From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Wunderlich Date: Tue, 4 Sep 2012 19:12:15 +0200 Subject: [ath9k-devel] AR9330 hornet board stops beaconing after a few days (0xdeadbeef) In-Reply-To: References: <20120813165340.GA10044@pandem0nium> <20120819220436.GA9899@pandem0nium> <20120902200102.GA28313@pandem0nium> Message-ID: <20120904171215.GA5953@pandem0nium> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Shafi, On Mon, Sep 03, 2012 at 07:23:26PM +0530, Mohammed Shafi wrote: > seems we are getting beacon stuck, though its not sufficient for triggering > chip reset (or) atleast start noise floor calibration. Is this is in a congested > environment ? we can dump cycle counters . I think we need to have a > WAR of chip reset if the cycle counters (busy is too high) inspite the MAC hang > signature . let me try too to figure out that WAR is already available (or) > we got to enable it. I'm living at a small village, and one or two neighbors may have access points too, but that's it - this should be far from beeing busy. We mostly use these APs for surfing with smart phones, this is also far from congesting them. ;) TBH I don't really understand what you are talking about regarding WAR, etc, can you please explain? What can we do to analyse the problem better? Thanks, Simon -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: Digital signature Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120904/4c941d68/attachment.pgp