[ath9k-devel] [PATCH 4.6 038/121] ath9k: Add a module parameter to invert LED polarity.

[ath9k-devel] [PATCH 4.6 038/121] ath9k: Add a module parameter to invert LED polarity.

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vittorio Gambaletta (VittGam) <linux-wireless@vittgam.net>

commit cd84042ce9040ad038e958bc67a46fcfc015c736 upstream.

The LED can be active high instead of active low on some hardware.

Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.

Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.

Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/init.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int ath9k_led_blink;
 module_param_named(blink, ath9k_led_blink, int, 0444);
 MODULE_PARM_DESC(blink, "Enable LED blink on activity");
 
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
 static int ath9k_btcoex_enable;
 module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
 MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, s
 	if (ret)
 		return ret;
 
+	if (ath9k_led_active_high != -1)
+		ah->config.led_active_high = ath9k_led_active_high == 1;
+
 	/*
 	 * Enable WLAN/BT RX Antenna diversity only when:
 	 *

[ath9k-devel] [PATCH 4.6 039/121] ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vittorio Gambaletta (VittGam) <linux-wireless@vittgam.net>

commit 0f9edcdd88a993914fa1d1dc369b35dc503979db upstream.

The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity
(active high instead of active low).

The same PCI Subsystem ID is used by both cards, which are based on
the same Atheros MB92 design.

Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/pci.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -28,6 +28,16 @@ static const struct pci_device_id ath_pc
 	{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
 	{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI   */
 	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
+
+#ifdef CONFIG_ATH9K_PCOEM
+	/* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+			 0x0029,
+			 PCI_VENDOR_ID_ATHEROS,
+			 0x2096),
+	  .driver_data = ATH9K_PCI_LED_ACT_HI },
+#endif
+
 	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
 
 #ifdef CONFIG_ATH9K_PCOEM