[ath9k-devel] [added to the 4.1 stable tree] ath9k: Add a module parameter to invert LED polarity.

[ath9k-devel] [added to the 4.1 stable tree] ath9k: Add a module parameter to invert LED polarity.

[Sasha Levin]

From: "Vittorio Gambaletta (VittGam)" <linux-wireless@vittgam.net>

This patch has been added to the 4.1 stable tree. If you have any
objections, please let us know.

===============

[ Upstream commit cd84042ce9040ad038e958bc67a46fcfc015c736 ]

The LED can be active high instead of active low on some hardware.

Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.

Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.

Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
---
 drivers/net/wireless/ath/ath9k/init.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 46a389c..b7b0254 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int ath9k_led_blink;
 module_param_named(blink, ath9k_led_blink, int, 0444);
 MODULE_PARM_DESC(blink, "Enable LED blink on activity");
 
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
 static int ath9k_btcoex_enable;
 module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
 MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	if (ret)
 		return ret;
 
+	if (ath9k_led_active_high != -1)
+		ah->config.led_active_high = ath9k_led_active_high == 1;
+
 	/*
 	 * Enable WLAN/BT RX Antenna diversity only when:
 	 *
-- 
2.5.0

[ath9k-devel] [added to the 4.1 stable tree] ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.

[Sasha Levin]

From: "Vittorio Gambaletta (VittGam)" <linux-wireless@vittgam.net>

This patch has been added to the 4.1 stable tree. If you have any
objections, please let us know.

===============

[ Upstream commit 0f9edcdd88a993914fa1d1dc369b35dc503979db ]

The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity
(active high instead of active low).

The same PCI Subsystem ID is used by both cards, which are based on
the same Atheros MB92 design.

Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
---
 drivers/net/wireless/ath/ath9k/pci.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index e6fef1b..7cdaf40 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -28,6 +28,16 @@ static const struct pci_device_id ath_pci_id_table[] = {
 	{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
 	{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
 	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
+
+#ifdef CONFIG_ATH9K_PCOEM
+	/* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0029,
+			 PCI_VENDOR_ID_ATHEROS,
+			 0x2096),
+	  .driver_data = ATH9K_PCI_LED_ACT_HI },
+#endif
+
 	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
 
 #ifdef CONFIG_ATH9K_PCOEM
-- 
2.5.0