From: Jeff Johnson <quic_jjohnson@quicinc.com>
To: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>,
<ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
Ganesh Babu Jothiram <quic_gjothira@quicinc.com>
Subject: Re: [PATCH v3 12/13] wifi: ath12k: Read board id to support split-PHY QCN9274
Date: Wed, 31 Jan 2024 13:09:05 -0800 [thread overview]
Message-ID: <f58ba655-66f7-4622-bb79-bddabf76f355@quicinc.com> (raw)
In-Reply-To: <20240129065724.2310207-13-quic_rajkbhag@quicinc.com>
On 1/28/2024 10:57 PM, Raj Kumar Bhagat wrote:
> From: Ganesh Babu Jothiram <quic_gjothira@quicinc.com>
>
> QCN9274 can support single-PHY or split-PHY architecture. Currently,
> only the single-PHY architecture is supported in ath12k.
>
> The split-PHY QCN9274 requires different AMSS firmware binary
> "amss_dualmac.bin".
>
> Hence, add support to read board id from OTP. Based on board id
> decide whether single-mac / dual-mac firmware needs to be downloaded
> to the target. Also, update HW param max_radios to support split-PHY
> in QCN9274.
>
> Also, add new Firmware IE for firmware_N.bin
> "ATH11K_FW_IE_AMSS_DUALMAC_IMAGE" to support dualmac QCN9274.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
>
> Signed-off-by: Ganesh Babu Jothiram <quic_gjothira@quicinc.com>
> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
next prev parent reply other threads:[~2024-01-31 21:09 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-29 6:57 [PATCH v3 00/13] wifi: ath12k: QCN9274 dualmac bring up Raj Kumar Bhagat
2024-01-29 6:57 ` [PATCH v3 01/13] wifi: ath12k: indicate NON MBSSID vdev by default during vdev start Raj Kumar Bhagat
2024-01-31 21:04 ` Jeff Johnson
2024-02-02 12:33 ` Kalle Valo
2024-01-29 6:57 ` [PATCH v3 02/13] wifi: ath12k: fetch correct pdev id from WMI_SERVICE_READY_EXT_EVENTID Raj Kumar Bhagat
2024-01-31 21:05 ` Jeff Johnson
2024-01-29 6:57 ` [PATCH v3 03/13] wifi: ath12k: add support for peer meta data version Raj Kumar Bhagat
2024-01-31 21:05 ` Jeff Johnson
2024-01-29 6:57 ` [PATCH v3 04/13] wifi: ath12k: fix fetching MCBC flag for QCN9274 Raj Kumar Bhagat
2024-01-31 21:06 ` Jeff Johnson
2024-01-29 6:57 ` [PATCH v3 05/13] wifi: ath12k: Add logic to write QRTR node id to scratch Raj Kumar Bhagat
2024-01-31 21:06 ` Jeff Johnson
2024-02-02 12:20 ` Kalle Valo
2024-02-02 14:32 ` Raj Kumar Bhagat
2024-01-29 6:57 ` [PATCH v3 06/13] wifi: ath12k: fix firmware assert during insmod in memory segment mode Raj Kumar Bhagat
2024-01-31 21:06 ` Jeff Johnson
2024-01-29 6:57 ` [PATCH v3 07/13] wifi: ath12k: split hal_ops to support RX TLVs word mask compaction Raj Kumar Bhagat
2024-01-31 21:07 ` Jeff Johnson
2024-01-29 6:57 ` [PATCH v3 08/13] wifi: ath12k: remove hal_desc_sz from hw params Raj Kumar Bhagat
2024-01-31 21:07 ` Jeff Johnson
2024-01-29 6:57 ` [PATCH v3 09/13] wifi: ath12k: subscribe required word mask from rx tlv Raj Kumar Bhagat
2024-01-31 21:07 ` Jeff Johnson
2024-02-02 12:27 ` Kalle Valo
2024-02-02 14:28 ` Raj Kumar Bhagat
2024-01-29 6:57 ` [PATCH v3 10/13] wifi: ath12k: add MAC id support in WBM error path Raj Kumar Bhagat
2024-01-31 21:08 ` Jeff Johnson
2024-01-29 6:57 ` [PATCH v3 11/13] wifi: ath12k: fix PCI read and write Raj Kumar Bhagat
2024-01-31 21:08 ` Jeff Johnson
2024-01-29 6:57 ` [PATCH v3 12/13] wifi: ath12k: Read board id to support split-PHY QCN9274 Raj Kumar Bhagat
2024-01-31 21:09 ` Jeff Johnson [this message]
2024-02-14 14:17 ` Sven Eckelmann
2024-02-15 11:32 ` Kalle Valo
2024-01-29 6:57 ` [PATCH v3 13/13] wifi: ath12k: disable QMI PHY capability learn in split-phy QCN9274 Raj Kumar Bhagat
2024-01-30 1:52 ` Jeff Johnson
2024-01-30 3:04 ` Raj Kumar Bhagat
2024-01-31 21:08 ` Jeff Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f58ba655-66f7-4622-bb79-bddabf76f355@quicinc.com \
--to=quic_jjohnson@quicinc.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_gjothira@quicinc.com \
--cc=quic_rajkbhag@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox