* [ath9k-devel] MCI howto?
@ 2016-05-29 18:14 Adrian Chadd
2016-06-03 4:44 ` sandeep suresh
0 siblings, 1 reply; 5+ messages in thread
From: Adrian Chadd @ 2016-05-29 18:14 UTC (permalink / raw)
To: ath9k-devel
hiya!
I'm trying to bring up MCI bluetooth coexistence on the QCA9565 on
FreeBSD. I'm having no end of trouble - it seems that no matter what I
do, the bluetooth always wins and the wifi side disconnects when the
bt does an active scan (HCI "inquiry".)
Does anyone remember the deep and amusing details about MCI support
and how to debug this? I'm sure it's something stupid, but my time at
QCA involved 2-wire and 3-wire coex (which you can debug with a
scope), not MCI :(
Thanks!
-adrian
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ath9k-devel] MCI howto?
2016-05-29 18:14 [ath9k-devel] MCI howto? Adrian Chadd
@ 2016-06-03 4:44 ` sandeep suresh
2016-06-04 17:02 ` Adrian Chadd
0 siblings, 1 reply; 5+ messages in thread
From: sandeep suresh @ 2016-06-03 4:44 UTC (permalink / raw)
To: ath9k-devel
Adrian, can you please share the details on the MCI protocol specifications?Thanks & regards
Sandeep.
On Sunday, 29 May 2016 11:44 PM, Adrian Chadd <adrian@freebsd.org> wrote:
hiya!
I'm trying to bring up MCI bluetooth coexistence on the QCA9565 on
FreeBSD. I'm having no end of trouble - it seems that no matter what I
do, the bluetooth always wins and the wifi side disconnects when the
bt does an active scan (HCI "inquiry".)
Does anyone remember the deep and amusing details about MCI support
and how to debug this? I'm sure it's something stupid, but my time at
QCA involved 2-wire and 3-wire coex (which you can debug with a
scope), not MCI :(
Thanks!
-adrian
_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20160603/0e3ad314/attachment.htm
^ permalink raw reply [flat|nested] 5+ messages in thread* [ath9k-devel] MCI howto?
2016-06-03 4:44 ` sandeep suresh
@ 2016-06-04 17:02 ` Adrian Chadd
2016-06-06 6:37 ` sandeep suresh
0 siblings, 1 reply; 5+ messages in thread
From: Adrian Chadd @ 2016-06-04 17:02 UTC (permalink / raw)
To: ath9k-devel
i'm documenting more details in freebsd as I figure stuff out. I'll
write up a webpage with what I can glean from the drivers/headers.
-adrian
On 2 June 2016 at 21:44, sandeep suresh <sandeep.suresh@yahoo.co.in> wrote:
> Adrian, can you please share the details on the MCI protocol specifications?
> Thanks & regards
> Sandeep.
>
>
> On Sunday, 29 May 2016 11:44 PM, Adrian Chadd <adrian@freebsd.org> wrote:
>
>
> hiya!
>
> I'm trying to bring up MCI bluetooth coexistence on the QCA9565 on
> FreeBSD. I'm having no end of trouble - it seems that no matter what I
> do, the bluetooth always wins and the wifi side disconnects when the
> bt does an active scan (HCI "inquiry".)
>
> Does anyone remember the deep and amusing details about MCI support
> and how to debug this? I'm sure it's something stupid, but my time at
> QCA involved 2-wire and 3-wire coex (which you can debug with a
> scope), not MCI :(
>
> Thanks!
>
>
> -adrian
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ath9k-devel] MCI howto?
2016-06-04 17:02 ` Adrian Chadd
@ 2016-06-06 6:37 ` sandeep suresh
2016-06-06 23:58 ` Adrian Chadd
0 siblings, 1 reply; 5+ messages in thread
From: sandeep suresh @ 2016-06-06 6:37 UTC (permalink / raw)
To: ath9k-devel
Thanks Adrian. In the meatime, can you share the link in FreeBSD where we can look into the code?Thanks.
