From: bing_chou <bing_chou@bandrich.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] about bit rate and wmm
Date: Fri, 31 May 2013 12:13:15 +0800 [thread overview]
Message-ID: <009f01ce5db5$2c442410$84cc6c30$@com> (raw)
Dear ath9k teams
Some questions , please everybody help me , thanks
1.Why does the client?s bit rate highest only show 54M (11g) , when I set
wmm_enabled=0
on the AP?is this normal status?
2. And if I set wmm_enabled=1 , the client?s bit rate can be running on 11n
mode , but no change to 11g or 11b mode and it will disconnect when I
increase the distance?
Chip is AR9341
The hostapd.conf below
root at OpenWrt:/# cat /var/run/hostapd-phy0.conf
ctrl_interface=/var/run/hostapd-phy0
driver=nl80211
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
hw_mode=g
channel=6
country_code=US
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
ieee80211n=1
ht_capab=[HT20][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-
40]
ieee80211d=1
interface=wlan0
ctrl_interface=/var/run/hostapd-phy0
disassoc_low_ack=1
preamble=1
auth_algs=1
wpa=0
ssid=OpenWrt_willis1
bridge=br-lan
wmm_enabled=0
bssid=00:03:7f:00:00:05
ignore_broadcast_ssid=0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130531/72651900/attachment.htm
reply other threads:[~2013-05-31 4:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='009f01ce5db5$2c442410$84cc6c30$@com' \
--to=bing_chou@bandrich.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox