From: Jeff Johnson <quic_jjohnson@quicinc.com>
To: Sriram R <quic_srirrama@quicinc.com>, <ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH 10/12] wifi: ath12k: Modify set and get antenna mac ops for single wiphy
Date: Fri, 12 Jan 2024 10:25:29 -0800 [thread overview]
Message-ID: <bfdf62da-e2f3-4b59-971c-e10349e705f6@quicinc.com> (raw)
In-Reply-To: <20240111045045.28377-11-quic_srirrama@quicinc.com>
On 1/10/2024 8:50 PM, Sriram R wrote:
> As multiple radios are combined into a single wiphy, and
> the current infrastructure supports only set/get antenna
> for the wiphy, the max Tx/Rx antenna capability is advertised
> during wiphy register.
> Hence, When antenna set/get is received we adjust the set/get
> based on max radio capability and set/get antenna accordingly.
>
> Multi radio capability would get introduced with interface
Since this multi-radio capability is not part of the current series, I
don't think it is correct to say this "would get introduced". Rather, I
think it is more appropriate to say it "would need to be introduced in
the future" if you want per-radio configuration
> combination changes to support single wiphy model in cfg80211
> which would help extend the wiphy specific get/set configs similar
> to this to per hw level.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
>
> Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
> ---
> drivers/net/wireless/ath/ath12k/mac.c | 41 +++++++++++++++++++--------
> 1 file changed, 29 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
> index 2f19d6c5b741..00063c783e6c 100644
> --- a/drivers/net/wireless/ath/ath12k/mac.c
> +++ b/drivers/net/wireless/ath/ath12k/mac.c
> @@ -5064,6 +5064,13 @@ static int __ath12k_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
> if (ath12k_check_chain_mask(ar, rx_ant, false))
> return -EINVAL;
>
> + /* Since we advertised the max cap of all radios combined during wiphy
> + * registration, ensure we don't set the antenna config higher than our
> + * limits
*specific radio* limits
> + */
> + tx_ant = min_t(u32, tx_ant, ar->pdev->cap.tx_chain_mask);
> + rx_ant = min_t(u32, rx_ant, ar->pdev->cap.rx_chain_mask);
> +
> ar->cfg_tx_chainmask = tx_ant;
> ar->cfg_rx_chainmask = rx_ant;
>
> @@ -6380,21 +6387,25 @@ static void ath12k_mac_op_configure_filter(struct ieee80211_hw *hw,
> static int ath12k_mac_op_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
> {
> struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
> + int antennas_rx = 0, antennas_tx = 0;
> struct ath12k *ar;
> + int i;
>
> mutex_lock(&ah->conf_mutex);
>
> ar = ath12k_ah_to_ar(ah, 0);
>
> - mutex_lock(&ar->conf_mutex);
> -
> - *tx_ant = ar->cfg_tx_chainmask;
> - *rx_ant = ar->cfg_rx_chainmask;
> -
> - mutex_unlock(&ar->conf_mutex);
> -
> + for (i = 0; i < ah->num_radio; i++) {
> + mutex_lock(&ar->conf_mutex);
> + antennas_rx = max_t(u32, antennas_rx, ar->cfg_rx_chainmask);
> + antennas_tx = max_t(u32, antennas_tx, ar->cfg_tx_chainmask);
> + mutex_unlock(&ar->conf_mutex);
> + ar++;
> + }
> mutex_unlock(&ah->conf_mutex);
>
> + *tx_ant = antennas_rx;
> + *rx_ant = antennas_tx;
> return 0;
> }
>
> @@ -6402,16 +6413,22 @@ static int ath12k_mac_op_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx
> {
> struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
> struct ath12k *ar;
> - int ret;
> + int ret = 0;
> + int i;
>
> mutex_lock(&ah->conf_mutex);
>
> ar = ath12k_ah_to_ar(ah, 0);
>
> - mutex_lock(&ar->conf_mutex);
> - ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
> - mutex_unlock(&ar->conf_mutex);
> -
> + for (i = 0; i < ah->num_radio; i++) {
> + mutex_lock(&ar->conf_mutex);
> + ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
> + mutex_unlock(&ar->conf_mutex);
> + if (ret)
> + goto out;
> + ar++;
> + }
> +out:
> mutex_unlock(&ah->conf_mutex);
>
> return ret;
Since I just have documentation nits:
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
next prev parent reply other threads:[~2024-01-12 18:25 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-11 4:50 [PATCH 00/12] wifi: ath12k: Add single wiphy support Sriram R
2024-01-11 4:50 ` [PATCH 01/12] wifi: ath12k: add multiple radio support in a single MAC HW un/register Sriram R
2024-01-12 15:11 ` Jeff Johnson
2024-01-12 17:03 ` Jeff Johnson
2024-01-16 4:45 ` Karthikeyan Periyasamy
2024-01-11 4:50 ` [PATCH 02/12] wifi: ath12k: Modify add and remove chanctx ops for single wiphy support Sriram R
2024-01-12 17:05 ` Jeff Johnson
2024-01-11 4:50 ` [PATCH 03/12] wifi: ath12k: modify ath12k mac start/stop ops for single wiphy Sriram R
2024-01-12 17:07 ` Jeff Johnson
2024-01-11 4:50 ` [PATCH 04/12] wifi: ath12k: vdev statemachine changes " Sriram R
2024-01-12 17:10 ` Jeff Johnson
2024-01-11 4:50 ` [PATCH 05/12] wifi: ath12k: scan " Sriram R
2024-01-12 17:13 ` Jeff Johnson
2024-01-11 4:50 ` [PATCH 06/12] wifi: ath12k: fetch correct radio based on vdev status Sriram R
2024-01-12 17:15 ` Jeff Johnson
2024-01-11 4:50 ` [PATCH 07/12] wifi: ath12k: Cache vdev configs before vdev create Sriram R
2024-01-12 17:23 ` Jeff Johnson
2024-01-13 9:44 ` Kalle Valo
2024-01-11 4:50 ` [PATCH 08/12] wifi: ath12k: Add additional checks for vif and sta iterators Sriram R
2024-01-12 17:26 ` Jeff Johnson
2024-01-11 4:50 ` [PATCH 09/12] wifi: ath12k: modify regulatory support for single wiphy architecture Sriram R
2024-01-12 18:15 ` Jeff Johnson
2024-01-15 7:53 ` Sriram R (QUIC)
2024-01-11 4:50 ` [PATCH 10/12] wifi: ath12k: Modify set and get antenna mac ops for single wiphy Sriram R
2024-01-12 18:25 ` Jeff Johnson [this message]
2024-01-11 4:50 ` [PATCH 11/12] wifi: ath12k: Modify rts threshold mac op " Sriram R
2024-01-12 18:26 ` Jeff Johnson
2024-01-11 4:50 ` [PATCH 12/12] wifi: ath12k: support get_survey " Sriram R
2024-01-12 18:26 ` Jeff Johnson
2024-01-11 20:16 ` [PATCH 00/12] wifi: ath12k: Add single wiphy support Jeff Johnson
2024-01-12 4:34 ` Sriram R (QUIC)
2024-01-12 16:44 ` Jeff Johnson
2024-01-12 18:30 ` Jeff Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bfdf62da-e2f3-4b59-971c-e10349e705f6@quicinc.com \
--to=quic_jjohnson@quicinc.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_srirrama@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox