From mboxrd@z Thu Jan 1 00:00:00 1970 From: sandeep suresh Date: Sun, 13 Apr 2014 23:05:37 +0800 (SGT) Subject: [ath9k-devel] Wifi client Bluetooth coexistence; non smooth video streams In-Reply-To: <1396668507.37072.YahooMailBasic@web193504.mail.sg3.yahoo.com> Message-ID: <1397401537.30203.YahooMailBasic@web193506.mail.sg3.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hello Mr.???, Thanks for your suggestions. This had an improvement on the video quality. Regards Sandeep. -------------------------------------------- On Sat, 5/4/14, sandeep suresh wrote: Subject: Re: [ath9k-devel] Wifi client Bluetooth coexistence; non smooth video streams To: "???" Cc: "ath9k-devel" , "linux-wireless at vger.kernel.org" Date: Saturday, 5 April, 2014, 8:58 AM Hello Mr.???, ? ? Thanks for your suggestions....will try and let u know the results. Regards Sandeep. -------------------------------------------- On Fri, 4/4/14, ??? wrote: Subject: RE: [ath9k-devel] Wifi client Bluetooth coexistence; non smooth video streams To: "sandeep suresh" Date: Friday, 4 April, 2014, 11:59 PM Hi?sandeep, I never used wifi just like you. So I only have some advices for you.1. Video needs more throughput, so 7:3 or 8:2 seams better.2. If you use RTSP to transmit video, I guess you can short the switch time to reduce the delay. Just try to set?period to 100ms or less for test. I think it will be better.? > Date: Fri, 4 Apr 2014 09:55:40 +0800 > From: sandeep.suresh at yahoo.co.in > To: adrian at freebsd.org; ath9k-devel at lists.ath9k.org; linux-wireless at vger.kernel.org > Subject: [ath9k-devel] Wifi client Bluetooth coexistence;??? non smooth video streams > > Dear all, >? ? Please help if any one have encountered simillar problems or other guidance on this, Please. > > The following is my set-up: > Linksys Access point. Cisco 802.11g camera connected as a wifi client to Linksys. I have a development board in which i have AR9287 as the Wifi chipset associated as wifi client to linksys. The development board has Bluetooth dongle for streaming audio etc. The development board has a LCD display and I stream the video stream from camera at 640 x 480 resolution, MPEG-4, 10fps (also tried with 15, 30 fps). > > Software: For the Wifi client on the development board, I am using the ath9k driver with btcoex_enable=1. > 2-wire coexistence. I am allowing 40% of the time for Bluetooth an 60% of the time for WiFi. The period is around 200ms. > > Observations: > 1. The video streams are not smooth. There will be a small pause of a second or two between frames and hence we do not see smooth transitions. > 2. Sometimes it looks like, the streams are bufferred and played back at a rapid pace. So, one can see like a fast forward play of video streams on the board. > 3. Disabling coexistence does not have these observations. > Please help. > Regards > Sandeep. > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel ? ??? ???????? ?????? ??? ? _______________________________________________ ath9k-devel mailing list ath9k-devel at lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel