00.0: Invalid module id 2
[ 6.164753] ath12k_pci 0000:03:00.0: failed to parse tlv -22
[ 6.472567] ath12k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 8.584409] ath12k_pci 0000:03:00.0: firmware crashed: MHI_CB_SYS_ERROR
[ 18.395177] ath12k_pci 0000:03:00.0: failed to send WMI_STOP_SCAN_CMDID
[ 18.395185] ath12k_pci 0000:03:00.0: failed to stop wmi scan: -108
[ 18.395194] ath12k_pci 0000:03:00.0: failed to abort scan: -108
[ 18.619059] ath12k_pci 0000:03:00.0: failed to send WMI_START_SCAN_CMDID
[ 18.619070] ath12k_pci 0000:03:00.0: failed to start hw scan: -108
[ 23.001923] ath12k_pci 0000:03:00.0: failed to send WMI_START_SCAN_CMDID
[ 23.001934] ath12k_pci 0000:03:00.0: failed to start hw scan: -108
[ 30.002943] ath12k_pci 0000:03:00.0: failed to send WMI_START_SCAN_CMDID
[ 30.002954] ath12k_pci 0000:03:00.0: failed to start hw scan: -108
[ 40.003342] ath12k_pci 0000:03:00.0: failed to send WMI_START_SCAN_CMDID
[ 40.003354] ath12k_pci 0000:03:00.0: failed to start hw scan: -108
[ 54.002922] ath12k_pci 0000:03:00.0: failed to send WMI_START_SCAN_CMDID
[ 54.002932] ath12k_pci 0000:03:00.0: failed to start hw scan: -108
[ 74.002086] ath12k_pci 0000:03:00.0: failed to send WMI_START_SCAN_CMDID

Ip a results

4: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether c4:93:00:4c:cd:14 brd ff:ff:ff:ff:ff:ff

nmcli

wlp3s0: disconnected
"Qualcomm Renoir/Cezanne GPP Bridge"
wifi (ath12k_pci), C4:93:00:4C:CD:14, hw, mtu 1500

david