Sandeep.
On Saturday, 4 June 2016 10:32 PM, Adrian Chadd <adrian@freebsd.org> wrote:
i'm documenting more details in freebsd as I figure stuff out. I'll
write up a webpage with what I can glean from the drivers/headers.
-adrian
On 2 June 2016 at 21:44, sandeep suresh <sandeep.suresh@yahoo.co.in> wrote:
> Adrian, can you please share the details on the MCI protocol specifications?
> Thanks & regards
> Sandeep.
>
>
> On Sunday, 29 May 2016 11:44 PM, Adrian Chadd <adrian@freebsd.org> wrote:
>
>
> hiya!
>
> I'm trying to bring up MCI bluetooth coexistence on the QCA9565 on
> FreeBSD. I'm having no end of trouble - it seems that no matter what I
> do, the bluetooth always wins and the wifi side disconnects when the
> bt does an active scan (HCI "inquiry".)
>
> Does anyone remember the deep and amusing details about MCI support
> and how to debug this? I'm sure it's something stupid, but my time at
> QCA involved 2-wire and 3-wire coex (which you can debug with a
> scope), not MCI :(
>
> Thanks!
>
>
> -adrian
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20160606/da46e236/attachment.htm
^ permalink raw reply [flat|nested] 5+ messages in thread* [ath9k-devel] MCI howto?
2016-06-06 6:37 ` sandeep suresh
@ 2016-06-06 23:58 ` Adrian Chadd
0 siblings, 0 replies; 5+ messages in thread
From: Adrian Chadd @ 2016-06-06 23:58 UTC (permalink / raw)
To: ath9k-devel
github.com/freebsd/freebsd - in sys/dev/ath/if_ath_btcoex_mci.[ch] and
the HAL in sys/contrib/dev/ath/ath_hal/ar9300/
-a
On 5 June 2016 at 23:37, sandeep suresh <sandeep.suresh@yahoo.co.in> wrote:
> Thanks Adrian. In the meatime, can you share the link in FreeBSD where we
> can look into the code?
> Thanks.
> Sandeep.
>
>
> On Saturday, 4 June 2016 10:32 PM, Adrian Chadd <adrian@freebsd.org> wrote:
>
>
> i'm documenting more details in freebsd as I figure stuff out. I'll
> write up a webpage with what I can glean from the drivers/headers.
>
>
>
> -adrian
>
>
> On 2 June 2016 at 21:44, sandeep suresh <sandeep.suresh@yahoo.co.in> wrote:
>> Adrian, can you please share the details on the MCI protocol
>> specifications?
>> Thanks & regards
>> Sandeep.
>>
>>
>> On Sunday, 29 May 2016 11:44 PM, Adrian Chadd <adrian@freebsd.org> wrote:
>>
>>
>> hiya!
>>
>> I'm trying to bring up MCI bluetooth coexistence on the QCA9565 on
>> FreeBSD. I'm having no end of trouble - it seems that no matter what I
>> do, the bluetooth always wins and the wifi side disconnects when the
>> bt does an active scan (HCI "inquiry".)
>>
>> Does anyone remember the deep and amusing details about MCI support
>> and how to debug this? I'm sure it's something stupid, but my time at
>> QCA involved 2-wire and 3-wire coex (which you can debug with a
>> scope), not MCI :(
>>
>> Thanks!
>>
>>
>> -adrian
>> _______________________________________________
>> ath9k-devel mailing list
>> ath9k-devel at lists.ath9k.org
>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>>
>>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-06-06 23:58 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-29 18:14 [ath9k-devel] MCI howto? Adrian Chadd
2016-06-03 4:44 ` sandeep suresh
2016-06-04 17:02 ` Adrian Chadd
2016-06-06 6:37 ` sandeep suresh
2016-06-06 23:58 ` Adrian Chadd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).